• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.235-241
• /
• 1991

- A phthalic acid derivative and basic macrolide antibiotics, with antimicrobial activity against Gram positive bacteria and phytopathogenic fungi, respectively, were found to be produced by a strain 88-GT-161 identified as being a variety of Streptomyces melanosporofaciens. This paper describes an isolation procedure of the active compounds produced by this strain, their in vitro and in vivo (pot test) antimicrobial activites, and structure determination of one of the compounds, bis (2-ethylhexyl) phthalate, a phthalic acid derivative antibiotic. This compounds, upon cornparision with authentic bis (2-ethylhexyl) phthalate, dioctyl phthalate, revealed a difference in antimicrobial activity even though physico-chemical properties of these two compounds seemed indentical. This is the first report that dioctyl phthalate is biosynthetically produced by a Streptomyces sp. and shows antimicrobial activity.

• Environmental Analysis Health and Toxicology
• /
• v.4 no.1_2
• /
• pp.67-73
• /
• 1989

Recently pathotoxicological study of lymphoid organs by administration of some phthalate ester in rats, indicated marked effect of architechure of thymus, spleen, and lymphonodes. Dioctyl phthalate (DOP), one of the phthalate ester, caused statistically significant reduction in the weights of various lymphoid organs. This senstivity of the lymphoid organ to phthalate toxicity which could lead to adverse effects on the immune response and also suppression of immune system. Therfore it is possible the presense of di-(2-ethylhexyl) phthalate (DEHP), one of the phthalate ester as well as DOP, in spleen and other organs might have some moderately effect on the function of the immune system, So our present study was proceeded to assess the effect of DEHP on the immunotoxicity in mouse. In the immune response of DEHP administered mice, HA, HY, Arthus reaction and Rosette forming cell were decreased but DTH was increased. Furthermore, in the DEHP plus ethanol group, HA, HY, Arthus reaction and Rosette forming cell were remarkably decreased and elevation of DTH was inhibited.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1909-1918
• /
• 2014

In this experiment no solvent based polyurethane(PU) adhesives were prepared with the polyol, isocyanate, dioctyl phthalate(DOP), 2-hydroxyethylacrylate(2-HEA) and other acrylate monomers. The softenening point of the PU adhesives measured by Ring & Ball method were examined in the present study. And adhesion strength and mechanical properties such as tensile strength and 100% modulus of the PU adhesives were evaluated by Universal Test Machine. The experimental results showed that increase of both DPE-41, benzoylperoxide(BPO) and toluene diisocyanate(TDI) increased softenening point, adhesion strength, tensile strength and 100% modulus. However as DOP content increased sofenening point, adhesion strength decreased and tensile strength, 100% modulus also decreased.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.350-357
• /
• 2017

In this study, we used TIPS (thermally induced phase separation) for the application of water treatment membrane, and observed the change in morphology of separation membrane due to the change of solidification temperature and heat capacity. For manufactured membrane, PVDF and silica with excellent mechanical properties and chemical resistance were used, and DOP (dioctyl phthalate), DBP (dibutyl phthalate) were used as the diluent. Using the SEM (scanning electron microscope), the morphology of each different coagulation solutions of heat capacity change was observed. As the heat capacity increased, the crystallization rate of PVDF was decreased and showed large pore. In contrast, It also confirmed that the smaller heat capacity, the faster the crystallization rate and make smaller pores.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.365-370
• /
• 2014

Objectives: The major objective is development of an eco-friendly non-phthalate plasticizer using crude glycol derived from the biodiesel process. Methods: Glycerol monolaurate(GML) was synthesized from glycol and triglyrcerides. Glycerol diacetomonolaurate(GDAL) was synthesized from GML and acetic acid. Results: The synthesis of the GDAL plasticizer was measured with nuclear magnetic resonance spectroscopy(NMR). Mechanical properties were measured by universal testing machine(UTM) and the experimental values were compared with phthalate plasticizers such as dioctyl phthalate(DOP). In particular, the values for tensile strength and elongations with GDAL were higher than with DOP. Conclusions: We confirmed the development of an eco-friendly non-phthalate plasticizer by NMR. Based on our results, applicability for food and drug packaging materials was found.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.189-198
• /
• 2017

In this study, we used thermally induced phase separation (TIPS) to produce water treatment membrane and poly(vinylidene fluoride) (PVDF), silica with excellent mechanical properties and chemical resistance to evaluate characterization of the membrane. The diluents used for the characterization were dioctyl phthalate (DOP) and dibutyl phthalate (DBP). We observed the crystallization temperature, cloud point and SEM images to see the manufacture conditions according to the ratio of PVDF and silica. The crystallization temperature and cloud point increased with the contents of silica. Through the phase diagram drawn from these results, the conditions for the preparation of the membrane confirmed.

• Macromolecular Research
• /
• v.15 no.7
• /
• pp.656-661
• /
• 2007

The effects of a neutral solvent of dioctyl phthalate (DOP) on the phase behavior of symmetric polystyrene-block-poly(n-butyl methacrylate) copolymers (PS-b-PnBMA) were assessed herein. Closed-loop phase behavior with a lower disorder-to-order transition (LDOT) and an upper order-to-disorder transition (UODT) was observed for PS-b-PnBMA/DOP solution when the quantity of DOP was carefully controlled. When the molecular weight of PS-b-PnBMA became larger, the LDOT did not appreciably change at smaller quantities of DOP. With larger quantities of DOP, the reduction in the UODT is greater than the increase in the LDOT. This behavior is discussed in accordance with a molecular theory predicated on a compressible random-phase approximation.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.154-158
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about 1${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.746-750
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about l${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.