• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.190-196
• /
• 1998

A new sampling and size exclusion chromatography (SEC) method for the analysis of underivatized cellulose are established. In this method, cellulose materials are first dissolved in N-methylmorpholine N-oxide (NMMO) and diluted by adding dimethyl sulfoxide (DMSO) to make the sample solutions of about 0.1% in 50/50 NMMO/DMSO (w/w). Sample solutions are analyzed using a glucose-treated divinylbenzene (DVB) SEC column and DMSO containing 0.05M LiBr and 2.5 blank as the eluant. The flow rate was constant at 1 mL/min and the whole SEC system including the column was heated at $80^{\circ}C$ to reduce the viscosity of DMSO. Addition of 0.05 M LiBr eliminated SEC baseline drifting, and addition of 2.5 blank seems to reduce the interaction between the sample and the column packing. SEC molecular weights were determined using a calibration curve constructed from a series of narrow pullulan standards, and they were used to measure the degree of degradation during two different pulp-to-sponge processings.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.225-229
• /
• 2017

Micron-sized dextran particles, which now attract wide attention as a promising drug delivery systems, can be prepared via the supercritical anti-solvent (SAS) process. In SAS process, dextran particles are obtained as a result of recrystallization of dissolved dextran in dimethyl sulfoxide (DMSO) on addition of supercritical $CO_2$ as an anti-solvent. In this work, with an intention to provide information on the feasible operating conditions of the process, the phase behavior of Dexran/DMSO/$CO_2$ is observed by measuring the cloud point in favor of a variable volume cell. From the experimental study, it is concluded that a feasible operating condition of the SAS process for preparation of dextran particles would be 300.15 K~330.15 K and 90 bar~130 bar, respectively, and solute concentration ranges from 5mg/ml to 20 mg/ml.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.68-75
• /
• 2003

In this work, ultrafiltration(UF) membranes were prepared using polyethersulfone(PES). The polymer was dissolved in various solvent, such as N, N-dimethyl formamide(DMF), N,-dimethyl acetamide (DMAc), N,N-dimethyl sulfoxide(DMSO) and N-methyl-2- pynolidone(NMP). Each polymer solution was casted on the glass plate, and immersed into non-solvent bath. In this way finely porous UF membranes were prepared by phase inversion method. The cross sectional structure of PES membrane was asymmetric which was consist of sponge-like sublayer, finger-like toplayer, and active skin layer. From the solute rejection experiments, the molecular weight cut off of the prepared membrane in various solvent was evaluated 10,000 for DMF, 30,000 for DMAc, 50,000 for DMSO, and 10,000 for NMP respectively.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.127-131
• /
• 2003

Acrylonitrile(AN) was solution-polymerized in dimethyl sulfoxide(DMSO) and tertiary butyl alcohol(TBA) at 30, 40, $50^\circ{C}$ using a low temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN). The low temperature polymerization using ADMVN, DMSO, and TBA is to be successful in obtaining high molecular weight polyacrylonitrile(PAN) with less branches by solution polymerization. Throug a polymerization of AN in DMSO at $30^\circ{C}$, PAN having viscosity-average molecular weight$(M_v)$ of 931,000 was obtained. And then, during AN solution polymerization in DMSO and TBA using a cosolvent system the in-situ formation of microfibrillar structure has been discovered at the cosolvent composition of 24/1$(V_{DMSO}/V_{TBA})$. The simultaneous process of gelation and phase separation of long chain molecules may explain the in-situ formation of PAN fibers during polymerization.

• Journal of Life Science
• /
• v.32 no.8
• /
• pp.611-621
• /
• 2022

Dimethyl sulfoxide (DMSO) is commonly used as control or vehicle solvent in preclinical research of neurodegenerative diseases such as amyotrophic lateral sclerosis (ALS) due to its ability to dissolve lipophilic compounds and cross the blood brain barrier. However, the biochemical effects of DMSO on the outcomes of preclinical research are often overlooked. In the present study, we investigated whether the long-term oral administration of 5% DMSO affects the neurological, functional, and histological disease phenotype of the copper/zinc superoxide dismutase glycine 93 to alanine mutation (SOD1-G93A) mouse model of amyotrophic lateral sclerosis. SOD1-G93A transgenic mice showed shortened survival time and reduced motor function. We found that administration with DMSO led to increased mean survival time, reduced neurological scores, and improved motor performance tested using the rotarod and grip strength tests. On the other hand, DMSO treatment did not attenuate motor neuron loss in the spinal cord and denervation of neuromuscular junctions in the skeletal muscle. These results suggest that DMSO administration could improve the quality of life of the SOD1-G93A mouse model of ALS without affecting motor neuron denervation. In conclusion, the use of DMSO as control or vehicle solvent in preclinical research may affect the behavioral outcomes in the SOD1-G93A mouse model. The effect of the vehicle should be thoroughly considered when interpreting therapeutic efficacy of candidate drugs in preclinical research.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.95-97
• /
• 2008

In this study eco-friendly wax remover for printing table of flat screen was investigated. Seven organic solvents, diethylene glycol monomethyl ester, triethylene glycol monomethyl ester, triethylene glycol monobutyl ester, tripropylene glycol monomethyl ester, dimethyl sulfoxide(DMSO), trichloro ethylene(TCE), tolune, were used as resin wax remover. The resin wax solubility with solvents was investigated. DMSO was found to be the most suitable eco-friendly resin wax remover.

• Journal of Aquaculture
• /
• v.19 no.1
• /
• pp.52-56
• /
• 2006

This study was conducted to investigate the effects of three different concentrations (6%, 8% and 10% final volume) of dimethyl sulfoxide (DMSO) on cryopreserved sperm of grass carp (Ctenopharyngodon idellus). Grass carp sperm was suspended in Kurokura extender #2 and equilibrated at $4^{\circ}C$ for 10 min. French straws (0.25 ml) of sperm were frozen from $4^{\circ}C\;to\;-4^{\circ}C$ at a rate of $4^{\circ}C\;min^{-1}$ and then ken $-4^{\circ}C\;to\;-80^{\circ}C$ at a rate of $11^{\circ}C\;min^{-1}$. The straws were kept at $-80^{\circ}C$ for 10 min and finally stored in liquid nitrogen $(-196^{\circ}C)$. The cryopreserved sperm was thawed in a water bath at $40^{\circ}C$ for 30 sec and fertilization, hatching rate and larval malformation were compared with fresh sperm (control). The fertilization rate of post-thawed sperm was comparable (from 88.21% to 94.30%) to that of fresh sperm. However, hatching rate of all frozen sperm were significantly lower (P<0.05) than that of control. Additionally, the larval abnormality rate of frozen sperm was significantly higher than that of fresh sperm. The results indicate that DMSO could affect the quality of cryopreserved sperm of grass carp, and a freezing program and a proper extender composition should be further studied.

• Development and Reproduction
• /
• v.3 no.1
• /
• pp.107-111
• /
• 1999

To find out the desirable cryoprotectant for cryopreservation of bivalve trochophores, four types of cryoprotectant were tested with trochophores of the pearl oyster (pinctada fucata martensii) generally used in the pearl production in Korea. Each cryoprotectant (dimethyl sulfoxide, ethylene glycol, glycerol and 1,2-propanediol) was mixed with 0.2 M sucrose to make final concentrations of 0.01, 0.1, 1.0 and 2.0 M. The trochophores were immersed in each preparation, waiting for 10 minutes to reach equilibration and cryopreserved in the liquid nitrogen (-l96$^{\circ}C$). Survival rate of trochophores thawed after cryopreservation increased as the media concentration increase. However, a few number of the trochophores seemed to be damaged with the efflux of cell inclusions. Our study rsults indicate that desirable cryoprotectants for cryopreservation of pearl oyster trochophores are 1.0~2.0 M dimethyl sulfoxide and ethylene glycol : 82.8~97.4% of the trochophores cryopreserved with these media survived after thawing.

• Development and Reproduction
• /
• v.5 no.1
• /
• pp.35-38
• /
• 2001

This study was peformed to find out the optimum larval stage among trochophore, early Dshaped larva, late D-shaped larva, early umbo and late umbo stages for cryopreservation of surf clam, Spisula sachalinensis larvae. Dimethyl sulfoxide (DMSO)and ethylene glycol were used as cryoprotectant, The larvae were immersed to cryoprotectants for 10 minutes and thereafter, cryopreserved in liquid nitrogen. Survival rates of trochophores frozen-thawed in 2.0 M dimethyl sulfoxide and 2.0 M ethylene glycol were the highest as 97.4% and 85.0%, respectively and post-thaw survival rates were decreased with the larval growth.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.586-589
• /
• 2010

In present work, oxidative addition reaction of 1,3-cycleohexandion (1,3-CHD) with ethyl vinyl ether (EVE) was attempted utilizing $Ag_2CO_3$/celite (SC) reagent. In order to optimize reaction conditions, we surveyed several solvents for the production of dihydrofuran with the (SC) system. The yield of the acetonitrile (AN), dimethyl sulfoxide (DMSO), benzene (BZ), and heptane (HT) are given 78, 40, 15, and 10%, respectively. Therefore, we studied the solvent effects on yields by using PM3 and ZINDO/1 parameter of semi-empirical method of HyperChem7.0 molecular modeling program.