• 한국안전학회지
• /
• 제38권5호
• /
• pp.8-14
• /
• 2023

Lithium ions can induce the thermal runaway phenomenon and lead to reignition due to electrical, mechanical, and environmental factors such as high temperature, smoke generation, explosions, or flames, which is extremely likely to create safety concerns. Therefore, one of the ways to improve the flame retardancy of the electrolyte is to use a flame-retardant additive. Comparing the associated characteristic value of existing substances with the required experimental value, it was found that these values were either considerably different or were not documented. It is vital to know a substance's combustion characteristic values, flash point, explosion limit, and autoignition temperature (AIT) as well as its combustion characteristics before using it. In this research, the flash point and AIT of materials were measured by mixing a highly volatile and flammable substance, diethyl carbonate (DEC), with flame-retardant dimethyl methylphosphonate (DMMP). The flash point of DEC, which is a pure substance, was 29℃, and that for DMMP was 65℃. Further, the lower explosion limit calculated using the measured flash point of DEC was 1.79 Vol.%, while that for DMMP was 0.79 Vol.%. The AIT was 410℃ and 390℃ for DEC and DMMP, respectively. In particular, since the AIT of DMMP has not been discussed in any previous study, it is necessary to ensure safety through experimental values. In this study, the experimental and regression analysis revealed that the average absolute deviation (ADD) for the flash point of the DEC+DMMP DEC+DMMP system is 0.58 sec and that the flash point tends to increase according to changes in the composition employed. It also revealed that the AAD for the AIT of the mixture was 3.17 sec and that the AIT tended to decrease and then increase based on changes in the composition.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.636-643
• /
• 2006

연속식 SCWO 반응기를 이용하여 DMMP의 초임계수 산화반응을 반응온도 $440{\sim}540^{\circ}C$, 반응압력 242 bar, 체류시간 10~26 초, 과잉산소량 -40~200％의 조건 하에서 수행하였다. 반응온도 $540^{\circ}C$에서 DMMP 분해율은 99.7% 이상으로 높았으며, DMMP의 농도가 증가함에 따라 DMMP 분해율은 증가하였다. 산화제 농도 변화에 따른 분해율은 양론비 이하에서는 현저하게 영향을 받았으나, 양론비 이상에서는 큰 차이가 없었다. DMMP 분해율이 85% 이상인 30개의 실험결과로부터 DMMP의 초임계수 산화반응 속도식을 도출하였다. Pre-exponential factor는 $(1.10{\pm}0.76){\times}10^6$, 반응 활성화에너지는 $90.66{\pm}3.87kJ/mol$, DMMP와 산소에 대한 반응차수는 각각 $1.02{\pm}0.03$, $0.32{\pm}0.03$로 모델에 의한 예측값과 실험값은 잘 일치하였다.

• 공업화학
• /
• 제29권2호
• /
• pp.191-195
• /
• 2018

본 실험에서는 활성탄소섬유의 미세기공구조가 신경작용제 유사가스인 dimethyl methylphosphonate (DMMP) 감응 특성에 미치는 영향을 고찰하였다. 탄소섬유에 화학적 활성화법을 이용하여 기공구조를 부여하였고, 이를 이용하여 가스센서용 전극을 제조하였다. N형 반도체인 polyacrylonitrile (PAN)계 활성탄소섬유 기반 전극은 환원성 가스인 DMMP로부터 전자를 받아 정공의 밀도 감소로 인하여 전기저항이 감소하게 되었다. DMMP 가스센서의 민감도는 미세기공 부피가 증가함에 따라 1.7%에서 5.1%까지 증가하였다. 이는 분자 크기가 0.57 nm인 DMMP를 흡착하기에 적합한 미세기공이 형성됨에 따라, DMMP와 활성탄소섬유간의 전자 이동이 용이해졌기 때문이라 사료된다. 결론적으로, 높은 감도의 DMMP 가스센서를 제조하기 위해서는 적절한 기공구조 조절이 중요한 역할을 한다고 판단된다.

• 공업화학
• /
• 제30권6호
• /
• pp.719-725
• /
• 2019

본 실험에서는 활성탄소섬유에 산소플라즈마 처리를 실시하여 산소작용기 도입 함량에 따른 유독성 화학작용제의 모사 가스인 dimethyl methylphosphonate (DMMP) 감응특성에 대하여 고찰하였다. 산소플라즈마 처리 유량이 증가할수록 활성탄소섬유 표면에 산소가 6.90%에서 최대 36.6%까지 도입되어 DMMP 가스 감응특성에 영향을 미치는 -OH가 증가하였다. 그러나 유량이 증가할수록 산소플라즈마 처리 시 발생한 산소 활성종으로 인하여 활성탄소섬유 표면에 식각이 발생하여 비표면적은 감소하는 경향을 보였다. DMMP 가스센서의 저항변화율은 산소플라즈마 처리 유량이 증가함에 따라 4.2%에서 최대 25.1%까지 증가하였다. 이는 산소플라즈마 처리로 인하여 활성탄소섬유에 발달된 -OH와 DMMP 가스의 수소결합으로 인한 것이라 여겨진다. 따라서 산소플라즈마 처리는 상온에서 유독성화학작용제 가스를 감지하기 위한 중요한 표면처리 방법 중 하나라고 판단된다.

• 센서학회지
• /
• 제20권5호
• /
• pp.294-299
• /
• 2011

$SnO_2$ nanoparticles were synthesized by a hydrothermal method and gas sensors were fabricated using nanoparticles to detect dimethyl methylphosphonate(DMMP) gas. The prepared $SnO_2$ nanoparticles exhibited a high response(72 at $500^{\circ}C$) to 5 ppm DMMP gas compared to commercial $SnO_2$ nanopowders, but their recovery was relatively poor. Various metals(Ni, Sb, Nb) were added to the $SnO_2$ nanoparticles to improve their recovery properties. The focus of this study was to investigate the effects of metal oxide additives on DMMP sensing behavior in $SnO_2$ nanoparticles.

• 멤브레인
• /
• 제23권3호
• /
• pp.237-244
• /
• 2013

수증기 투과는 용이하게 하면서 Dimethyl methylphosphonate (DMMP)에 대한 방호성능을 부여하는 선택투과성능을 가지도록 고안된 몇가지 복합막을 제조하였다. 선택투과막 재료는 폴리비닐알코올 고분자를 기반으로 염기성 작용기를 가지는 기능성 고분자를 포함하도록 하였다. 이들 재료를 사용하여 화생방호성능을 보유한 차세대 소재로서의 가능성을 확인하기 위하여 선택투과능을 평가하였다. 시험한 결과, 폴리비닐알코올/폴리에틸렌이민 소재가 우수한 수증기 투과성능($2,200{\sim}2,900g/m^2/day$) 및 DMMP 증기 방호성능($47g/m^2/day$)을 가지는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1967-1971
• /
• 2013

Aim of our study is finding adsorbents suitable for pre-concentration of chemical warfare agents (CWAs). We considered Tenax, bare silica and polydimethylsiloxane (PDMS)-coated silica as adsorbents for dimethyl methylphosphonate (DMMP) and dipropylene glycol methyl ether (DPGME). Tenax showed lower thermal stability, and therefore, desorption of CWA simulants and decomposition of Tenax took place simultaneously. Silica-based adsorbents showed higher thermal stabilities than Tenax. A drawback of silica was that adsorption of CWA simulant (DMMP) was significantly reduced by pre-treatment of the adsorbents with humid air. In the case of PDMS-coated silica, influence of humidity for CWA simulant adsorption was less pronounced due to the hydrophobic nature of PDMS-coating. We propose that PDMS-coated silica can be of potential importance as adsorbent of CWAs for their pre-concentration, which can facilitate detection of these CWAs.

• 센서학회지
• /
• 제23권4호
• /
• pp.217-223
• /
• 2014

Nerve agents are major chemical warfare agents with the "G series" and "V series" being the most widely known because of their lethal effect. Although not conspicuously used in major wars, the potential detrimental impact on modern society had been revealed from the sarin terror attack on Tokyo subway, which affected thousands of people. In this mini-review, major nerve agents of the "G series" and "V series" have been described along with various types of their detection methods. The physical properties and hydrolysis mechanisms of the major nerve agents are discussed since these are important factors to be considered in choosing detection methods, and specifying the procedures for sample preparations in order to enhance detection precision. Various types of extraction methods, including liquid-phase, solid-phase, gas-phase and solid-phase microextraction (SPME), are described. Recent development in the use of gas sensors for detecting nerve agents is also summarized.

• Carbon letters
• /
• 제6권3호
• /
• pp.158-165
• /
• 2005

Room temperature kinetics of degradation of nerve agent simulants and sarin, an actual nerve agent at the surface of different carbon based adsorbent materials such as active carbon grade 80 CTC, modified whetlerite containing 2.0 and 4.0 % NaOH, active carbon with 4.0 % NaOH, active carbon with 10.0 % Cu (II) ethylenediamine and active carbon with 10.0 % Cu (II) 1,1,1,5,5,5-hexafluoroacetylacetonate were studied. The used adsorbent materials were characterized for surface area and micropore volume by $N_2$ BET. For degradation studies solution of simulants of nerve agent such as dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DEClP), diethyl cyanophosphate (DECnP) and nerve agent, i.e., sarin in chloroform were prepared and used for the uniform adsorption on the adsorbent systems using their incipient volume at room temperature. Degradation kinetics was monitored by GC/FID and was found to be following pseudo first order reaction. Kinetics parameters such as rate constant and half life were calculated. Half life of degradation with modified whetlerite (MWh/NaOH) system having 4.0 % NaOH was found to be 1.5, 7.9, 1206 and 20 minutes for DECnP, DEClP, DMMP and sarin respectively. MWh/NaOH system showed maximum degradation of simulants of nerve agents and sarin to their hydrolysis products. The reaction products were characterized using NMR technique. MWh/NaOH adsorbent was also found to be active against sulphur mustard.