• 복식
• /
• 제55권5호
• /
• pp.55-64
• /
• 2005

The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.

• 한국정보과학회논문지:데이타베이스
• /
• 제33권7호
• /
• pp.693-707
• /
• 2006

대부분의 유사 시퀀스 매칭 방법은 다차원 색인을 사용한 검색 속도의 향상을 위해, 많은 수의 고차원 시퀀스를 저차윈 변환한 후 이들 변환된 시퀀스들을 포함하는 저차원 MBR을 구성한다. 본 논문에서는 고차원 MBR자체를 직접 저차원 MBR로 변환하는 정형적인 방법을 제안하고, 이를 사용하면 유사 시퀀스 매칭에서 필요한 저차원 변환 횟수를 획기적으로 줄일 수 있음을 보인다. 이를 위해, 우선 변환의 MBR-safe 개념을 정형적으로 제안한다. 어떤 변환이 MBR-safe하다 함은 고차원 MBR을 직접 변환한 저차원 MBR이 개별 고차원 시퀀스가 변환된 저차원 시퀀스를 모두 포함함을 의미한다. 다음으로, 기존 저차원 변환 중에서 가장 널리 사용되는 DFT와 DCT에 대해 각각 MBR-safe 변환을 제안한다. 먼저, 기존 DFT와 DCT가 MBR-safe하지 않음을 보이고, DFT와 DCT를 확장한 mbrDFT와 mbrDCT를 각각 정의한다. 그리고, 이들 mbrDFT와 mbrDCT가 MBR-safe함을 정형적으로 증명한다. 또한, mbrDFT(흑은 mbrDCT)가 고차원 MBR을 저차원 MBR로 직접 변환하는 DFT(혹은 DCT) 기반의 최적 MBR-safe 변환임을 증명한다. 분석과 실험 결과, 제안한 mbrDFT 및 mbrDCT를 사용하면 저차원 변환 횟수를 획기적으로 줄이고 성능을 크게 향상 시킨 것으로 나타났다. 이 같은 결과를 볼 때, 본 논문에서 제시한 MBR-safe 개념은 고차원 MBR의 저차원 변환이 필요한 많은 응용에 활용될 수 있는 유용한 연구 결과라 사료된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.311-314
• /
• 2006

The supersonic flow around tandem cavities was investigated by three- dimensional numerical simulations using the Reynolds-Averaged Navier-Stokes(RANS) equation with the $\kappa-\omega$ thrbulence model. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves, and the acoustic effect transmitted from wake flow to upstream. The upwind TVD scheme based on the flux vector split using van Leer's limiter was used as the numerical method. Numerical calculations were performed by the parallel processing with time discretizations carried out by the 4th-order Runge-Kutta method. The aspect ratio of cavities are 3 for the first cavity and 1 for the second cavity. The ratio of cavity interval to depth is 1. The ratio of cavity width to depth is 1 in the case of three dimensional flow. The Mach number and the Reynolds number were 1.5 and $4.5{\times}10^5$, respectively. The characteristics of the dominant frequency between two-dimensional and three-dimensional flows were compared, and the characteristics of the second cavity flow due to the fire cavity flow cavity flow was analyzed. Both two dimensional and three dimensional flow oscillations were in the 'shear layer mode', which is based on the feedback mechanism of Rossiter's formula. However, three dimensional flow was much less turbulent than two dimensional flow, depending on whether it could inflow and outflow laterally. The dominant frequencies of the two dimensional flow and three dimensional flows coincided with Rossiter's 2nd mode frequency. The another dominant frequency of the three dimensional flow corresponded to Rossiter's 1st mode frequency.

• 한국지반환경공학회 논문집
• /
• 제11권11호
• /
• pp.5-18
• /
• 2010

본 연구에서는 지간 15m 이하의 지중파형강판 박스구조물의 3차원 해석 시 적용 가능한 3차원 보강판 모델을 제안하고 검증하였다. 3차원 보강판 모델은 실제 파형강판의 단면계수와 종방향과 길이방향의 단면특성을 고려하여 지중강판 박스구조물을 모델링함으로써, 3차원 해석 시 모델링을 간편하게 하고 해석시간을 단축할 수 있는 유용한 해석 모델이다. 이 모델을 검증하기 위해 3단계의 시공과정(정점부까지의 뒷채움, 토피고까지의 뒷채움, 활하중재하)에 따른 거동분석으로부터 최대 변위와 최대모멘트를 유발하는 재하상태를 도출하였고, 제안된 단면을 통해 파형강판의 거동을 분석하였다. 분석 결과를 3차원 등가판 모델, 2차원 모델, 실제파형강판 구조물과 동일하게 모델링한 3차원 Corrugated 판 모델과 비교 검증하였다. 해석결과 2차원 모델과 3차원 등가판 모델은 활하중 조건에서 3차원 Corrugated 판 모델과 큰 차이를 나타내었으나, 3차원 보강판 모델은 모든 해석 결과에서 3차원 Corrugated 판 모델과 일치하는 결과를 나타내었다.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1732-1736
• /
• 2008

The characteristics of a river flow analysis are significant for river maintenance plan. At the present time, HEC-RAS, 1-Dimensional Numerical Analysis Model, is mainly applied to analyze the character of a river flow. The shape of a river is somewhat in longitudinal linear form. It was suspected that the usage of 1-dimensional numerical analysis model is more economical. Development of numerical analysis models and computers are possible to calculate large volume. Hence, it is possible to adapt the analysis of the key stations by 2-dimensional numerical analysis model. The limitation of 1-Dimensional Numerical Analysis Model is that it is hard to evaluate structure affection of numerical simulation by energy loss coefficient at river structure analyzing. When adaptation of the 2-dimensional numerical analysis model in river structure ensues, it takes more objective analyzing than 1-dimensional numerical analysis model for flow affection by river structure. 2-dimensional numerical analysis model consults with the different structure position of hydraulic characteristics and different water depth of shape and scope in vertical flow. 1-dimensional numerical analysis model is possible to simulate with only energy loss coefficient for sudden river section changing, sudden waterway changing by curved. 2-dimensional numerical analysis model use original geographical features. So the model removes technical subjectivity of faulty judgment. It is an objective analysis.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.1-11
• /
• 2006

본 논문에서는 불연속면이 포함된 다차원 유동에서 흔히 발생하는 수치적 진동현상을 막기 위해 기존의 TVD 제한자를 분석함으로써 새로운 형태의 다차원 제한 함수를 유도하였다. MLP 기법은 유도된 다차원 제한 함수를 기반으로 하며, 다차원 불연속면에서의 수치 진동을 효과적으로 제거하고 동시에 3차 이상의 공간 정확도 내삽기법과 함께 사용할 수 있다는 장점을 갖는다. 또한, 정상 유동의 경우 수치 진동이 제거됨으로써 수렴성이 향상됨을 확인할 수 있었고, 실제 코드에 적용하는 방법도 간단하다. MLP 기법을 적용함으로써 불연속 유동 뿐 만 아니라 연속 유동에서도 정확성, 효율성, 강건성 면에서 향상된 결과를 얻을 수 있음을 여러 가지 수치 실험을 통하여 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-78
• /
• 2012

Rotary kiln furnace is one of the most widely used reactors in industrial field. In this paper, 0-dimensional heat and mass balance for direct coal flame rotary kiln was performed preferentially, then a simplified 1-dimensional model was developed based on 0-dimensional analysis data to proceed additional thermal analysis. Compared the results with the currently operating rotary kiln data to validate 1-dimensional model. Through this procedure, it can help to derive fundamental idea for design and operation of rotary kiln.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.414-421
• /
• 1988

This paper is concerned with a design procedure for constructing finite dimensional compensators for a class of infinite dimensional aystems. Basically, this procedure consists of decomposing the state space of the basis of its modes and utilizing well-known finite dimensional algorithms for constructing observers and state feedback control laws. The finite dimensional observer dynamics is modified to account for the effect of the residual modes so as to achieve the stabelity of the closed loop system asymptotically.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.131-135
• /
• 2006

Many alternatives on the residential open building have been researched for corresponding high flexibility and possibility of remodeling in Korea as well. However, existing researches only dealt with two-dimensional floor plan. All buildings as well as apartment housing must have been examined various spatial aspect, three-dimensional not two-dimensional. It will examine basic method of three-dimensional flexible unit system to add to three-dimensional usage method overcoming these limitations. The purpose of this study is to propose the system of three-dimensional residential open building in Korea after examining possibility of flexibility of residential open building in 1.5 times of existing floor height.