• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1785-1795
• /
• 2001

A multi-layered brick element fur the finite element method is developed for analyzing the three-dim-ensionally layered composite structures subjected to both thermal and mechanical boundary conditions. The element has eight nodes with one degree of freedom for the temperature and three for the display-ements at each node, and can contain arbitrary number of layers with different material properties with-in the element; the conventional element should contain one material within an element. Thus the total number of nodes and elements, which are needed to analyze the multi-layered composite structures, can be tremendously reduced. In solving the global equation, a partitioning technique is used to obtain the temperature and the displacements which are caused by both the mechanical boundary conditions and temperature distributions. The results by using the developed element are compared wish the commercial package, ANSYS and the conventional finite element methods, and they are in good agreement. It is also shown that the Number of nodes and elements can be tremendously reduced using the element without losing the numerical accuracies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.483-486
• /
• 2014

A Visual Light Communication(VLC) system is a concept of converging illumination with communication. Design of the VLC system aims mainly at minimizing flicker for the illumination and maximizing transmission distance for the communication. This paper proposes an effective detection scheme of the transmitted signal by attenuating noises which may be included in the signal, and then presents implementation results. Inserting designated low and high pass filters in first and second implementations, the receiver became to improve the perception rate of transmitted signals. This verified a relatively higher possibility of receiving data in a dim light, so that the communication distance can be expanded in the visual light communication system.

• Fashion & Textile Research Journal
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2024

In recent times, many accidents have occurred due to challenges in accurately identifying the location of workers, posing a significant societal concern demanding resolution. Therefore, it is essential to develop smart luminescent safety attire to enhance worker visibility in dim environments, thereby curbing accidents. In this study, we propose the utilization of textile-based OLED devices in creating smart luminescent safety clothing, aiming to augment the discernibility of workers over extended distances in low-luminance environments. In view of this, we engineered an attachable textile-based OLED module that balances high luminous efficiency with wearer comfort. Subsequently, a prototype smart luminescent safety clothing was demonstrated, and a performance evaluation was conducted to determine whether any discomfort occurred on wearing it. The fabricated OLED luminous module exhibited high luminance, thus validating the feasibility of creating smart luminescent attire with adequate brightness. Furthermore, there was no significant wearing stress observed, even after wearing it for more than 8 hours, and there was no impediment to various work-related movements. Through this research, we successfully demonstrated OLED based on smart luminescent safety clothing, which has the potential for wide-ranging applications across various industries and occupations, and is expected to play a crucial role in averting safety incidents.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.503-508
• /
• 1996

The data analysed consisted of records on lactation length (LL), total lactation yield (TLY), estimated 305-day yield (305 DY), days dry (DDRY), age at frist calving (AFC) and calving interval (CI) of 448 Friesian $\times$ Bunaji halfbreds that calved over a twenty-three year period (1967-1989) at the National Animal Production Research Institute, Shika, Nigeria. Least squares means of LL, TLY, 305DY, DDRY, AFC and CI were 250 days, 1,988 kg, 2,420 kg, 102 days, 35 months and 390 days, respectively. Parity, season and year of calving significantly affected LL, TLY (p < 0.01) and 350DY (p < 0.05), but not CI. DDRY was affected by season of calving only (p < 0.05). It was therefore concluded that the Shika Friesian $\times$ Bunaji crossbreeding programme was successful and beneficial in that the $F_1$ crosses calved at a younger age, produced twice as much milk, had longer lactations and slightly shorter calving intervals than the indigenous Bunaji.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.359-364
• /
• 2003

For safety evaluation of a rock-fill dim, it is often necessary to investigate spatial distribution of weak zones such as fracture. Both DC-resistivity survey and seismic(SASW) method are usually used for the purpose. Recently, Multichannel analysis of surface waves(MASW) method which makes up for the weak point of SASW method is developed and the site examination which is simple came to be possible comparatively. In order to obtain 2-D shear-wave velocity(Vs) profile along the dam axis that can be associated with dynamic properties of filled materials, MASW method was adapted. Then, DC-resistivity survey and drilling survey were performed to compare with each results. We confirmed that the MASW method and DC-resistivity survey show complementary result that corresspond with drilling result. Therefore, MASW method is an efficient method for dynamic characterization of dam-filling materials and also the combination of related methods such as DC-resistivity can lead to an effective safety evaluation of rock-fill dam.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.520-528
• /
• 1996

Four point bending tests of the brazed joint composed of sintered silicon nitride and 0.2% carbon steel with Cusil ABA filler which were fabricated at 86$0^{\circ}C$ were performed at temperatures, 25, 100, 200, 300, 400, 50$0^{\circ}C$ From the experiments, the maximum bending strength was measured at 30$0^{\circ}C$ From the 3D FE analysis of the residual stress of the brazed joint, it was revealed that the thermally induced residual stresses were minimized when the environmental temperature was 35$0^{\circ}C$ Considering the degradation of the filler material at high temperatures, it was calculated that the maximum bending strength of the brazed joint occured just below the temperature of the minimum thermal residual stress and the thermal residual stress was the dominative parameter of the brazed joint.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.1
• /
• pp.78-85
• /
• 1979

In order to obtain the basic data for designing optimum flat plate solar air heaters, which can be operated with relatively low temperature for drying farm products, 8 different treatment of solar air heaters were devised and tested for their heating performances and efficiencies. The results were analised and summarized as follows. 1. The primary factors, structure of air path (C), black coating materials (A) and bottom coating methods (B) showed very high significant effect of far above 1% level. With respect to the mutual multiplying effect of secondary factors, 1% level of significance was found with coating materials and methods (AB), and 5% level of significance was found with coating materials and air path structure (AC). 2. The heating performance of the air heaters with winding air path showed about twice those with straight air path. 3. The Korean black ink which is less expensive than dim oil paint showed 3-4% better heating efficiencies as the black coating material of flat plate solar air heaters. 4. The heating efficiencies of the solar air heaters whose bottoms were not black coated were 2-3% higher than those with black coated bottoms. 5. The highest heating efficiency of solar air heater among 8 different treatment was found in the plot of Korean black ink-bottom not coated-winding air path showing 29.0-34.5%

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1025-1030
• /
• 2001

As the pre-stage of making 3D stabilizing systems, at this paper designed 2D stabilizing system. This is composed of two axes stabilizing platform to preserve targeted direction while vehicle is moving. The system maintains stabilization by recovering error using the rate gyro with DSP TMS320F240 as controller, vibratory rate gyro (Tokimec co. TFG -l60D) as gyro scope, SD1015B52-1·SD1004C04-l/DM1015B DM1004C as direct drive driver/motor, PI control as control algorithm. This paper got a comparably good stabilization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.568-574
• /
• 2000

Phytofluene was subjected to ozonolysis in ice-cold dichloromethane. The ozonolysis products were fractionated with a silica column and the carbonyl fraction was analyzed by ODS-HPLC with a photodiode array detector. Phytofluene was solubilized in 5% tween 40, and then oxidized by incubating under dim yellow light at 37$^{\circ}C$, 24 hr with continuous shaking. Carbonyl compound and acidic compound were produced. In comparison with autoxidation and ozonolysis, each compound showed the same retention time and UV-vis spectra were identical to the reference cleavage products prepared by ozeonolysis of phytofluene. Absorption spectrum of acidic compound was similar to that of standard 4,5-didehydrogeranyl geranyl acid which is known to possess biological activity. Thus, eccentric cleavage of phytofluene was confirmed to occur in vitro under oxidation condition.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.1
• /
• pp.95-112
• /
• 2002

Two experiments were carried out to compare the suitability in visual tasks between cathode-ray tube (CRT) and thin film transistor-liquid crystal display (TFT-LCD). In the first experiment, the subjects were requested to detect pre-assigned target words or icons among distracters presented under time-invariant (static) image mode. The subjects' visual performance and fatigue were assessed while carrying out search tasks with dim and bright ambient light conditions. Significant interaction effects were found among displays, task types, and ambient light conditions. Due to visual fatigue, the subjects' accommodative power decreased in the end of task and the degradation was more significant for the CRT users and under bright ambient light. IN the second experiment, the subjects performed information processing task with time-varying road signs at a driving simulator to assess interaction effects between display types and changing speed of dynamic image. The perception time using TFT-TCD was shorter under slow image change while that of CRT was shorter rapid image change. Findings from this study suggest that, to improve visual task performance, users should carefully select their visual display type depending on the task to be performed.