• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.143-147
• /
• 1991

${\alpha}-amylase$ was immobilized on the surface of polyethylene glycol(M.W. 2000) grafted polyurethane film using diisocyanate in an attemp to develop enzyme immobilized polymeric materials. The surface morphology of the modified polyurethane film was examined by SEM. Effects of pH and temperature on the activity of the immobilized ${\alpha}-amylase$ were investigated. The optimal pH range of the activity was $7.0{\sim}7.5.$ The immobilized ${\alpha}-amylase$ demonstrated high thermal stability and maintained consistent activity during long-term storage.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.54-59
• /
• 2002

ABA triblock copolymers of L-lactide and trimethylene carbonate with several different compositions were prepared by sequential ring-opening polymerization in the presence of diethylene glycol. Also chain-extension reactions of the resulting copolymers were carried out using hexamethylene diisocyanate to produce relatively high molecular weight polymers, which could be cast into elastomeric tough films. The polymers with certain L-lactide contents were partially crystalline, exhibiting two-phase morphology. The polymer films showed reversible elastic behavior under tensile tension, providing a novel thermoplastic elastomer possessing desirable properties such as biodegradability and good mechanical properties.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.19-22
• /
• 1998

polycaprolactone diol(PCL), 4,4'-diphenylmethane diisocyanate(MDI) 및 1,4 butane diol(BD)로부터 segment형 폴리우레탄을 합성하였으며, 이들의 열변형 회복 특성을 조사한 결과 이들 재료들은 전형적인 형상기억 효과를 발휘함을 알 수 있었다. 형상회복온도는 연질성분의 함량 증가와 더불어 증가하였으며, 연질성분의 함량조절로 40-8$0^{\circ}C$의 넓은 범위에서 임의로 조절할 수 있었다.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.42-47
• /
• 2001

The hardening system of polyurethanes has usually caused by air pollution. bad working condition and fire hazard according to using orgarnic solvents. Therefore there have been researched on emulsion, water soluble and colloid-dispersion based water soluble instead of using organic solvents recently. This study synthesized polyurethane dispersing particle by means of mixing precursor and neutralized emulsion method. In the first step, polyurethane was preparated from isophorone diisocyanate and poly (ethylene-adipate) glycol, and got precursor by introducing dimethyl propionic acid as a hydrophilic group. Synthesized polyurethane was bonded to the surface of fiber and crosslinked as a anti-static agent, and then looked for the change of color and softening property.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.292-298
• /
• 1999

Lactide oligomer with number averagae molecular weight of 460 was synthesized and reacted with poly(oxyteramethylene)glycol(PTMG, Mn = 650) to obtain oligolactide oligomer-terminated PTMG. Polyurethanes were synthesized from the oligolactide-terminated PTMG, 4,4'-diphenylmethane diisocyanate, and 1,4-butanediol. The mechanical and thermal properties of the polyurethanes and PTMG based polyurethane as control were measured by means of DSC and tensile tester. Degradation behavior of these polyurethanes put into a compost was evaluated by variation of mechanical properties, surface state, and weight loss. Modulus and weight significantly decreased with increasing time. The surface of the oligolactide polyurethane put into the compost during 6 weeks had a number of voids. On the other hand, These properties of the PTMG based polyurethane as control did not change. These results suggest that the novel polyurethanes incorporated oligolactide easily degrade under biodegradable condition.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.81-85
• /
• 2017

In order to improve the water resistance, we synthesized waterborne polyurethane by using polyester polyol, poly(propylene carbonate) (PPC), 4,4'-dicyclohexylmethane diisocyanate ($H_{12}MDI$), and dimethylolpropionic acid (DMPA). The properties of the synthesized waterborne polyurethane using poly(propylene carbonate) (WPUP) were evaluated by FT-IR, $^1H-NMR$, GPC, DSC, TGA, and UTM. The mechanical properties increased while the adhesion properties decreased with the increase in the amount of PPC. The highest water resistance was shown when the ratio of polyester polyol to PPC was 9:1.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.76-83
• /
• 2000

This research is about wastewater containing non-biodegradable TDI(Toluene Diisocyanate) that is treated by the activated carbon adsorption method. In the case of the Fenton oxidation process being applied to the existing process, optimal pH, reaction time, chemical dosing amount, removal rate, and cost were investigated. A pilot plant test was applied after finding optimal conditions with lab experiments. The optimal conditions were pH 3~5(COD removal rate 84~88%) and reaction time 30min~1hr. In higher $H_2O_2$ dosing amount, COD removal rate was a little higher. But there was little difference in the removal rate according to $FeSO_4{\cdot}7H_2O$ dosing amount. Treatment cost was economical in the case of the Fenton oxidation process being operated earlier than activated carbon adsorption system. But chemical dosing point, chemical mixing effect, chemical dosing amount, removal rate, and the cost of facility and others must be considered in practical process.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.275-282
• /
• 2003

Aqueous polyurethane dispersion was synthesized using phosphorus compound which received significant attention for the replacement of halogenated flame retardants. In this study, polyols which have phosphorus moity in their structural unit were synthesized by two-step polycondensation reaction using dimethyl phenylphosphonate, ethylene glycols. adipic acid, and 1,4-butanediol. In the next step, polyurethane dispersion was prepared using these polyols, isophorone diisocyanate with dimethyl propionic acid. The particle size of polyurethane latex was reduced from 347 nm to 240 nm with increasing DMPA content. It was observed that the LOI values of prepared coatings increased from 27% to 35% with increasing phosphorus content.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.49-55
• /
• 2020

In this study, isophorone diisocyanate (IPDI) and dimethylolbutanoic acid (DMBA) were used on the basis of poly caprolactone diol (3M, 3.5M, 4M, 4.5M) for the synthesis of water-based polyurethanes for coating on skin layers of leather. Tensile strength, elongation, and adhesive strength of the prepared samples were measured. As a result of measuring the tensile strength, the tensile strength was found to be 4.09 kgf / ㎟ when 3 moles were applied, and 1.071 kgf / ㎟ when 4.5 moles were applied. Elongation was 366 % when 3 moles of PCL were applied, and 709 % at 4.5 moles. Adhesive strength was 2.887 kgf / cm when 3 moles of PCL was applied and 0.998 kgf / cm when 4.5 moles were applied.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.307-314
• /
• 2004

합성화학물질들이 환경으로의 유입은 인체에는 물론 환경생태계에 많은 영향을 미치므로 이들의 유해성 검증은 매우 중요한 일이라 할 수 있다. 실제 산업체에서 사용되는 수많은 화학물질들의 유전적 손상 유발유무는 유해성검증에서 무엇보다 중요한 일이라 할 수 있다. 이에 산업체 공정과정에서 널리 사용되는 것으로 알려진 11종의 합성화학물질에 대해 마우스의 골수 세포를 이용한 in vivo소핵시험을 수행하여, 소핵형성 유발유무를 관찰하였다. 양성대조군으로 사용된 mitomycin C는 음성대조군과 비교시 유의하게 소핵을 유발하는 반면, 비교적 마우스에서 높은 50%치사량을 보이는 thiourea, 2,4-dichlorophenol 및 2,4-toluene diisocyanate 등의 합성물질들을 비롯한 나머지 8종의 물질들은 본 실험결과 통계적으로 유의하게 소핵을 유발하지 않는 것을 관찰 할 수 있었다.