• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2000

Objectives : This study aimed to estimate the completeness of cancer registration with Capture-recapture method. Methods : The study was conducted in the population based cancer registry of Kwangju, Korea, for which there are three main sources of notification: reports by Korean Central Cancer Registry, reports by pathology data, and the others reports by radiology data, death certificates, etc. The defined cases in three sources were matched by 13 digits Resident Register Number. To derive an estimates, log-linear models were applicated. Results : Overall completeness was estimated to be around 93%. There was some variation with age(consistently high levels below age group 60-74 years, a minimum of 88.6% above 75 years). Among the most common cancer sites, estimates of completeness were highest for thyroid cancer(97.1%), while lower estimates of completeness were derived for stomach cancer(92.3%), liver cancer(92.6%). Conclusions : Careful application of Capture-recapture method may provide an alternative to traditional approaches for estimating the completeness of cancer registration in Kwangju city.

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.397-403
• /
• 2012

Background Nonabsorbable sutures are favorable for repairing flexor tendons. However, absorbable sutures have performed favorably in an animal model. Methods Two-strand sutures using the interlocking modified Kessler method with polydioxanone absorbable sutures 4-0 were used to repair completely ruptured flexor tendons in 55 fingers from 41 consecutive patients. The medical records of average 42 follow up weeks were analyzed retrospectively. The data analyzed using the chi-squared test, and Fisher's exact test was used for postoperative complications. The results were compared with those of other studies. Results Among the index, middle, ring, and little fingers were injured in 9, 17, 16, and 13 fingers, respectively. The injury levels varied from zone 1 to 5. Of the 55 digits in our study, there were 26 (47%) isolated flexor digitorum profundus (FDP) injuries and 29 (53%) combined FDP and with flexor digitorum superficialis injuries. Pulley repair was also conducted. Concomitant injuries of blood vessels and nerves were found in 17 patients (23 fingers); nerve injuries occurred in 5 patients (10 fingers). Two patients had ruptures (3.6%), and one patient had two adhesions (3.6%). Using the original Strickland criteria, all the patients were assessed to be excellent or good. Also, fibrosis and long-term foreign body tissue reactions such as stitch granuloma were less likely occurred in our study. Compared to the Cullen's report that used nonabsorbable sutures, there was no significant difference in the rupture or adhesion rates. Conclusions Therefore, this study suggests that appropriate absorbable core sutures can be used safely for flexor tendon repairs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4491-4509
• /
• 2017

The present paper proposes a novel dynamic system for hand gesture recognition. The approach involved is comprised of three main steps: detection, tracking and recognition. First, the gesture contour captured by a 2D-camera is detected by combining the three-frame difference method and skin-color elliptic boundary model. Then, the trajectory of the hand gesture is extracted via a gesture-tracking algorithm based on an occlusion-direction oriented linear extrapolation predictor, where the gesture coordinate in next frame is predicted by the judgment of current occlusion direction. Finally, to overcome the interference of insignificant trajectory segments, the longest common subsequence (LCS) is employed with the aid of velocity information. Besides, to tackle the subgesture problem, i.e., some gestures may also be a part of others, the most probable gesture category is identified through comparison of the relative LCS length of each gesture, i.e., the proportion between the LCS length and the total length of each template, rather than the length of LCS for each gesture. The gesture dataset for system performance test contains digits ranged from 0 to 9, and experimental results demonstrate the robustness and effectiveness of the proposed approach.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.35-42
• /
• 1994

This study aims to develop a hydrological information management system to manage the hydrological data of Han river integratedly. Various data related to hydrology such as water level, dams, the positions of the hydrological structures for Han river were collected and inputed to build the hydrological information management system. The Database Management System(DBMS) of Korea Water Resources Cooperation which is operated in the form of digits and characters was linked to the Geo-Spatial Information System to join positional information and digital information and to analyze the hydrological data using graphical techniques. Through this study, the positional errors which occurred when digital or characteristic informations were only used, were detected. And the hydrological information management system was presented to estimate the reliability of data related to water level among the hydrological information and to show the basis of output used to correct the data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.14-20
• /
• 2003

This paper presents a text extraction method of camera based document image. It is more difficult to recognize camera based document image in comparison with scanner based image because of segmentation problem due to variable lighting condition and versatile fonts. Both document binarization and character extraction are important processes to recognize camera based document image. After converting color image into grey level image, gray level normalization is used to extract character region independent of lighting condition and background image. Local adaptive binarization method is then used to extract character from the background after the removal of noise. In this character extraction step, the information of the horizontal and vertical projection and the connected components is used to extract character line, word region and character region. To evaluate the proposed method, we have experimented with documents mixed Hangul, English, symbols and digits of the ETRI database. An encouraging binarization and character extraction results have been obtained.

• Journal of KIISE:Software and Applications
• /
• v.28 no.9
• /
• pp.603-611
• /
• 2001

This paper proposes a novel fast layer-by-layer algorithm that has better generalization capability. In the proposed algorithm, the weights of the hidden layer are updated by the target vector of the hidden layer obtained by least squares method. The proposed algorithm improves the learning speed that can occur due to the small magnitude of the gradient vector in the hidden layer. This algorithm was tested in a handwritten digits recognition problem. The learning speed of the proposed algorithm was faster than those of error back propagation algorithm and modified error function algorithm, and similar to those of Ooyen's method and layer-by-layer algorithm. Moreover, the simulation results showed that the proposed algorithm had the best generalization capability among them regardless of the number of hidden nodes. The proposed algorithm has the advantages of the learning speed of layer-by-layer algorithm and the generalization capability of error back propagation algorithm and modified error function algorithm.

• Journal of KIISE:Software and Applications
• /
• v.28 no.12
• /
• pp.875-884
• /
• 2001

Although the self organizing map (SOM) is widely utilized in such fields of data visualization and topology preserving mapping, since it should have the topology fixed before trained, it has some shortcomings that it is difficult to apply it to practical problems, and classification capability is quite low despite better clustering performance. To overcome these points this paper proposes the dynamic topology preserving self-organizing map(DTSOM) that dynamically splits the output nodes on the map and trains them, and attempts to improve the classification capability by combining multiple DTSOMs K-Winner method has been applied to combine DTSOMs which produces K outputs with winner node selection method. This produces even better performance than the conventional combining methods such as majority voting weighting, BKS Bayesian, Borda, Condorect and reliability sum. DTSOM remedies the shortcoming of determining the topology in advance, and the classification rate increases significantly by combing multiple maps trained with different features. Experimental results with handwritten digit recognition indicate that the proposed method works out to problems of conventional SOM effectively so to improve the classification rate to 98.1%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1181-1188
• /
• 2017

The unit and fundamental units of number fields are important to number field sieves testing primality of more than 400 digits integers and number field seive factoring the number in RSA cryptosystem, and multiplication of ideals and counting class number of the number field in imaginary quadratic cryptosystem. To minimize the time and space in H/W implementation of cryptosystems using fundamental units, in this paper, we introduce the Dirichlet's unit Theorem and propose our process of generating the fundamental units of the number field. And then we present the algorithm generating our fundamental units of the number field to minimize the time and space in H/W implementation and implementation results using the algorithm over the number field.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.151-163
• /
• 1998

The purpose of this study is to find options which reduce the job stress and to enhance morale through a variable analysis, and also apply this data in the legal and administration fields. The data for the research was obtained from 217 dental hygienists working in the dental clinics, dental hospitals and university's dental hospitals' in Seoul. The tool used by this study was a Questionnaire measuring on-the-job stress of dental hygienists, was a modified and revised. The Questionnaire version used to measure bank's job stress and used to suggest options by Dae-ha Yoon(1991). Classification of items for measuring job stress was based on Theoretical Study on Job Stress by Dae-hyon Song(1986). The scale used in study was the two points (yes or no in the job stress) scale measuring for variables. The period of data collection was 30 days from December 4, 1995 to January 5, 1996. The methods of data collection were self-writing, direct visit, and postal Questionnaire answering, 224 copies of Questionnaire data were collected, but only 217 copies were used. 7 copies could not be analyzed, were not used for this study. The data analysis was conducted by SPSS after coding the collected raw data. The general characteristics was obtained from real digits and percentages. In order to analyze the difference of sub-variables against the job stress based on general characteristics. Mean, Standard Deviation, and F test (ANDVA) were conducted. The following were the results of job stress variables: 1. Meaningful variable affecting the working organization, is compensation system(p〈0.03). 2. Meaningful variable affecting the working period, is work overload(p〈0.02). 3. Meaningful variable affecting average patients per day, is the career management and payment(p〈0.04, p〈0.01). 4. Meaningful variable affecting number of staff, is the comrade relationship, role conflict among patients, work overload, and job overload(p〈0.000, p〈0.05, p〈0.04, p〈0.01). The comrade relationship is most affected to the number of staffs aides. 5. Meaningful variables affecting job diversion, are the desire and value, the non-role play, and the environment(p〈0.003, p〈0.02, p〈0.005).

• Industrial Engineering and Management Systems
• /
• v.15 no.4
• /
• pp.396-402
• /
• 2016

In this study, hydraulic analysis of water-supply networks in Marivan was performed by modeling. WATERGEMS was used for modeling and it was calibrated using existing rules and regulations. The purpose of this research is modeling urban water network and its analysis based on hydraulic criteria and meeting pressure conditions at the nodes and complying the economic speed. To achieve this goal, first the pipelines of city streets was designed in AutoCAD on a map of the city. It should be mentioned that it was tried to prevent from creating additional loops in the network and the optimal network was designed by a combination of annular and branch loops. In the next step, the pipes were called in WATERGEMS and then we continue the operation by the allocation of elevation digits to the pipes. Since the topography of this city is very specific and unique, the number of pressure zones was increased. Three zones created only covers about 20% of the population in the city. In this dissertation, the design was performed on the city's main zone with the largest density in the Figures 1,320-1,340. In the next step, the network triangulation was conducted. Finally, the Debiw as allocated based on the triangulation conducted and considering the density of the city for year of horizon. Ultimately, the network of Marivan was designed and calibrated according to hydraulic criteria and pressure zoning. The output of this model can be used in water-supply projects, improvement and reform of the existing net-work in the city, and various other studies. Numerous and various graphs obtained in different parts of a network modelled can be used in the analysis of critical situation, leakage.