• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.308-314
• /
• 2017

A particular optical receiver has its own optical receiver modes (ORMs) determined by its optical and electrical filters. Superposing the ORM waveforms at the transmitter, we can generate a new type of optical signals, called ORM signals. After optical detection, they produce pre-specified voltage waveforms accurately, which is advantageous for digital signal processing. Assuming a Gaussian optical receiver, where the optical and electrical filters are Gaussian, we illustrate various phase-shift keying ORM signals using two ORMs by changing their relative phase. We also illustrate multi-level ORM signal patterns using two or more ORMs.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.259-262
• /
• 2003

In this paper, we designed and implemented digital wireless audio system with embedded RTOS using Bluetooth. Transmitter is consisted of a Settopbox, FIFO for interface block, Microprocessor(ARM7TDMI), UART driver and Bluetooth module. Receiver is consisted of a Microprocessor, AC-3 decoder, Bluetooth module and a Speaker with Amp. We programed Bluetooth protocal stack of HCI, L2CAP, and RFCOMM, so that Bluetooth module interacts with CPU.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.64-72
• /
• 2011

In a Single Frequency Network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interferences induced by the multiple transmitters and/or repeaters using same frequency are unavoidable. To ease the interference handing in the SFN for ATSC DTV system, transmitter identification (TxID) signal is recommended in the ATSC terrestrial DTV system. The TxID signal is embedded in the ATSC DTV signal and transmitted from each transmitter and repeater within the SFN and in ATSC recommended practice (RP) A/111, Kasami sequence is recommended as the TxID signal. In this paper, we propose an additional data transmission scheme using the TxID signal. In the proposed scheme, the Kasami sequence not only acts as the conventional TxID of the SFN for ATSC terrestrial DTV system but also carriers the additional data bits on its polarity and the code phase.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.266-277
• /
• 2007

Recently, Transmitter Identification(TxID) technology has been issued as a technology of ATSC DTV. ATSC DTV networks are comprised of a plurality of transmitters, broadcasting the same signal sing one frequency network(SFN) connected to EDOCR. In this single frequency network, TxID technology has been recognized as a technology in the ATSC DTV system since it enables the broadcast authorities and classify multiple transmitters. However, conventional TxID uses extremely long spreading sequence to identifying transmitters, so it increases H/W complexity and registers. Thus, to solve those hardware problems, we propose an efficient signal processing technology using decimation algorithm. Furthermore, we certified the availability of the proposed algorithm via various simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.123-127
• /
• 2009

In this paper, we suggested new additional data transmission technology for T-DMB system using MOK-SS(Mary Orthogonal Keying- Spread Spectrum)mapping method. We applied revised watermarking method of TxID(Transmitter Identification) technology mainly had been used for conventional ATSC-DTV(Advanced Television Systems Committee - Digital TV). And proposed schemes enhanced additional data rate using MOK-SS mapping method. We certified availability of our proposed technology by using various simulation and error rate performance analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.176-180
• /
• 2004

The ST-segment that the beginning part of T wave is the important diagnostic parameter to finding myocardial ischemia. Abnormal ST appears in two types. One is the level change, and the other is the pattern change. In this paper, we describe the monitoring of abnormal ST using PC based system. Hardware of this system consists of transmitter, receiver and PC. The function of transmitter is measuring ECG in three channels which are selected manually and transmitting the data to receiver by digital radio way. Connection with receiver and PC is by RS232C, and the data received on the PC is analyzed automatically by ECG analysis algorithm and saved to file. In the algorithm part for detecting abnormal ST, ST-segments are approximated by a polynomial. This method can detect all of the deviation and pattern change of ST-segment regardless the change in the heart rate or sampling rate. To gain algorithm reliability, the method rejects distorted polynomial approximation by calculation the difference between the approximated ST-segment and original ST-segment. In pre-signal processing, the wavelet transformation separates high frequency bands including QRS complex from the original ECG. Consequently, the process improves the performance of detecting each feature points.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.753-758
• /
• 2002

In this paper, low voltage 3V CMOS programmable gain amplifier(PGA) for using in the transmitter and receiver of ADSL analog front-end is designed. The designed receive PGA is connected with 1.1MHz continuous lowpass fillet and controls the gain from 0dB to 30dB. And also the transmitter PGA is connected with 138KHz lowpass filter and controls the gain from -15dB to 0dB. The gain of All PGAs can be programmed by digital logic circuits and main controller. The designed PGAs are verified using HSPICE simulation with $0.35\mu{m}$ CMOS parameter.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3133-3138
• /
• 1997

The Digital Broadcasting Satallite System consists of the Transmitter station, the Resource and Subscriber Management System, and the Receiver Test Unit. The RSMS consists or several modules such as Resource Main Module, Resource User Interface Module, Transmitter Station Interface Module, Receiver Test Unit Interface Module, Subscriber sales Outlets Module and Monitor & Control Module. In this paper we suppose the new RRMC Algorithms that is to manage efficiently the Resource and subscriber information in the Direct Broadcasting Satellite system based on client-sever features and demonstrates the implementation method of monitoring and control the system in real time. Also we explain the communication procedure between resource and subscriber managment and other equipment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.178-186
• /
• 2018

A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1813-1819
• /
• 2011

In this research, the location positioning system supposed is concerned with range recognition technology using phase and magnitude of radio wave and adding technology of image histogram by vision. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450Khz of analog signal. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to improve the measurement error using average processing and amplitude properties.