• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.145-152
• /
• 1997

A coupling of two-dimensional model and GIS technique is applied to simulate sediment transport analysis. Accurate transformations are performed for the data which have various reduced scales. Basic maps are discretized the mesh of true scale for the finite element model by using the digital map and the Traverse Mercator coordinate. Under $200m^3/s$ flow rate condition, velocity vectors, depth contours, velocity contours and deposition contours are Presented for the 5km reach of midstream of Keum River from confluence of Ji-chun to Baekche Bridge. The simulation results of the study agree well with those of one-dimensional varied flow analysis and observed data. The flow and deposition pattern revealed a meandering characteristics of the river qualitatively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4042-4059
• /
• 2020

The development of new multimedia techniques such as 3D printing is increasingly attracting the public's attention towards 3D objects. An optimized robust and imperceptible watermarking method based on Ant Colony Optimization (ACO) and Weber Law is proposed for 3D polygonal models. The proposed approach partitions the host model into smaller sub meshes and generates a secret watermark from the sub meshes using Weber Law. ACO based optimized strength factor is identified for embedding the watermark. The secret watermark is embedded and extracted on the wavelet domain. The proposed scheme is robust against geometric and photometric attacks that overcomes the synchronization problem and authenticates the secret watermark from the distorted models. The primary characteristic of the proposed system is the flexibility achieved in data embedding capacity due to the optimized strength factor. Extensive simulation results shows enhanced performance of the recommended framework and robustness towards the most common attacks like geometric transformations, noise, cropping, mesh smoothening, and the combination of such attacks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.205-211
• /
• 1999

In this study, we utilized 2D conformal transformation method to give coordinatesbased on GPS surveying data to NAHMIS (National Highway Management Information System) drawings which are lack of coordinates. To determine the best method which is comparable with GPS digital map, we compared a transformation result obtained by unique parameters applied to the whole region of about 20 km of the NAHMIS drawings and the similar result of the tile based transformations. As the result of map joining, the error was within 2 m for both cases. In this way, NAHMIS can be used for a systematic management of construction drawings. Moreover, NAHMIS can contribute the management of highway and the data exchange between other systems by a unification of coordinate system.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.432-441
• /
• 2017

Grid voltage feedforward is extensively used for controlling grid-connected converters. However, the conventional voltage feedforward control reduces the stability margins of the converter connected to a high-impedance grid. The effect mechanism of voltage feedforward on the grid-connected converter control under high-inductive conditions of the grid impedance is clearly explained in this study using the equivalent transformations of control block diagrams. Results show that the delay produced by the digital control is the root cause of this effect. An improved voltage feedforward strategy, in which a bandpass filter (BPF) is introduced into the feedforward path, is proposed to strengthen the converter's robust stability against grid impedance variations. The selection method of the BPF's bandwidth is also provided considering the tradeoff between the response speed to the grid voltage sag and the system's robust stability. The converter can work stably over a wide range of the grid impedance through the proposed approach. Simulation and experimental results fully verify the effectiveness of the BPF-based voltage feedforward strategy.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

This study explores experiences of male family care worker who are caring for their family members with chronic health conditions at home. Qualitative methodologies were used; semi-structured in-depth interviews with seven participants. Data were analysed using thematic analysis. Results indicated that men are playing greater roles in the provision of care for family members. Findings are presented as three themes: adaptation of role transformations, development for new relationships, and learning to cope with the unexpected. The results suggest that male family care workers experience changes in the ways that they adapt their traditional roles to the new roles they assume as caregivers. Implications for social workers and other care providers are discussed.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.157-166
• /
• 2016

In this paper, a new sag and peak voltage detector is proposed for a single-phase inverter using delta square operation. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on d-q transformations using an all-pass filter (APF). The d-q transformation is typically used in the three-phase coordinate system. The APF generates a virtual q-axis voltage component with a 90° phase delay, but this virtual phase cannot reflect a sudden change in the grid voltage at the instant the voltage sag occurs. As a result, the peak value is drastically distorted, and it settles down slowly. A modified APF generates the virtual q-axis voltage component from the difference between the current and the previous values of the d-axis voltage component in the stationary reference frame. However, the modified APF cannot detect the voltage sag and peak value when the sag occurs around the zero crossing points such as 0° and 180°, because the difference voltage is not sufficient to detect the voltage sag. The proposed algorithm detects the sag voltage through all regions including the zero crossing voltage. Moreover, the exact voltage drop can be acquired by calculating the q-axis component that is proportional to the d-axis component. To verify the feasibility of the proposed system, the conventional and proposed methods are compared using simulations and experimental results.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.6
• /
• pp.32-40
• /
• 2000

In this paper, we proposed a wavelet-based digital watermarking algorithm using human visual system and subband-adaptive threshold. After the original image is transformed by discrete wavelet transform, the perceptually significant coefficients of the each subband excluding the lowest level subbands are utilized to embed the watermark. To select perceptually significant coefficients for each subband, we use subband-adaptive threshold. For the selected coefficients in the high frequency subbands, the watermark is embedded using HVS. For those of the baseband, the watermark is embedded by conventional embedding method. We tested the performance of the proposed algorithm compared with conventional watermarking algorithm by computer simulation. The experimental results show that the proposed watermarking algorithm is less visible to human eyes and more robust to image compressions, image processings, and geometric transformations than the conventional algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.3
• /
• pp.142-149
• /
• 2012

Various image transformations can be used to compress images, to reduce noises in images and to extract useful features. Watermarking techniques using DCT and DWT have been a lot of research interest in the spread of multimedia contents. In this paper, Gabor cosine and sine transform considered as human visual filter is applied to embedding and extraction of watermarks for digital images. The proposed transform is used for watermarking with fifteen attacks. Randomly normal distributed noises are used as an embedded watermark. To measure the similarity between the embedded watermark and extracted one, a correlation value is computed and furthermore is compared with that of existing DCT method. Correlation values of extracted watermark are computed with randomly normal distributed noise sequences, and the sequence with the largest correlation value is declared as the embedded watermark. Frequency components are divided into various bands. Experimental results for low frequency and mid-frequency bands have shown that the proposed GCST provides a good watermarking algorithm and its performance is better than DCT.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.122-128
• /
• 2015

As multimedia information is spread over cyber networks, problems such as protection of legal rights and original proof of an information owner raise recently. Various image transformations of DCT, DFT and DWT have been used to embed a watermark as a token of ownership. Recently, SVD being used in the field of numerical analysis is additionally applied to the watermarking methods. A watermarking method is proposed in this paper using Gabor cosine and sine transform as well as SVD for embedding and extraction of watermarks for digital images. After delivering attacks such as noise addition, space transformation, filtering and compression on watermarked images, watermark extraction algorithm is performed using the proposed GCST-SVD method. Normalized correlation values are calculated to measure the similarity between embedded watermark and extracted one as the index of watermark performance. Also visual inspection for the extracted watermark images has been done. Watermark images are inserted into the lowest vertical ac frequency band. From the experimental results, the proposed watermarking method using the singular vectors of SVD shows large correlation values of 0.9 or more and visual features of an embedded watermark for various attacks.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.409-420
• /
• 2007

Since 1988, pine wilt disease has spread over rapidly in Korea. It is not easy to detect the damaged pine trees by pine wilt disease from conventional remote sensing skills. Thus, many possibilities were investigated to detect the damaged pines using various kinds of remote sensing data including high spatial resolution satellite image of 2000/2003 IKONOS and 2005 QuickBird, aerial photos, and digital airborne data, too. Time series of B&W aerial photos at the scale of 1:6,000 were used to validate the results. A local maximum filtering was adapted to determine whether the damaged pines could be detected or not at the tree level from high resolution satellite images, and to locate the damaged trees. Several enhancement methods such as NDVI and image transformations were examined to find out the optimal detection method. Considering the mean crown radius of pine trees, local maximum filter with 3 pixels in radius was adapted to detect the damaged trees on IKONOS image. CIR images of 50 cm resolution were taken by PKNU-3(REDLAKE MS4000) sensor. The simulated CIR images with resolutions of 1 m, 2 m, and 4 m were generated to test the possibility of tree detection both in a stereo and a single mode. In conclusion, in order to detect the pine tree damaged by pine wilt disease at a tree level from satellite image, a spatial resolution might be less than 1 m in a single mode and/or 1 m in a stereo mode.