• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.804-807
• /
• 2006

The SRI(Super Resolution Imager) with 800mm aperture primary mirror is the ground development model of the high resolution satellite camera. The SRI focal plane electronics including detector array generates the data for high-resolution images by converting incoming light into digital stream of pixel data. Since the focal plane including a detector is the basic building block of the camera system, the main system performances is directly determined by its performance. This paper measures the SRI focal plane electronics’ performance such as the dark signal, the dark signal noise, the linearity, the PRNU(Photo Response Non-Uniformity), the SNR(Signal to Noise Ratio) and the sensor saturation capability. In addition, this paper verifies the various functionalities of the SRI focal plane electronics. The electrical test equipment with the specialized software and the optical test equipments such as the integrating sphere, the rotation stage and the target are implemented and used to verify these functionalities and performances.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.631-634
• /
• 2006

Three main important sources for establishing GIS are the orthomap in scale 1:5 000 with Ground Sampling Distance of 0,5m; DEM/DTM data with height error of ${\pm}$1,0m and topographic map in scale 1: 10 000. The new era with Very High Resolution Satellite (VHRS) images as IKONOS, QuickBird, EROS, OrbView and other ones having Ground Sampling Distance (GSD) even lower than 1m has been in potential for producing orthomap in large scale 1:5 000, to update existing maps, to compile general-purpose or thematic maps and for GIS. The accuracy of orthomap generated from VHRS image affects strongly on GIS reliability. Nevertheless, orthomap accuracy taken from VHRS image is at first dependent on chosen sensor geometrical models. This paper presents, at fist, theoretical basic of the Rational Polynomial Coefficient (RPC) model installed in the commercial ImageStation Systems, realized for orthorectifying VHRS images. The RPC model of VHRS image is a replacement camera mode that represents the indirect relation between terrain and its image acquired on the flight orbit. At the end of this paper the practical accuracies of IKONOS and QuickBird image orthorectified by RPC model on Canadian PCI Geomatica System have been presented. They are important indication for practical application of producing digital orthomaps.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.417-420
• /
• 2006

In these days, mobile application dealing with information contents on mobile or handheld devices such as mobile communicator, PDA or WAP device face the most important industrial needs. The motivation of this study is the design and implementation of mobile application using high resolution satellite imagery, large-sized image data set. Although major advantages of mobile devices are portability and mobility to users, limited system resources such as small-sized memory, slow CPU, low power and small screen size are the main obstacles to developers who should handle a large volume of geo-based 3D model. Related to this, the previous works have been concentrated on GIS-based location awareness services on mobile; however, the mobile 3D terrain model, which aims at this study, with the source data of DEM (Digital Elevation Model) and high resolution satellite imagery is not considered yet, in the other mobile systems. The main functions of 3D graphic processing or pixel pipeline in this prototype are implemented with OpenGL|ES (Embedded System) standard API (Application Programming Interface) released by Khronos group. In the developing stage, experiments to investigate optimal operation environment and good performance are carried out: TIN-based vertex generation with regular elevation data, image tiling, and image-vertex texturing, text processing of Unicode type and ASCII type.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.228-233
• /
• 2007

지표면 온도(Land Surface Temperature, LST)는 지표와 대기간의 수증기 교환을 조절하는 중요한 기상변수중의 하나이다. 그 외에도 지표면 온도는 토양의 상태나 식생의 성장에도 밀접한 관계가 있어 임업과 농업에도 널리 활용되고 있다. 본 연구의 목적은 위성 지표면 자료를 이용하여 지상관측점의 열적 공간 대표성을 알아내는 것이다. 전국에총 76개의 관측소가 있으며 그중에서 선정된 6곳 의 관측소(서울，부산，대전，대구，광주，춘천)를 MODIS LST product와 비교를 하였다. 비교 방법은 위성 자료의 pixel size를 $3{\time}\;3$, $5{\time}\;5$, $7{\time}\;7$, $9{\time}\;9$, $11{\time}\;11$, $15{\time}\;15$, $19{\time}\;19$, $25{\time}\;25$로 변환하여 각 pixel size별 평균값을 계산하여 MODIS product와 비교하여 선형분석을 하였다. 분석의 요소로 Fraction Vegetation Cover(FVC)와 Digital Elevation Model(DEM)을 사용하였으며 분석 결과 FVC의 상관관계과 DEM보다 높은 상관성을 보여주었다. 선형분석으로 도출한 식으로 지표면 온도를 재산출한 뒤 지상관측값과의 RMSE를 산출하였다. 대표성 규명을 위한 RMSE는 일 최고 기온 산출 모델에 관한 연구를 참고하여 $^{\circ}C$로 결정하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.171-173
• /
• 2003

Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of PV system. This paper describes the design of the monitoring system for sensing the monitoring data and indirect controlling of the PV system. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-on card based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, free of the place restriction and unmanned system of the generation plants, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.28-28
• /
• 2008

Generally speaking, Rogowskii coil for magnetic flux change detection according to electric current is used for digital addition watt-hour meter, because it is not saturated at electromagnetic that not Current Transformer working by magnetic material but non-magnetic material. In this paper, we described sensitive quality an electric current coil sensor followed by the principal of Rogowskii coil on the low dielectric loss LTCC, change different line width, gap, line length at sensing parts and extinction parts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2518-2533
• /
• 2020

In wireless sensor networks, adversaries may physically capture sensor nodes on the fields, and use them to launch false positive attacks (FPAs). FPAs could be conducted by injecting forged or old sensing reports, which would represent non-existent events on the fields, with the goal of disorientating the base stations and/or reducing the limited energy resources of sensor nodes on the fields. Researchers have proposed various mitigation methods against FPAs, including the statistical en-route filtering scheme (SEF). Most of these methods are based on key pre-distribution schemes and can efficiently filter injected false reports out at relay nodes through the verification of in-transit reports using the pre-distributed keys. However, their filtering power may decrease as time goes by since adversaries would attempt to capture additional nodes as many as possible. In this paper, we propose an adaptive key distribution method that could maintain the security power of SEF in WSNs under such circumstances. The proposed method makes, if necessary, BS update or re-distribute keys, which are used to endorse and verify reports, with the consideration of the filtering power and energy efficiency. Our experimental results show that the proposed method is more effective, compared to SEF, against FPAs in terms of security level and energy saving.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.65-70
• /
• 1999

The study analyze Conifer and Hardwood area and their distribution to seek an efficient survey for Experimental Forest of Kangwon National University using Landsat-5 TM data. Through forest cover types, we try to study on the possibility to use Satellite Data. development of Satellite Interpretation Skill and Digital Mapping Method. As analysis tools we use IMAGINE 8.3 and ArcView 3.0 software. The result showed that Hardwood took approximately 73%, 2,224ha of the total 3,058ha and Conifer takes 27%, 832ha.

• Ocean Science Journal
• /
• v.41 no.2
• /
• pp.97-104
• /
• 2006

A useful radiance-converting method was developed to convert the Landsat-7 ETM+thermal-infrared (TIR) band's radiance ($L_{{\lambda},L7/ETM+}$) to that of Landsat-5 TM TIR ($L_{{\lambda},L5/TM+})$ as: $L_{{\lambda},L5/TM}=0.9699{\times}L_{{\lambda},L7/ETM+}+0.1074\;(R^2=1)$. In addition, based on the radiance-converting equation and the linear relation between digital number (DN) and at-satellite radiance, a DN-converting equation can be established to convert DN value of the TIR band between Landsat-5 and Landsat-7. Via this method, it is easy to integrate Landsat-5 and Landsat-7 TIR data to retrieve the sea surface temperature (SST) in coastal waters on the basis of local empirical algorithms in which the radiance or DN of Lansat-5 and 7 TIR band is usually the only input independent variable. The method was employed in a local empirical algorithm in Daya Bay, China, to detect the thermal pollution of cooling water discharge from the Daya Bay nuclear power station (DNPS). This work demonstrates that radiance conversion is an effective approach to integration of Landsat-5 and Landsat-7 data in the process of a SST retrieval which is based on local empirical algorithms.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.297-300
• /
• 2008

High-resolution mesoscale meteorological modeling requires more accurate and higher resolution digital elevation model (DEM) data. Shuttle Radar Topographic Mission (SRTM) has created 90 m DEM for entire globe and that is freely available for meteorological modeling and environmental applications. In this research, the effects of the topographic interpolation methods on high-resolution wind field simulation in the coastal regions were quantitatively analyzed using Weather Research and Forecasting (WRF) model with SRTM data. Sensitivity experiments with three different interpolation schemes (four-point bilinear, sixteen-point overlapping parabolic and nearest neighbor interpolation methods) were preformed using SRTM. In WRF modeling with sixteen-point overlapping parabolic interpolation, the coastal line and some small islands show more clearly than other cases. The maximum height of inland is around 140 meters higher, while the minimum of sea height is about 80 meter lower. As it concerns the results of each scheme it seems that the sixteen-point overlapping parabolic scheme indicates the well agreement with observed surface wind data. Consequently, topographic changes due to interpolation methods can lead to the significant influence on mesoscale wind field simulation of WRF modeling.