• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.92-99
• /
• 2014

The paper is related to smart maximum power system based on program logic. Especially, this system compares the total demand power with the target power by using the signal from the digital kilo watt meter. Based on the power information by the maximum power control equipment the consumed future power is anticipated. In addition, through consumed future power the controllable target power is set, and it applies on the maximum power control equipment. User or manager would control the load efficiently through the simple programming which could control load based on the control sequence and relay. To begin with the conventional maximum power control algorithm is surveyed, and the smart maximum power control system based on program logic is used, and the new algorithm from full load to proportion shut down is proposed by using PLC program. the validity of the proposed control scheme is investigated by both simulation results.

• 한국통신학회논문지
• /
• 제39C권7호
• /
• pp.566-572
• /
• 2014

본 논문에서는 다중 선박으로 구성된 해양 네트워크에서 선박 간 통신 거리를 확장하면서 전송률을 향상시키는 양방향 다중-홉 릴레이 기법을 제안한다. 제안 기법은 두 단계 디지털 네트워크 부호화를 기반으로 각 선박의 데이터 전송 순서와 네트워크 부호화 순서를 알맞게 설계하여 데이터 교환에 필요한 시간 슬롯 수를 줄인다. 모의실험 결과 제안하는 양방향 다중 홉 릴레이 기법은 기존 기법의 전송률을 약 5/3배 향상시킴을 볼 수 있다.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1360-1365
• /
• 2010

In this paper, we propose a distance relaying algorithm using a Discrete Fourier Transform (DFT)-based modified phasor estimation method to eliminate the adverse influence of exponentially decaying DC offsets. Most distance relays are based on estimating phasors of the voltage and current signals. A DFT is generally used to calculate the phasor of the fundamental frequency component in digital protective relays. However, the output of the DFT contains an error due to exponentially decaying DC offsets. For this reason, distance relays have a tendency to over-reach or under-reach in the presence of DC offset components in a fault current. Therefore, the decaying DC components should be taken into consideration when calculating the phasor of the fundamental frequency component of a relaying signal. The error due to DC offsets in a DFT is calculated and eliminated using the outputs of an even-sample-set DFT and an odd-sample-set DFT, so that the phasor of the fundamental component can be accurately estimated. The performance of the proposed algorithm is evaluated for a-phase to ground faults on a 345 kV, 50 km, simple overhead transmission line. The Electromagnetic Transient Program (EMTP) is used to generate fault signals. The evaluation results indicate that adopting the proposed algorithm in distance relays can effectively suppress the adverse influence of DC offsets.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.12-17
• /
• 2013

Fault currents are expressed as a combination of harmonic components and exponentially decaying DC offset components, during the occurrence of fault in power system. The DC offset components are included, when the voltage phase angle of fault inception is closer to $0^{\circ}$ or $180^{\circ}$. The digital protection relay should be detected quickly and accurately during the faults, despite of the distortions of relaying signal by these components. It is very important to implement the robust protection algorithm, that is not affected by DC offset and harmonic components, because most relaying algorithms extract the fundamental frequency component from distorted relaying signal. So, In order to high performance in relaying, advanced DC offset removal filter is required. In this paper, a new DC offset removal filter, which is no need to preset a time constant of power system and accurately estimate the DC offset components with one cycle of data, is proposed, and compared with the other filter. In order to verify performance of the filter, we used collecting the current signals after synchronous machine modeling by ATPDraw5.7p4 software. The results of simulation, the proposed DC offset removal filter do not need any prior information, the phase delay and gain error were not occurred.

• 한국통신학회논문지
• /
• 제32권5A호
• /
• pp.475-483
• /
• 2007

OFDMA 상향 시스템은 DVB-RCT를 위해 채택되었는데, OFDM과 동일하게 다중 경로 페이딩 영향에 강하고 성능 열화 없이 수신 가능하다는 이점을 갖는다. 이 시스템의 QoS를 향상시키기 위해 기존의 MIMO시스템이 많이 연구되었으나 다중송수신 안테나를 이용하는 이들 STC, MRC 등은 다중안테나를 사용하는 데에 따른 하드웨어 복잡도 증가, 고비용, 공간상의 제약 등 여러 가지 문제점을 안고 있다. 따라서 이들을 극복하면서 QoS도 만족시킬 수 있는 새로운 기법이 필요하다. 따라서 이 논문에서는 단일 안테나를 사용하는 OFDMA 기반의 DVB-RCT 시스템을 위하여 기존의 다중 송수신 기법들의 단점을 극복하고 현존 시스템을 이용할 수 있는 협동 전송 기법을 제안한다. OFDMA 상향 시스템 기반의 단일 안테나 DVB-RCT 시스템에 제안된 협동 전송 기법을 적용함으로써, 위에서 언급한 기존 기법들의 단점들을 극복하고 MIMO 시스템과 같이 성능을 향상 시킬 수 있다.

• 항공우주기술
• /
• 제2권1호
• /
• pp.98-107
• /
• 2003

멀리 떨어진 장소의 시계를 동기시키기 위해 사용하는 일반적인 방법에 대한 조사 연구를 수행하였다. 현재까지 사용되었거나 사용 중인 시각동기 방법은 여러 가지가 있는데 크게 세가지 범주로 분류할 수 있다. 첫 번째는 지상망에 의한 방법, 두 번째는 GPS/NAVSTAR 위성망에 의한 방법, 그리고 세 번째, 정지위성에 의한 시각동기 방법이다. 특히 GPS/NAVSTAR 위성망은 무선 디지털 통신용 기지국의 시각동기에 사용되고 있으며, 이것의 백업 시스템으로써 정지위성에 의한 시각동기 방법이 연구되고 있다. 본 논문에서는 세 가지로 분류된 각각의 시각동기 방법에 대해 설명한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2518-2533
• /
• 2020

In wireless sensor networks, adversaries may physically capture sensor nodes on the fields, and use them to launch false positive attacks (FPAs). FPAs could be conducted by injecting forged or old sensing reports, which would represent non-existent events on the fields, with the goal of disorientating the base stations and/or reducing the limited energy resources of sensor nodes on the fields. Researchers have proposed various mitigation methods against FPAs, including the statistical en-route filtering scheme (SEF). Most of these methods are based on key pre-distribution schemes and can efficiently filter injected false reports out at relay nodes through the verification of in-transit reports using the pre-distributed keys. However, their filtering power may decrease as time goes by since adversaries would attempt to capture additional nodes as many as possible. In this paper, we propose an adaptive key distribution method that could maintain the security power of SEF in WSNs under such circumstances. The proposed method makes, if necessary, BS update or re-distribute keys, which are used to endorse and verify reports, with the consideration of the filtering power and energy efficiency. Our experimental results show that the proposed method is more effective, compared to SEF, against FPAs in terms of security level and energy saving.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.51-56
• /
• 2014

TETRA(TErrestrial Trunked RAdio)는 디지털 TRS(Trunked Radio System)의 유럽 표준으로 재난통신에 특화된 서비스를 제공한다. 특히 TETRA에서 제공하는 DMO(Direct Mode Operation) 기능은 기지국 중계 없이 단말기간 직접통신이 가능하여 기지국 전파가 도달되지 않는 음영지역에 효과적으로 활용된다. 하지만 사용자들이 DMO기능을 보다 효과적으로 활용하기 위해서는 전파도달범위 예측 정보가 제공되어야 한다. 따라서 본 논문에서는 국내에 보급되어 운용 중인 TETRA DMO 단말기의 링크버짓을 계산하고 이를 경로손실 모델에 적용시켜 지역 환경별 전파도달 거리를 예측하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.175-181
• /
• 2004

The protection against transient instability and consequent out-of-step condition is a major concern for the utility industry. Unstable system may cause serious damage to system elements such as generators and transmission lines. Therefore, out-of-step detection is essential to operate a system safely. The detection of out-of-step is generally based upon the rate of movement of the apparent impedance. However such relay monitors only the apparent impedance which may not be sufficient to correctly detect all forms of out-of-step and cannot cope with out-of-step for a more complex type of instability such as very fast power swing. This paper presents the out-of-step detection algorithm using voltage frequency deviation. The digital filters based on discrete Fourier transforms (DFT) to calculate the frequency of a sinusoid voltage are used, and the generator angle is estimated using the deviation of the calculated frequency component of the voltage. The proposed out-of-step algorithm is based on the assessment of a transient stability using equal area criterion. The proposed out-of-step algorithm is verified and tested by using EMTP MODELS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.240-242
• /
• 2001

On this research, to catch up with international trend on the power system utilities move to be digitalized and move to network is certainly technological on the global business world, to compete with advanced foreign countries in the range of transmit and distribute power system and to take possession of first market share within country, we talked over a monitoring system to diagnose, monitor ACB(Air Circuit Breaker) only which is operated on the low level voltage Power plant. AMS(ACB Monitoring System) have be configured with several modules such as engine module which acquire engineering data from HICM360/860(Communication Control Units) and analyze and save it, database module which restore data and can be inquired, system monitoring view module which reflects fields information within a second, realtime trend window, historical trend window, reports as daily and yearly. In a near future, AMS must upgrade GUI to have easy to handle and have to have a field test to fit on real plants, so it will have faith in system reliability as it can apply power plant monitoring system in wide.