• 디지털콘텐츠학회 논문지
• /
• 제9권3호
• /
• pp.499-507
• /
• 2008

본 연구에서는 SCORM기반의 새로운 교수 학습 시스템을 연구하는 것을 목적으로 한다. 이를 위해 기존의 교수 학습 시스템의 장점과 단점들을 살펴보고 SCORM(Sharable Content Object Reference Model)에 대한 관련연구들을 통해 SCORM의 목적과 장단점등을 살펴본다. SCORM은 ADL(Advanced Distributed Learning)에서 교육용 콘텐츠의 재사용성을 높이기위해 제안한 모델이다. 또한 SCORM을 기반으로 구축된 시스템 사례들을 살펴본다. 본 연구에서는 이를 통해 SCORM을 기반으로 하면서 자기 주도적인 학습 및 코스 설계가 가능하고 수준별 개별 학습이 가능한 새로운 시스템을 제안하고자 한다. 새로운 시스템이 학습자의 학습 효과와 만족도를 높이는 것을 실험을 통해 보이고자 한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.201-207
• /
• 2005

This paper has investigated the sensorless vector control method of induction motor based on the stator flux oriented voltage equation and the digital low pass filter (LPF) with compensator of phase/gain. The Proposed vector control method is easy to decide the stator reference voltages and control of motor, since it is based on stator flux vector But this method has sensitive structure to excessive sensor noise and PWM pulsating components of stator currents because the measured stator currents are directly used to compensate the internal resistive voltage drop at the determination of stator reference voltages. To eliminate the noise sensitive of proposed vector drive, this paper propose the digital LPF with compensator of phase/gain base on orthogonal property of stator current vector in stationary $\alpha$, $\beta$ reference frame. The proposed methods have been simulated and implemented on a sensorless vector drive for 750W three-phase induction motor. The simulation and experimental results demonstrate effectiveness of the proposed methods.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.90-97
• /
• 2019

The charge redistribution digital-to-analog converter(CR-DAC) is often used for successive approximation register analog-to-digital converter(SAR ADC) that requiring low power consumption and small circuit area. However, CR-DAC is required 2 to the power of N unit capacitors to generate reference voltage for successive approximation of the N-bit SAR ADC, and many unit capacitors occupy large circuit area and consume more power. In order to improve this problem, this paper proposes SAR ADC using series capacitor DAC. The series capacitor DAC is required 2(1+N) unit capacitors to generate reference voltage for successive approximation and charges only two capacitors of the reference generation block. Because of these structural characteristics, the SAR ADC using series capacitor DAC can reduce the power consumption and circuit area. Proposed SAR ADC was designed in CMOS 180nm process, and at 1.8V supply voltage and 500kS/s sampling rate, proposed 6-bit SAR ADC have signal-to-noise and distortion ratio(SNDR) of 36.49dB, effective number of bits(ENOB) of 5.77-bit, power consumption of 294uW.

• 대한치과교정학회지
• /
• 제42권5호
• /
• pp.235-241
• /
• 2012

Objective: The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods: The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results: The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions: The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear.

• The Journal of Advanced Prosthodontics
• /
• 제15권1호
• /
• pp.22-32
• /
• 2023

PURPOSE. Digital technology has enabled improvements in the fitting accuracy of denture bases via milling techniques. The aim of this study was to evaluate the trueness and precision of digital and analog techniques for manufacturing complete dentures (CDs). MATERIALS AND METHODS. Sixty identical CDs were manufactured using different production protocols. Digital and analog technologies were compared using the reference geometric approach, and the Δ-error values of eight areas of interest (AOI) were calculated. For each AOI, a precise number of measurement points was selected according to sensitivity analyses to compare the Δ-error of trueness and precision between the original model and manufactured prosthesis. Three types of statistical analysis were performed: to calculate the intergroup cumulative difference among the three protocols, the intergroup among the AOIs, and the intragroup difference among AOIs. RESULTS. There was a statistically significant difference between the dentures made using the oversize process and injection molding process (P < .001), but no significant difference between the other two manufacturing methods (P = .1227). There was also a statistically significant difference between the dentures made using the monolithic process and the other two processes for all AOIs (P = .0061), but there was no significant difference between the other two processes (P = 1). Within each group, significant differences among the AOIs were observed. CONCLUSION. The monolithic process yielded better results, in terms of accuracy (trueness and precision), than the other groups, although all three processes led to dentures with Δ-error values well within the clinical tolerance limit.

• 기록학연구
• /
• 제76호
• /
• pp.61-117
• /
• 2023

본 연구는 대통령 지식 인프라를 연계하고 통합하여 관련 정보와 데이터를 적극적으로 공유 및 개방하는 '대통령디지털아카이브 플랫폼' 구축의 필요성을 제기한다. 대통령디지털아카이브 플랫폼은 대통령기록을 매개로 '대통령기록관', '대통령 관련 기록 소장기관' 그리고 '이용자'가 상호작용할 수 있는 '거버넌스 플랫폼'으로 대통령기록의 특성과 가치를 널리 알리고, 새로운 패러다임을 창출할 수 있는 계기를 마련할 수 있을 것이다. 이를 위해 '대통령기록포털 분석'과 '대통령 관련 기록 소장기관 분석'을 진행하여 대통령디지털아카이브 플랫폼 구축 시 개선점과 요구사항을 파악하고, 국내외 '디지털아카이브 플랫폼 사례분석'을 통해 시사점을 도출하여 대통령기록서비스 강화를 위한 방안을 논하였다. 마지막으로 그 결과를 바탕으로 플랫폼 구축을 위한 단계별 실행전략을 제시하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.599-602
• /
• 2002

A new approach of error concealment using a digital watermarking technique for interframe video coding is presented in this paper. In the proposed method, the most important feature of the reference frame is extracted. Then, this feature is embedded into the prediction error of current frame prior to transmission. Error concealment is achieved by means of recovering the erroneous reference frame using the embedded data before the reconstruction of current frame is performed. Simulation results demonstrated the effectiveness of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• 디지털콘텐츠학회 논문지
• /
• 제11권3호
• /
• pp.367-374
• /
• 2010

최근 무선인터넷 기술은 급속히 발전하고 있으며 새로운 모바일 미디어를 통하여 일상 생활에 직간접적으로 많은 영향을 끼치고 있다. 본 연구에서는 모바일 폰에 의한 촬영으로 이미지의 픽셀(Pixel) 정보를 얻어내고 DB에 저장된 레퍼런스(Reference)이미지와 비교하여 근접 값을 검색하는 알고리즘을 제안한다. 이것은 눈앞에 보이는 사물에 대한 정보에 대하여 알고 싶을 때 소지하고 있는 모바일 폰으로 이미지를 촬영한 후 인터넷 검색을 통해 알 수 있는 가능성을 제시한다. 또한 제안한 알고리즘에 의한 시스템의 예를 본 논문에 구현하였다.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.136-141
• /
• 2007

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to control the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.