• Journal of Korean Society of Rural Planning
• /
• v.7 no.1 s.13
• /
• pp.37-48
• /
• 2001

The purpose of this study is to suggest the landscape potential index for visualizing landscape information in the conservation of hilly landscape in urban fringe. For the visual and quantitative approach to topological landscape assessment, numerical entity data of DEM(digital elevation model) were processed with CAD-based utilities that we developed and were mainly focused on analysis of visibility and visual sensitivity. Some results, with reference in assessing greenbelt area of Eodeung Mt. in Gwangju, proved to be considerable in the landscape assessment of suburban hilly landscapes. 1) Since the viewpoints and viewpoint fields were critical to landscape structure, randomized 194 points(spatially 500m interval) were applied to assessing the generalized visual sensitivity, we called. Because there were similar patterns of distribution comparing to those by 56 points and 18 Points given appropriately, it could be more efficient by a few viewpoints which located widely. 2) Regressional function was derived to represent the relationships between probabilities of visibility frequency and the topological factors(topological dominance, landform complexity and relational aspect) of target field. 3) Visibility scores of each viewpoint were be calculated by summing the visual sensitivity indices within a scene. The scores to the upper part including ridge line have been more representative to overall distributions of visual sensitivities. Also, with sum of deviations of sensitivity indices from each single point's specific index to the weighting values of view points could be estimated rotationally. 4) The deviational distributions of visual sensitivity classes in the topological unit of target field were proved to represent the visual vulnerability of the landform. 5) Landscape potential indices combined with the visual sensitivity and the DGN(degree of green naturality) were proposed as visualized landscape information distributed by topological unit.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.357-359
• /
• 2009

In this paper, the 2.4GHz doppler radar system consisting of the doppler radar module and a baseband module were designed to detect heartbeat and respiration signal without direct skin contact. A bio-radar system emits continuous RF signal of 2.4GHz toward human chest, and then detects the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from quadrature signal of the doppler radar system are applied to the pre-processing circuit, amplification circuit, and the offset circuit of the baseband module. ECG(electrocardiogram) and reference respiration signals are measured simultaneously to evaluate the doppler radar system. As a result, the respiration signal of doppler radar signal is detected to 1m without complex digital signal processing. The sensitivity and calculated from I/Q respiration signal were $98.29{\pm}1.79%$, $97.11{\pm}2.75%$, respectively, and positive predictivity were $98.11{\pm}1.45%$, $92.21{\pm}10.92%$, respectively. The sensitivity and positive predictivity calculated from phase and magnitude of the doppler radar were $95.17{\pm}5.33%$, $94.99{\pm}5.43%$, respectively. In this paper, we confirmed that noncontact real-time heartbeat and respiration detection using the doppler radar system has the possibility and limitation.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.89-101
• /
• 1999

This paper represents methods to calculate heights of buildings by estimating their shadow lengths in a single and panchromatic image of the KVR-1000 camera system Shadows are identified Com brightness intensity of each pixel, and their lengths are measured. Two methods are implemented to estimate heights from shadows. One method is to use a ratio of shadow s lengths with respect to heights of reference buildings measured on site. The other method uses sun elevation angles calculated from various camera s parameters at the exposure time. The estimated heights of 20 buildings are compared with heights measured on site, and the RMS errors for each method are 1.70m and 1.75m, respectively. When a resampling method to enhance identification of shadows is used and their lengths are accordingly re-calculated, the estimated errors for each method are significantly reduced to 1.17m and 1.16m, respectively. Meanwhile, effects of land slope on shadows can be hardly obtained unless detailed DTM(digital terrain model) are available, and they introduce additional errors up to 25m.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.81-89
• /
• 2020

Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1495-1506
• /
• 2004

This study was attempted to clarify the characteristics of elderly women's foot shape by examining the various measurements of women over 60 years old as compared with those of women in twenties considered as reference group. The subjects were 321 elderly women and 181 young women. Their right feet were measured directly and indirectly by using scanner and digital camera. The anthropometric measurements were composed of 62 items. They were measured during the months of July and August in 2001. As a result of comparing actual measurements of foot between the two groups, it was found that the elderly women tended to have shorter and lower foot than those among the young women. Among the elderly women, in addition, it was revealed that many deformities related to toes or legs led to the toes concentrated to the central axis of feet resulting in relatively steeper lateral angle of toe, and the heels and legs slanting forwards. As a result of comparing index values of foot between the groups, the elderly women's foot had the relatively wide width and low height in comparison with the length, showing more elliptical flattening than those of the young women. And, the width of the inside was wider than that of the outside, and the toe width was relatively short in comparison with the foot width resulting in severe deformities on the toes or the central axis of foot. Therefore, it was found that there were several deformities including flat foot or deformed toes among elderly women. It is expected that the characteristics of elderly women's foot shown in the results mentioned above will be used as the basic data in designing the footwear for elderly women.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.476-496
• /
• 2018

With the advancement and deployment of wireless communication techniques, wireless body area network (WBAN) has emerged as a promising approach for e-healthcare that collects the data of vital body parameters and movements for sensing and communicating wearable or implantable healthful related information. In order to avoid any possible rancorous attacks and resource abuse, employing lightweight ciphers is most effective to implement encryption, decryption, message authentication and digital signature for security of WBAN. As a typical lightweight cryptosystem with an extended sponge function framework, the PHOTON family is flexible to provide security for the RFID and other highly-constrained devices. In this paper, we propose a differential fault analysis to break three flavors of the PHOTON family successfully. The mathematical analysis and simulating experimental results show that 33, 69 and 86 random faults in average are required to recover each message input for PHOTON-80/20/16, PHOTON-160/36/36 and PHOTON-224/32/32, respectively. It is the first result of breaking PHOTON with the differential fault analysis. It provides a new reference for the security analysis of the same structure of the lightweight hash functions in the WBAN.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.66-74
• /
• 2005

This paper presents an implementation of digital servo speed control system of SPMSM(Surface-mounted Permanent Magnet Synchronous Motor) for industrial application with Direct Torque Control(DTC) using TMS320F2812 DSP. Although, the vector control scheme is adapted in many industrial servo system, but the DSP calculation ratio is increased by reference frame transformation and SVPWM of vector control. Therefore, this paper investigate the possibility of DTC scheme for industrial servo drive system instead of vector control scheme. DSP calculation ratio is compared between vector control and DTC algorithm in addition to the characteristic of speed control response. The suggested SPMSM control system shows the possibility of DTC scheme for industrial servo motor drive system instead of a vector control algorithm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.109-126
• /
• 2006

As the national interest in sports has been increased over time, sports facilities and sports complex are considered more than just physical environments for training athletes or watching games. Sports facilities now become symbolic spatial devices to represent the national and cultural pride of any countries. The existing national training camp located in Taenung, Seoul is gotting outdated and degraded. The polluted air in the city risks athletes' health condition. The government planned to construct the second training camp at Jincheon, Chungbuk at the area of $2,171,910m^2$. The Korea Sports Council called for proposals to envision the future training camp, and they held a design competition from August to November, 2005. The first phase was to present the masterplan for the entire site including training buildings, outdoor training facilities, dormitories, a visitor center, a research center, education and administration buildings. Considering the size of the site, the planning process required a strong relationship between landscape and architecture. This study tries to provide general explanations on the winning proposal focused on the landscape-related issues. It also attempts to have reference points for contemporary planning and design issues to situate the project in the stream of continuing design effort to avoid the dichotomy between nature and culture. The landscape proposal for the new national taming camp suggests four main strategies; 1) The camp has two intersecting and interweaving parks which represent the natural and urban order. 2) The entire site is organized and networked by the flow of landscape called landscape ribbon in terms of topography, vegetation, and water flow. 3) The landscape is choreographed through the time and process. 4) The ecological process and the digital contents are juxtaposed in the landscape. This winning proposal is the first step to portray the national vision for the sustainable environment coexisting with sports industry. Landscape in this proposal is an active agent to network various parts of the site which enables landscape to be infrastructure. Landscape design in this proposal should be considered open-ended strategies rather than determined concrete forms and its engaging further development will be tested in following Design-Build phase.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.11-18
• /
• 2013

Eulsukdo located in the Nakdong Estuary plays important role in ecosystem and coastal wetland. There have been various changes in Eulsukdo up to now. Recently, we expect a great change of the western part of shoreline in Eulsukdo due to the floodgate construction but there is few databases. In this study, shorelines were digitized after we had produced the ortho-images by using aerial photos taken for 30 years(8 times). SCE, NSM and EPR were analysed by DSAS 4.2 program using vector data. In addition, the changes of shoreline were analysed in October 2011 from before Eulsukdo water gate construction to now by adding field surveying with VRS. The amount of years shoreline change is -0.34m/yr in 2009(before water gate construction) and -0.50m/yr in 2011(during the water gate construction), and the change trend shows an accumulation aspect.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.103-112
• /
• 2014

The objective of this study is to suggest the possibility on land cover classification using hyperspectal imagery on area which includes lands and waters. After atmospheric correction as a preprocessing work was conducted on hyperspectral imagery acquired by airborne hyperspectral sensor CASI-1500, the effect of atmospheric correction to a few land cover class in before and after atmospheric correction was compared and analyzed. As the result of accuracy of land cover classification by highspectral imagery using reference data as airphoto and digital topographic map, maximum likelihood method represented overall accuracy as 67.0% and minimum distance method showed overall accuracy as 52.4%. Also product accuracy of land cover classification on road, dry field and green house, but that on river, forest, grassland showed low because the area of those was composed of complex object. Therefore, the study needs to select optimal band to classify specific object and to construct spectral library considering spectral characteristics of specific object.