• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.25-37
• /
• 1995

The phenomenological loss equivalence method incorporated into the wideband lossy transmission line model is applied to the characterization of high desity digital transmission lines. The pulse propagation characteristics are analyzed using the calculated frequency characteristics and the discrete Fourier transformation. This approach has been verified by comparing the calculated frequency characteristics with the FEM and the esperimental results. This method is very suitable for computer-aided analysis of high density/high speed interconnection circuits because of the simple calculation as well as the calculation accuracy. We have found that pulse ftransmission speed and dispersion of hgih density digital transmission lines can be optimized by managing the conductor and dielectric losses in addition to the impedance matching.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.16-25
• /
• 1994

The prediction of crosstalk in one of important problems in estimating the EMC of a system for high speed digital signal transmission. Crosstalk curves are shown in terms of characteristic impedance of lines spacing between lines and rise time of pulse by using general multiple coupled transmission line equation and harmonic-balance method. The coupled symmetrical two-line on dielectric material epoxy-glass FR 4(${\varepsilon}_r$), is fabricated to measure crosstalk occuring at the near end and far end of the passive line. The inter-line is inserted to reduce crosstalk between two microstrip lines. The simulation results and the measurement results are shown and found to be very close.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.185-192
• /
• 2003

Digital Manufacturing-based production could be very effective in shipbuilding in order to save costs and time, to increase safety for workers, and to prevent bottleneck processes in advance. Digital shipbuilding system, a simulation-based production tool, is being developed to achieve such aspects in Korea. To simulate material flow in a subassembly line at a shipyard, the product, process and resources was modeled for the subassembly process which consisted of several sub-processes such as tack welding, piece alignment, tack welding, and robot welding processes. The analysis and modeling were carried out by using the UML(Unified Modeling Language), an object-oriented modeling method as well as IDEF(Integration DEFinition), a functional modeling tool. Initially, the characteristics of the shop resources were analyzed using the shipyard data, and the layout of the subassembly line was designed with the resources. The production process modeling of the subassembly lines was performed using the discrete event simulation method. Using the constructed resource and process model, the productivity and efficiency of the line were investigated. The number of workers and the variations In the resource performance such as that of a new welding robot were examined to simulate the changes in productivity. The bottleneck process floated according to the performance of the new resources. The proposed model was viewed three-dimensionally in a digital environment so that interferences among objects and space allocations for the resources could be easily investigated

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2492-2494
• /
• 1998

Recently the optical fiber lines have been widely deployed in the trunk lines and digital data service network. The unexpected failures of optical fiber lines by natural disasters and road construction work have increased rear by rear and the number of damaged telecommunication lines per failures is on increasing. In the meantime, it takes long time to recover the optical fiber lines failures. So, it is important to maintain and monitor the status of optical fiber lines for prevention of optical fiber lines failures. Therefore, KT(Korea Telecom) needs efficient and automatic maintenance system to operate and monitor the optical fiber lines. FLOMS(Fiber Line Operation and Monitor System) had been developed in '96 and pilot system was installed at telephone offices in '97. This paper describes the FLOMS which carries out the functions of efficient maintenance and supports for monitoring optical fiber lines and managing facilities in optical fiber lines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.255-265
• /
• 1999

Recently the necessity of MMIC is increasing because clock frequency goes up by digital data transmission of Gbps class being demanded and the density of circuits gets high for the purpose of lightening and miniaturizing system, owing to the development of ultra high speed. When massing lines in a MMIC and super high speed integrated circuit cause the crosstalk and dispersion of signal, a digital signal is distorted and EMI is occurred. To solve this problems, It is necessary to analyze the equivalent parameters of transmission lines. This paper represent the results of the equivalent parameters of transmission lines for single and hi-level structure by using moment method.

• 전기의세계
• /
• v.23 no.1
• /
• pp.61-68
• /
• 1974

This paper attempts to develop the algorithms and computer program for load flow solution and faults analysis of large power system by small digital computer. The Conventional methods for load flow solution and fault analysis of large power system require too much amount of computer memory space and computing time. Therefore, this paper describes the methad for reducing the computer memory space and computing time as follows. (1) Load Flow Solution; This method is to store each primitive impedance of lines along with a list of bus numbers corresponding to the both terminals of lines, and to store only nonzero element of bus admittance matrix. (2) Faults Analysis: This method is to partition a large power system into several groups of subsystems, form individual bus impedance matrix, store them in the storage, and assemble the only required portion of them to original total system by algorithm.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1999

The Korean government is developing a systematic plan of integrated coastal management for effective conservation, utilization, and development of coastal areas. For this plan, integrated maps of land maps and nautical charts are indispensable. However, these maps are not made, nor studied yet in terms of integration, although digital maps(DM) on land and electronic nautical charts(ENC) have been recently developed by Korean Geography Institute and National Marine Investigation Institute, respectively. In this study, as preliminary studies to make eventual integrated maps, the concept of coastal areas are defined, specifically, coastal lines from DM and ENC are matched against each other. Issues on map production procedures, coordinate systems, and map projections, are carefully considered. A test coastal area located in Seo-Gu, Pusan, over 14 km of coastal lines is selected for the edge matching of coastal lines. RMS differences are 13.83 m and 4.37 m over man-made coastal lines and natural coast lines, respectively, which are quite larger considering a scale difference and other factors. However, no systematic differences are found.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.50-56
• /
• 2009

This paper describes the design of image data transmitter for portable media device for Mobile Display Digital Interface standard. The transmitter uses connection lines to 6 to transmit QVGA image data. In this paper, the transmitter is using only 9 packets for image processing and a state-machine based design is adapted for packet processing. The design was verified using FPGA Xilinx virtex4-LX60. Data rate of the transmitter is 363Mbps with six connection lines. The transferring capability is 30 frame of 24bit RGB 500,000 pixel image data per second.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.83-89
• /
• 2002

The cadastral maps as many as about 750,000 map sheets to cover 34,751,000 parcels of land of Korea, are being digitalized. The problem of shrinkage-expansion of the paper cadastral maps has to be resolved for the new digital maps, where the nodes and vertices of the parcel boundaries are represented by coordinates. The photo coordinate refinement techniques, two dimensional projective transformation and local area transformation as in the reseau grid method, were introduced for this distortion correction. Using the fact that original maps drawn on the plane tables in field from 1910 to 1918 have grid lines and have been preserved well, a strategic flow to apply the refinement techniques to the digital maps with the original maps as controls was developed. To accommodate the presence or absence of the original maps and grid lines, and different scales and sizes of the maps, the strategy was implemented by a computer program package. Various distortions and corrections were simulated and errors were evaluated. The RMS errors in the corrected digital maps were allowable, thus, the method developed in this study was to be applicable for the digital cadastral maps.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1394-1400
• /
• 2014

The current flowing through the overhead transmission lines causes induced voltage on the communication lines, which can be prevented by calculating the induced voltage at the planning stage for overhead transmission line installment through an agreement between the communication and electric power companies. The procedures to calculate the induced voltages, however, are complicated due to the variety of parameters and tower types of the overhead transmission lines. The difficulty necessitates the development of a simulator to measure the induced voltage on the communication lines. This paper presents two simulators developed for this purpose; one using the Data Base (DB) index method and the other using the Graphic User Interface (GUI) method. The simulators described in this paper have been implemented by the EMTP (Electromagnetic Transient Program).