• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.686-694
• /
• 2017

Due to the wide use of electronic products, digitally controlled DC-DC converters are attracting more and more attention in recent years. However, digital control strategies may introduce undesirable Limit Cycle Oscillation (LCO) due to quantization effects in the Analog-to-Digital Converter (ADC) and Digital Pulse Width Modulator (DPWM). This results in decreases in the quality of the output voltage and the efficiency of the system. Meanwhile, even if the resolution of the DPWM is finer than that of the ADC, LCO may still exist due to improper parameters of the digital compensator. In order to discover how LCO is generated, the state space averaging model is applied to derive equilibrium equations of a digital PID controlled DC-DC converter in this paper. Furthermore, the influences of the parameters of the digital PID compensator, and the resolutions of the ADC and DPWM on LCO are studied in detail. The amplitude together with the period of LCO as well as the corresponding PID parameters are obtained. Finally, MATLAB/Simulink simulations and FPGA verifications are carried out and no-LCO conditions are obtained.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.652-657
• /
• 1987

This paper describes an application of CMOS Gate Array Integrated Cricuits to the implementation of three functional units: A Multiplexer, Time Switch, and Demultiplexer in the Switching Network and Digital Line Concentrator of TDX-1 system, which is a fully digital time division electronic switching system in Korea. The application of CMOS Gate Array Integrated Circuits significantly improves the overall system performance in terms of power consumption, cost, size, reliability, and timing margin, etc.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2212-2220
• /
• 2016

Based on the conventional PID algorithm and the adaptive PID (AD-PID) algorithm, a separate sampling adaptive PID (SSA-PID) algorithm is proposed to improve the transient response of digitally controlled DC-DC converters. The SSA-PID algorithm, which can be divided into an oversampled adaptive P (AD-P) control and an adaptive ID (AD-ID) control, adopts a higher sampling frequency for AD-P control and a conventional sampling frequency for AD-ID control. In addition, it can also adaptively adjust the PID parameters (i.e. $K_p$, $K_i$ and $K_d$) based on the system state. Simulation results show that the proposed algorithm has better line transient and load transient responses than the conventional PID and AD-PID algorithms. Compared with the conventional PID and AD-PID algorithms, the experimental results based on a FPGA indicate that the recovery time of the SSA-PID algorithm is reduced by 80% and 67% separately, and that overshoot is decreased by 33% and 12% for a 700mA load step. Moreover, the SSA-PID algorithm can achieve zero overshoot during startup.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.1-6
• /
• 2001

A $1"{\times}l"$, $512{\times}512$ poly-Si TFT-LCD with a new integrated 8-bit parallel-serial digital data driver was proposed and designed. For high resolution, the proposed parallel-serial digital driver used serial video data rather than parallel ones. Thus, digital circuits for driving one column line could be integrated within very small width. The parallel-serial digital data driver comprised of shift registers, latches, and serial digital-to-analog converters (DAC's). We designed a $1"{\times}l"$, $512{\times}512$ poly-Si TFT-LCD with integrated 8-bit parallel-serial digital data drivers by a circuit simulator which has physical-based analytical model of poly-Si TFT's. The fabricated shift register well operated at 2 MHz and $V_{DD}$=10V and the fabricated poly-Si TFT serial DAC's, which converts serial digital data to an analog signal, could convert one bit within $2.8{\mu}s$. The driver circuits for one data line occupied $8100{\times}50{\mu}m^2$ with $4{\mu}m$ design rule.

• 전자공학회논문지C
• /
• 제34C권2호
• /
• pp.1-11
• /
• 1997

We developed a base station modulator ASIC for CDMA digital cellular system. In CDMA digital cellular system, the modulation is performed by convolutional encoding and QPSK with spread spectrum. The function blocks of base station modulator are CRC, convolutional encoder, interleaver pseudo-moise scrambler, power control bit puncturing, walsh cover, QPSK, gain controller, combiner and multiplexer. Each function block was designed by the logic synthesis of VHDL codes. The VHDL code was described at register transfer level and the size of code is about 8,000 lines. The circuit simulation and logic simulation were performed by COMPASS tools. The chip (ES-C2212B CMB) contains 25,205 gates and 3 Kbit SRAM, and its chip size is 5.25 mm * 5,45 mm in 0.8 mm CMOS cell-based design technology. It is packaged in 68 pin PLCC and the power dissipation at 10MHz is 300 mW at 5V. The ASIC has been fully tested and successfully working on the CDMA base station system.

• 센서학회지
• /
• 제5권5호
• /
• pp.63-68
• /
• 1996

출력신호를 검출하기 위한 집적화한 용량형 압력센서를 구현하기 위해서는 센서의 특성에 나쁜 영향을 미치는 기생용량, 온도/열 드리프트 및 누설전류 등의 요소가 개선 되어야 한다. 본 논문에서는 2개의 용량-주파수 변환기와 4비트 디지탈 보상회로로 구성된 새로운 이상적인 인터페이스 회로를 설계 하였다. 이 회로는 센싱 센서 주파수를 기준 센서 주파수로 나누어줌으로써 드리프트 및 누설전류의 영향이 제거될 수 있도록 설계 되었고, 신호 전송시 잡음의 영향이 적은 디지탈 신호를 처리하도록 되어있다. 그르므로 이 회로는 디지탈 비트수를 늘려 줌으로 출력신호의 분해능을 향상 시킬 수 있다. 또 이 회로 중 디지털 부분은 FPGA 칩으로 제작되어 그 작동이 확인 되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.970-973
• /
• 2003

Abstract An idea to redce the direct-path short circuit current of the CMOS digital integrated circuit is present. The sample circuit model of the CMOS digital circuit is the CMOS current-control digital output driver circuit, which are also suitable for the low voltage supply integrated circuits as the simple digital inverter, are present in this title. The circuit consists of active MOS load as the current control source, which construct from the saturated n-channel and p-channel MOSFET and the general CMOS inverter circuits. The saturated MOSFET bias can control the output current and the frequency response of the circuit. The experimental results show that lower short circuit current control can make the lower frequency response of the circuit.

• 한국음향학회지
• /
• 제24권1호
• /
• pp.11-20
• /
• 2005

본 논문에서는 PLL (Phase Locked Loop)없이 동작할 수 있는 S/PDIF (Sony Philips Digital Interface) 수신기의 연구에 관하여 다룬다. 현재 대부분의 오디오 장치와 오디오 프로세서에서 S/PDIF 수신기가 사용되고 있음에도 불구하고, 국내에서는 이에 관한 연구가 많지 않은 실정이다. 현재 사용되고 있는 S/PDIF 수신용 상용 DAC(Digital-to-Analog Converters) 칩들은 모두 내부에 PLL 회로를 포함하고 있다. PLL 회로는 S/PDIF 디지틸 신호로부터 클럭 정보를 뽑아내고 클럭과 입력 신호간의 동기화를 맞추는 역할을 한다. 그러나, PLL 회로는 "아날로그 회로"라는 특성 때문에 VLSI (Very Large Scale Integrated Ciruits)회로의 SOCs (System On Chips)설계에 있어 많은 어려움을 야기한다. 본 논문에서는 PLL 회로 없이 순수 디지털 회로로만 구현된 S/PDIF 수신기를 제안하였다. 제안된 수신기의 핵심 아이디어는 16 MHz의 기본 클럭과 S/PDIF 신호의 속도비를 이용한다는 것이다. 본 논문에서는 수십만개의 S/PDIF 입력 신호에 대한 디코딩 확인 후, PLL같은 아날로그 회로 없이 순수 디지틸 회로만으로 S/PDIF 수신기를 설계할 수 있음을 확인하였다. 제안된 S/PDIF 수신기는 SOC 설계용 If로서 활용될 수 있을 것으로 본다.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.56-61
• /
• 2013

Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.346-355
• /
• 2015

On the basis of the conventional PID control algorithm, a modified adaptive PID (MA-PID) control algorithm is presented to improve the steady-state and dynamic performance of closed-loop systems. The proposed method has a straightforward structure without excessively increasing the complexity and cost. It can adaptively adjust the values of the control parameters ($K_p$, $K_i$ and $K_d$) by following a new control law. Simulation results show that the line transient response of the MA-PID is better than that of the adaptive digital PID because the differential coefficient $K_d$ is introduced to changes. In addition, experimental results based on a FPGA indicate that the MA-PID control algorithm reduces the recovery time by 62.5% in response to a 1V line transient, 50% in response to a 500mA load transient, and 23.6% in response to a steady-state deviation, when compared with the conventional PID control algorithm.