• The Journal of Society for e-Business Studies
• /
• v.14 no.3
• /
• pp.169-181
• /
• 2009

As the situations that important evidences or clues are found in digital information devices increase, digital forensic technology is widely applied. In this paper, forensic based audit system is implemented by associating forensic analysis system with agent system which monitors and collects data for analysis in storage devices over distributed network nodes. Forensic audit system implemented in this paper can prevent, audit and trace the computer related crimes in IT infrastructure by real time monitoring and evidence seizure.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.178-185
• /
• 2006

Recently, the demand for the development of high quality and high-speed laser printers and efficient power utilization has required. Among complicated electro-mechanic devices in laser printers, the toner-fusing unit consumes above 90[%] of all electrical energy needed for printing devices. Therefore, the development of a more effective energy-saving toner fusing process becomes a significant task in great demand. Generally, there are several ways to implement a fusing unit. Among them this paper presents a new induction heating method. The proposed induction heating method enables the increase of coupling coefficient between heating coil and heat roller which also increases total energy transfer efficiency. Therefore, the proposed IH (Induction Heating) inverter system provides very fast W.U.T. (Warm UP Time) as well as higher efficiency. Through experimental results, the proposed control system is verified.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.581-596
• /
• 2010

The purposes of this study are to investigate and analyze the level of information and the state of digital divide of the disabled by surveying the demand for information and communication assistive devices, and to provide basic data for plans on the development and utilization of information and communication assistive devices. In order to understand the actual condition and the state of digital divide of persons with disabilities, the differences of possession and accessibility of information technology devices, usage ability, and utilization were analyzed according to the disability profile by using the T-test. The results show that there are significant differences (T=-2.510*) of possession and accessibility of information technology devices with respect to the disability profile, and that the disabled have lower possession and accessibility of devices than the non-disabled. Result of this study's demand forecast shows that about 28% of total respondents are currently using information and communication assistive devices, and a majority (67%) of them answered that the use of assistive devices lend great help to their lives. The proportion of those who have been supported by the government or related organizations with information and communication assistive devices were 36% of the total respondents, and those satisfied with the performance of the devices were 46% of the total responses. Meanwhile, only 36% of total users answered that the operation and use of functions of the devices was easy and convenient, responding that the difficulty of operating assistive devices was the greatest inconvenience. Moreover, the general requests of respondents in regards to the devices were stabilization of device performance, miniaturization of size, simplification of buttons, and reduction of weight.

• Journal of Digital Convergence
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2011

A mobile device is a handheld device, typically having a display screen with touch input and/or a miniature keyboard and accessible to the Internet. Because mobile devices are innovative and rapidly changing products, consumers are confronted with a decision-making problem to select the best device. This paper proposes an Analytic Hierarchy Process method to assess mobile devices and shows a method to select best mobile devices when purchasing. For this paper, the mobile devices considered as in the AHP model included net-book, tablet PC, smart phone, and camera phone. We derived 6 main criteria and 15 sub-criteria to synthesize the overall priority of criteria and mobile devices. The criterion of convenience in carrying showed the highest rank in the criteria. Although smart phones had the highest priority, the four mobile devices did not show significant differences in consumer preference.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2021

With the rapid increase in the use of IoT and mobile devices, cyber criminals targeting IoT devices are also on the rise. Among IoT devices, when using a wireless access point (AP), problems such as packets being exposed to the outside due to their own security vulnerabilities or easily infected with malicious codes such as bots, causing DDoS attack traffic, are being discovered. Therefore, in this study, in order to actively respond to cyber attacks targeting IoT devices that are rapidly increasing in recent years, we proposed a method to collect traces of intrusion incidents artifacts from IoT devices, and to improve the validity of intrusion analysis data. Specifically, we presented a method to acquire and analyze digital forensics artifacts in the compromised system after identifying the causes of vulnerabilities by reproducing the behavior of the sample IoT malware. Accordingly, it is expected that it will be possible to establish a system that can efficiently detect intrusion incidents on targeting large-scale IoT devices.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.65-80
• /
• 2007

The input and output device requires precise color representation and CMS (Color Management System) because of the increasing number of ways to apply the digital image into electronic publishing. However, there are slight differences in the device dependent color signal among the input and output devices. Also, because of the non-linear conversion of the input signal value to the output signal value, there are color differences between the original copy and the output copy. It seems necessary for device-dependent color information values to change into device-independent color information values. When creating an original copy through electronic publishing, there should be color management with the input and output devices. From the devices' three phases of calibration, characterization and color conversion, the device-dependent color should undergo a color transformation into a device-independent color. In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After undergoing a color transformation in the input and output devices, the best results were created when the original target underwent a color transformation by the scanner and digital camera input device by the linear multiple regression, and the LCD output device underwent a color transformation by the GOG model.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.41-52
• /
• 1994

Currently, the CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However according to the recent technical advances, new large format CCDs are rapidly developed which have better performances with higher quantum efficiency and sensitivity. In many cases, some microprocessors have been adopted to deal with necessary digital logic for a CCD imaging system. This could often lack the flexibility of a system for a user for to upgrade with new devices, especially if it is a commercial product. A new design concept has been explored which could provide the opportunity to deal with any format of devices from any manufactures effectively for as tronomical purposes. Recently available PLD (Programmable Logic Devices)technology makes it possible to develop such digital circuit design, which can be integrated into a single component, instead of using micrprocessors. The design concept could dramatically increase the efficiency and flexibility of a CCD imaging system, particularly when new or large format devices are available and to upgrade the performance of a system. Some variable system control parameters can be selected by a user with a wider range of choice. The software can support such functional requirements very conveniently. This approach can be applied not only to astronomical purpose, but also to some related fields, such as remote sensing and industrial applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.325-329
• /
• 2011

We are developing a minimized integrated public address system that has facilities such as external input, Mic., CD, MP3 and Radio. In this paper, developing an integrated public address system with operational MICOM will make it possible to control the facilities of digital devices centrally. The operational MICOM is composed of 3 layers which are a control layer, a processing layer and a user interface layer. The control layer controls digital devices in the integrated public address and the processing layer is for processing voice data editing, controlling signals of devices and providing status information of the device. The user interface layer displays the status of control devices and the data processing of a user. A remote control is used for the central control.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1114-1121
• /
• 2007

Home networks is a network composed of devices in home and is being expanded by evolving devices. Also, The number of digital contents in home network has been increasing steadily. But it is difficult to continually protect the rights of digital contents due to lack of interoperability among contents devices. Besides, a license has to be re-issued by DRM sever for contents transfer between devices. Thus, this paper proposes framework which can freely transfer the contents to another device through mutual device authentication and a system that can decrease overload of license management of the DRM server and that enable users outside home network to use contents through user authentication.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.6-25
• /
• 2002

In this paper, we have implemented UPnP Devices which emulate a Control Point, a Light Controller, and a Digital TV. The Control Point has been developed on Linux host system by using C language. The UPnP Devices emulating the Digital TV and Light Controller are running on embedded linux developer board. For the development of UPnP Devices, UPnP SDK API Vl.04 made by Intel Co. Ltd. has been ported on Assabet Linux Reference board to implement the UPnP protocol. After we analyze and design some services of Digital TV device, we have applied UPnP Device program to those devices. UPnP SDK vl .04 consists of APIs which support HTTP, SSDP, SOAP, GENA and XML DOM Level-1 that are cores of UPnP protocol. The C program written for the UPnP Control Point has been compiled and executed on Linux-based PC. The embedded system running on Embedded Linux OS has been connected all together through Ethernet which allows IP-based communications. Under this environment, the UPnP programs are being executed on each device. Control Point, when in operational mode, discovers UPnP Devices on the network and displays the device list on the consol. By selecting one of the functionalities of the device services that are displayed on the Control Point, the controllability has been accomplished. The experiment that we performed in this thesis have revealed that the Control Point and UPnP Devices have supported the protocols including SSDP, SOAP, GENA, and DHCP.