• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.631-636
• /
• 2005

Recently, research started to focus on Digital Multimedia Broadcasting(DMB), while the DMB service is already being launched to provide high quality audio, video and data broadcasting in Korea. Therefore, the demand for multimedia contents is also rose very sharply. In this paper, we introduced an MPEG-4 contents authoring system with mobile device for Digital Multimedia Broadcasting. Our system allows both single-handed and collaborative authoring modo. Further more, to overcome the delaytime for decoding the BIFS information, we also introduced an efficient algorithm to generate dynamic and light BIFS information.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.42-46
• /
• 2012

We have developed a fluorescence optical detection system using a digital micromirror device (DMD) for monitoring 3D cell culture matrices in situ. Full 3D imaging with fast scanning speed was implemented by the combined action of a DMD and a motorized stage. Imaging results with fluorescent microbeads measure the minimum axial resolution of the system as $6.3{\mu}m$, while full 1-mm scanning through 3D alginate-based matrix was demonstrated. For cell imaging, improved images were obtained by removing background fluorescence although the scanning distance was reduced because of low intracellular fluorescence efficiency. The system is expected to be useful to study various dynamics and behaviors of 3-dimensionally cultured cells in microfluidic systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.272-275
• /
• 1992

Recently, the digital circuit technique has had great success and gained importance in all industries. For the measurement of degree of freshness of plant and animal's tissue, many devices has been developed. But it's data was inaccurate and it had difficulty in making database because it was depend on analog circuit technique. The purpose of this paper is the development of a device based on digital circuit for measurement of freshness degree of wet fish such that its accuracy is very trustworthy and it can be measured in a short time. The device is developed by using micro-computer with some interface modules of A-D/D-A converter and digital circuit with IC modules and its effectiveness has been evaluated through two experimental results of electrical Q-value test and chemical K-value test.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.146-151
• /
• 2006

In order to increase the productivity of conventional microstereolithography, a new method using a digital micromirror device ($DMD^{TM}$) as the dynamic patter generator is proposed. The deviation from the level of clear optical images to the level of photopolymer surface is a key for the fabrication of an accurate 3D structure, so this deviation is minimized by controlling the viscosity of FA 1260T with organic solvents. After finding the appropriate process variables, the feasibility of microstructure fabrication such as a microgear and a microsphere is demonstrated. Microstereolithography with $DMD^{TM}$ showed the potential to replace the existing focused beam microstereolithography.

• Laser Solutions
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2006

In order to increase the productivity of conventional microstereolithography (MSL), digital micromirror device($DMD^{TM}$) based MSL is proposed and the feasibility of 3D rnicrocomponents fabrication is demonstrated in two ways; free surface and constrained surface techniques. The clearness of optical images at the exposure plane was confirmed for the fabrication of an accurate 3D structure by controlling the dynamic viscosity of FA1260T and the shape accuracy of a structure fabricated with epoxy-based resin ($Somos^{\circledR}$ 10120) was analyzed to determine the optimum curing conditions. After finding the appropriate process variables, the feasibility of multiple microstructures is then demonstrated. Due to the high productivity, MSL using $DMD^{TM}$ showed the potential to replace the existing focused laser beam MSL.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.127-132
• /
• 2012

This study discusses photoresist forming using a composite grayscale to fabricate a Fresnel lens. Grayscale lithography is a common production method used to facilitate the forming of lenses with different curvatures and depths. However, this approach is time consuming and expensive. This study proposes a method for overcoming these obstacles by integrating a digital micromirror device and microscope to supplant the traditional physical grayscale mask. This approach provides a simple and practical maskless optical lithography system. According to the results, the two adjacent grayscales displayed substantial differences between the high grayscale and influence the low grayscale that ultimately affected photoresist formation. Furthermore, we show that change of up to 150% in the slope can be achieved by changing the grayscale gradient in the central zone and the ring profile. The results of the optical experiment show a focus change with different gray gradients.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.221-227
• /
• 2012

We propose optical proximity corrections (OPCs) for digital micromirror device (DMD)-based maskless lithography. A pattern writing scheme is analyzed and a theoretical model for obtaining the dose distribution profile and resulting structure is derived. By using simulation based on this model we were able to reduce the edge placement error (EPE) between the design width and the critical dimension (CD) of a fabricated photoresist, which enables improvement of the CD. Moreover, by experiments carried out with the parameter derived from the writing scheme, we minimized the corner-rounding effect by controlling light transmission to the corners of a feature by modulating a DMD.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.509-513
• /
• 2005

In order to increase productivity in conventional stereolithography. Microstereolithography using a digital micramirror device $(DMD^{TM})$ as a dynamic patter generator is proposed The deviation from a level of clear optical images to a level of a photopolymer surface is a key for the fabrication of an accurate 3D structure. so this deviation is minimized by controlling the viscosity of FA1260T with organic solvents. After finding the appropriate process valuables (exposure time of optical images. layer thickness of each layer). the feasibility of microstructures such as a microgear and a microsphere is then demonstrated. Microstereolithography wi th $DMD^{TM}$ might eventually replace conventional laser induced microstereolithography market such as in the manufacturing of jewels and medical parts.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.107-115
• /
• 2020

The computing environment is rapidly changing to mobile device base, with the development of computer technology. Until now, digital literacy education has been based on desktop PC education, but it is time to change it into literacy education suitable for mobile environment. In this paper, we propose a mobile-based digital literacy MoDL (Mobile Device Digital Literacy). MoDL proposes three phases. One is Mobile Based Digital Environment (MoDE), which builds a mobile digital environment, seconds is Bring Your Own Devices (BYOD) class method when using it for education. Finally, MoDLI (MoDL Instruction) for learning mobile literacy is presented step by step. To verify the validity of the proposed, eight experts were surveyed so that the Content Validity Ratio was calculated. As a result, CVR was ensured in all items except for the applicability of MoDLI.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.12b
• /
• pp.17-28
• /
• 2000

Recently, as the prepress mainstream is changed to the digital workflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. However, most of the digital proofing devices have lower resolutions than analog proofing systems and differ with actual color presses in the color gamuts. Therefore, proper color compensations are needed for digital color proofing in order to match color between the proofs and the press sheets. In this paper, we used 3-dimensional look-up table(LUT) and tetrahedral interpolation method for the color space conversion between the device independent color space(CIEXYZ or Lab) and the device dependent color space(CMY) to reduce the color differences between the original copy and digital color proofs and the press sheets.