• 인터넷정보학회논문지
• /
• 제19권1호
• /
• pp.105-111
• /
• 2018

건축 구조물의 상대적인 변위 계측을 위하여 2메가 픽셀 Full HD(FHD) 해상도의 카메라와 디지털 영상상관(DIC, Digital Image Correlation) 플랫폼을 설계하고, 계측에 영향을 주는 영상 품질을 분석하였다. DIC 플랫폼은 Freescale사의 I.MX6를 기반으로 설계하였다. 영상 상관을 이용한 계측은 영상의 품질에 따라 계측 정밀도에 영향을 줄 수 있는데, 이러한 영상 품질 요인으로 영상의 밝기(brightness), 대조(contrast), 신호대 잡음비(SNR, Signal to Noise Ratio)를 분석하였다. 관심 영역(ROI, Region Of Interest)으로 설정한 부분에서 추출한 영상을 기준 영상으로 삼고, 일정 시간 경과 후 디지털 영상 상관(DIC)을 이용하여 기준 영상의 이동을 화소 및 부화소 단위로 추적 계산하여 변위를 측정하였다. 더불어 DIC 기반의 비접촉 원격 계측의 유효성을 파악하기 위하여 25m, 35m, 50m의 계측 거리에서, 영상 품질 요인 및 ROI 의 크기를 조정하여 측정을 하고 정밀도를 분석하였다.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.15-20
• /
• 2017

본 연구에서는 입자강화 복합재료의 파괴에너지와 변위장 특성에 대하여 분석하였다. 재료가 노출될 수 있는 온도인 상온, $-40^{\circ}C$와 $-60^{\circ}C$에서 쐐기쪼갬 시험을 수행하여 각 온도에 따른 재료의 파괴에너지를 산출하였다. 변위장과 변형률장은 DIC법을 활용하여 가시화 하였으며, 변위장은 DIC를 이용한 표시추적방법에 의해 측정하였다. 시험 결과, 온도가 낮아질수록 파괴에너지는 감소하였다. 표면 변위장은 상온과 $-40^{\circ}C$에서 유사하였고, $-60^{\circ}C$에선 입자강화 복합재료의 취성거동으로 인하여 크게 감소하였다. 변형률장에선 온도가 내려갈수록 전체적인 변형률범위가 감소하였다.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.727-736
• /
• 2017

The application of carbon fiber reinforced polymer (CFRP) in steel structures primarily includes two categories, i.e., the bond-critical application and the contact-critical application. Debonding failure and buckling failure are the main failure modes for these two applications. Conventional electrometric techniques may not provide precise results because of the limitations associated with single-point contact measurements. A nondestructive full-field measurement technique is a valuable alternative to conventional methods. In this study, the digital image correlation (DIC) technique was adopted to investigate the bond behavior and buckling behavior of CFRP-steel composite members. The CFRP-to-steel bonded joint and the CFRP-strengthened square hollow section (SHS) steel column were tested to verify the suitability of the DIC technique. The stereo-DIC technique was utilized to measure continuous deformation. The bond-slip relationship of the CFRP-to-steel interface was derived using the DIC data. Additionally, a multi-camera DIC system consisting of four stereo-DIC subsystems was proposed and applied to the compressive test of CFRP-strengthened SHS steel column. The precise buckling location and CFRP delamination of the CFRP-strengthened SHS steel column were identified. The experimental results confirm that the stereo-DIC technique can provide effective measurements for investigating the behaviors of CFRP-steel composite members.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1021-1026
• /
• 2016

본 연구는 점탄성을 가진 HTPB 입자강화 복합재료의 균열저항에 대하여 쐐기분열시험 및 균열선단열림각도를 이용하여 평가하였다. 일반적으로 균열진전 함수로서 균열선단열림각도는 파괴저항을 결정하기 위해 사용되며, 수치적으로 일정한 값을 가진다. 디지털 화상관련법은 임계 균열선단열림각도를 도출하기 위하여 균열선단열림변위 및 균열진전길이를 측정하기 위해 사용되었다. 본 연구의 시험 결과에서 입자강화 복합재료의 임계 균열선단열림각도는 균열초기 진전 후 일정한 값을 가진다. 임계 균열선단열림각도는 $50^{\circ}C$에서 $-40^{\circ}C$로 온도의 감소에 따라 증가한다. 이러한 임계 균열선단열림각도는 입자강화 복합재료의 파괴역학 파라미터로 사용될 수 있다.

• 한국임상약학회지
• /
• 제33권1호
• /
• pp.51-61
• /
• 2023

Background: Mobile applications (apps) on dietary supplements can increase consumers' access to information. However, it can lead to indiscriminate use of dietary supplements. This study aims to systematically review dietary supplement apps released in English and Korean and evaluate the quality of those apps. Methods: Through the app stores, apps on dietary supplements were systemically searched and examined. Two independent evaluators evaluated the apps and presented a mean score using the Mobile App Rating Scale (MARS). The correlation between MARS scores, user and evaluator ratings, and the number of secondary features of the apps were analyzed. Results: Of the 2,772 dietary supplement apps identified, 17 apps were included according to the selection criteria. The mean MARS score was 3.28 (standard deviation: 0.29) out of 5. Apps had higher scores in aesthetics and functionality dimensions, while engagement and information dimensions had lower scores. There was a positive correlation between the number of app downloads and information among MARS dimensions. The subjective evaluation also correlated with the information dimension. There was a positive correlation between the secondary features of the apps and MARS total score as well as the engagement dimension. Conclusion: The dietary supplement apps need to be managed at a higher level of quality to provide safe and reliable information to consumers. Especially, quality on information and engagement dimensions can be improved. Involvement of healthcare professionals in the app development, management with adequate referencing of information, and use of secondary features for enhanced user engagement can be helpful.

• Computers and Concrete
• /
• 제31권5호
• /
• pp.385-394
• /
• 2023

Displacement is an important element for evaluating the stability and failure mechanism of hydraulic structures. Digital image correlation (DIC) is a useful technique to measure a three-dimensional displacement field using two cameras without any contact with test material. The objective of this study is to evaluate the behavior of stacked geotextile tubes using the DIC technique. Geotextile tubes are stacked to build a small-scale temporary dam model to exclude water from a specific area. The horizontal and vertical displacements of four stacked geotextile tubes are monitored using a dual camera system according to the upstream water level. The geotextile tubes are prepared with two different fill materials. For each dam model, the interface layers between upper and lower geotextile tubes are either unreinforced or reinforced with a cementitious binder. The displacement of stacked geotextile tubes is measured to analyze the behavior of geotextile tubes. Experimental results show that as upstream water level increases, horizontal and vertical displacements at each layer of geotextile tubes initially increase with water level, and then remain almost constant until the subsequent water level. The displacement of stacked geotextile tubes depends on the type of fill material and interfacial reinforcement with a cementitious binder. Thus, the proposed DIC technique can be effectively used to evaluate the behavior of a hydraulic structure, which consists of geotextile tubes.

• 대한치과교정학회지
• /
• 제46권1호
• /
• pp.13-19
• /
• 2016

Objective: The aim of this study was to compare the accuracy of Bolton analysis obtained from digital models scanned with the Ortho Insight three-dimensional (3D) laser scanner system to those obtained from cone-beam computed tomography (CBCT) images and traditional plaster models. Methods: CBCT scans and plaster models were obtained from 50 patients. Plaster models were scanned using the Ortho Insight 3D laser scanner; Bolton ratios were calculated with its software. CBCT scans were imported and analyzed using AVIZO software. Plaster models were measured with a digital caliper. Data were analyzed with descriptive statistics and the intraclass correlation coefficient (ICC). Results: Anterior and overall Bolton ratios obtained by the three different modalities exhibited excellent agreement (> 0.970). The mean differences between the scanned digital models and physical models and between the CBCT images and scanned digital models for overall Bolton ratios were $0.41{\pm}0.305%$ and $0.45{\pm}0.456%$, respectively; for anterior Bolton ratios, $0.59{\pm}0.520%$ and $1.01{\pm}0.780%$, respectively. ICC results showed that intraexaminer error reliability was generally excellent (> 0.858 for all three diagnostic modalities), with < 1.45% discrepancy in the Bolton analysis. Conclusions: Laser scanned digital models are highly accurate compared to physical models and CBCT scans for assessing the spatial relationships of dental arches for orthodontic diagnosis.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2010년도 춘계학술대회
• /
• pp.137-144
• /
• 2010

DSLR 카메라를 이용하여 획득한 지상 디지털 영상자료는 지상 사진 측량, 공간모델링에 활용할 수 있다. 지상 디지털 영상에서 각 화소의 명암도는 영상을 결정하는 가장 중요한 매개변수(parameter)이다. 따라서 좀 더 명확한 명암도의 수치 자료를 획득하고 활용하기 위하여 디지털 카메라의 분광학적 특성과 파라미터를 추정해볼 필요가 있다. 본 연구에서는 Sony DSC-F828 DSLR 카메라로 연속촬영(프레임속도 0.38초)을 통하여 얻은 7장의 같은 디지털 컬러 사진으로부터 각각 RGB 밴드의 명암도 값을 추출하여 프레임 간 화소별 명암도 차이를 확인하고, 각 컬러 밴드에 대한 각 화소의 통계학적인 분석을 통하여 분광학적인 특성의 프레임별, 화소별, 밴드별 변화와 그에 따른 상관관계에 대하여 추정해 보는 것을 목적으로 한다.

• International Journal of Computer Science & Network Security
• /
• 제21권12spc호
• /
• pp.611-619
• /
• 2021

This article is devoted to the study of digital finance development in the global economy. The study aims to show the digital finance development level in different states and its impact on their economic development. In the course of the study, three hypotheses are put forward: 1) increased spending on innovation contributes to the competitiveness of financial services; 2) digital technology makes the financial systems of states more developed; 3) the development of digital finance contributes to the competitiveness at the level of states. Correlation and regression analysis are applied for building the empirical study. The results of the study helped to understand the digital finance concept. It also shows the main stages of digital finance development, the digitalization rank of the countries, the impact of digitalization on the financial and economic sphere. According to the results of empirical analysis, it is confirmed that the countries that invest more in innovative technologies are more developed. Therefore, digitalization has a significant value for the financial system and has a synergistic effect on all areas of the economy.