• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.483-492
• /
• 2015

This thesis analysis the CARBO 3000 that is one of a $CO_2$ infuser and improve its effectiveness. The thesis designs H/W and S/W that controls the $CO_2$ infusing mass compared to the CARBO 3000. Specially the designed H/W has a newly CPU, LCD, a flow velocity controller, a solenoid valve and a flow sensor. Also the designed S/W is composed of GUI and the algorithm to control the $CO_2$ infusing mass. The designed and implemented the $CO_2$ Infuser in this thesis is tested for the performance. The commercial measuring sensor is used for the test. The testing results say that the designed and implemented the $CO_2$ Infuser in this thesis is much more accurate compared to the CARBO 3000 on $CO_2$ infusing.

• Journal of Digital Contents Society
• /
• v.8 no.1
• /
• pp.17-25
• /
• 2007

Recently, the ubiquitous computing environment being able to connect all kinds of computing elements at anytime anywhere becomes widespread in human life. In this paper, we focus on a PC remote control system using cellular phones. Especially, we design and implement an mobile e-mail transmission system using PC remote control technique. By using our remote controller, cellular phone users can login into their own PC, and then send any file to others by e-mail attachment. To show the correct running of our system, real demonstration results are presented. We are sure that by opening our source code to the public our results can play an important role to encourage development of the various mobile remote control functionalities.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.503-508
• /
• 2019

In recent years, among the IoT products that are used in various ways in everyday life, motorized products are increasing. This study aims to develop a microcontroller unit that can easily control multiple motors and develop an application that makes use of this microcontroller unit. The basis of the hardware developed by the research was the Arduino board, and to it, the Bluetooth module, Zigbee module, and a motor driver were connected. To control the device, an application was designed. The final microcontroller unit and its application may be applied to electric curtains, electric blinds, robots, and other various IoT products. Further research will lead to hardware development that can control various types of motors other than stepping motors.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.138-143
• /
• 2006

This paper presents intelligent digital redesign method for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also, by using the bilinear and inverse bilinear approximation method, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs). Finally, a TS fuzzy model for the chaotic Lorentz system is used as an . example to guarantee the stability and effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1289-1295
• /
• 2007

In this paper, we implemented high-performance concurrent control system which manages whole RF systems with digital type and communicates with remote station on both wire and wireless networking. It consists of FPGA (Field Programmable Gate Array) part which controls forward/reverse LPA (Linear Power Amplifier), forward/reverse LNA (Low Noise Amplifier), channel cut wire/wireless TCP/IP, etc, master microprocessor (AVR), which manages the whole control system, Slave microprocessor which communicates SA (Spectrum Analyzer) and observes frequency spectrum of each channel with the resolution of 5KHz, 10 channel card microprocessor which independently observes each channel card and sets frequency synthesizer in channel cut and other peripherals and logics. The whole system is divided to two parts of H/W (hardware) and S/W (software) considering operational efficiency and concurrency, and implementation and cost. H/W consists of FPGA and microprocessor. We expected the optimized operation through H/W and SW co-design and hybrid H/W architecture.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.72-78
• /
• 2022

A vacuum brazed cooling passage for an aircraft engine controller was designed. In order to predict the total pressure loss, which is the main design factor of the cooling passage, theoretical and numerical methods for the major loss and the minor loss considering the overall shape of the cooling passage are presented. This design and evaluation method can predict the pressure loss of the complex cooling passage shape for various flow conditions at the initial design step.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.19-28
• /
• 1999

In order to control thermal deformation of the machine origin of machine tools a empirical model and a compensation system have been developed, Prior to empirical modeling the volumetric error considering shape errors and joint errors of slides is formulated through the homogeneous transformation matrix (HTM) and kinematic chain. Simulation results of the HTM method show that the thermal error of the machine origin is more critical than position-dependent errors. In order to make a stable and effective software error compensation system the GMDH (Group Method of Data Handling) models are constructed to estimate the thermal deformation of the machine origin by measuring deformation data and temperature data. A test bar and gap sensors are used to measure the deformation data. In order to compensate the estimated error the work origin shift method is developed by implementing a digital I/O interface board between a CNC controller and an IBM PC. The method shifts the work origin as much as the amounts which are calculated by the pre-established thermal error model. The experiment results for a vertical machining center show that the thermal deformation of the machine origin is reduced within $\pm$5$mu extrm{m}$.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.513-523
• /
• 2012

For precisely regulating the speed of a permanent magnet synchronous motor system with unknown load torque disturbance and disturbance inputs, an LMI-based sliding mode control scheme is proposed in this paper. After a brief review of the PMSM mathematical model, the sliding mode control law is designed in terms of linear matrix inequalities (LMIs). By adding an extended observer which estimates the unknown load torque, the proposed speed tracking controller can guarantee a good control performance. The stability of the proposed control system is proven through the reachability condition and an approximate method to implement the chattering reduction is also presented. The proposed control algorithm is implemented by using a digital signal processor (DSP) TMS320F28335. The simulation and experimental results verify that the proposed methodology achieves a more robust performance and a faster dynamic response than the conventional linear PI control method in the presence of PMSM parameter uncertainties and unknown external noises.