• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.40-46
• /
• 1985

Thermal diffusivities of zirconia samples partially or fully stabilized by MgO and $Y_2O_3$ were measured b laser-flash method up to 140$0^{\circ}C$ The values of thermal diffusivity decreased as the contents of MgO and $Y_2O_3$ increased due to the phonon scattering effect of defect structure of cubic phase formed. The temperature dependence of thermal diffusivity showed that the thermal diffusivity values decreased due to phono-phonon scattering as the temperature increased. The difference in thermal diffusivity was observed on cooling after heating up to 140$0^{\circ}C$ for magnesia stabi-lized zirconia samples but not for yttria stabilized zirconia samples.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.54-60
• /
• 2002

To obtain the breakthrough characteristics for the design of fixed bed adsorption plant, adsorption experiment on granular activated carbon was performed with tharonil in the fixed bed. The pore diffusivity and surface diffusivity of tharonil estimated by the concentration-time curve and adsorption isotherm were $D_s=2.825{\times}10^{-9}cm^2/s,\;D_p=1.26{\times}10^{-5}cm^2/s$, respectively. From comparison of the pore diffusivity and surface diffusivity, it was found that surface diffusion was controlling step for intrapaticle diffusion. The breakthrough curve predicted by constant pattern-linear driving force model were shown to agree with the experimental results. The surface diffusivity and film mass transfer coefficient had no effect on the theoretical breakthrough curve but the adsorption isotherm had fairly influence on it. Appearance time of breakthrough curve is faster with the increase flow rate and inflow concentration of liquid. The utility of granular activated carbon is enhanced with the increase of bed height and with the decrease of inflow rate.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.379-386
• /
• 2011

Durability of concrete is an important issue, and one of the most critical aspects affecting durability is chloride diffusivity. Factors such as water.cement ratio, degree of hydration, volume of the aggregates and their particle size distribution have a significant effect on chloride diffusivity in concrete. The use of polypropylene fibers(particularly very fine and well dispersed micro fibers) or mineral additives has been shown to cause a reduction in concrete's permeability. The main objective of this study is to evaluate the manner in which the inclusion of fiber(in terms of volume and size) and blast furnace slag(BFS) (in terms of volume replacement of cement) influence the chloride diffusivity in concrete by applying 3D computer modeling for the composite structure and performing a simulation of the chloride penetration. The modeled parameters, i.e. chloride diffusivity in concrete, are compared to the experimental data obtained in a parallel chloride migration test experiment with the same concrete mixtures. A good agreement of the same order is found between multi.scale microstructure model, and through this chloride diffusivity in concrete was predicted with results similar to those experimentally measured.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.79-84
• /
• 2005

The numerical solutions are examined on the effect of a centered heat conducting body on natural convection in a 2-D square cavity. The influences of the Rayleigh number, the dimensionless conducting body size, and the ratio of the thermal diffusivity of the body to that of the fluid have been investigated on the natural convection heat transfer in overall concerned region. The analysis reveals that the fluid flow and heat transfer processes are governed by all of them. Results for isotherms, vector plots and wall Nusselt numbers are reported for Pr = 0.71 and relatively wide ranges of the other parameters. Heat transfer across the cavity, in comparison to that in the absence of a body, are enhanced (reduced) in general by a body with a thermal diffusivity ratio less (greater) than unity. The heat transfer are also found to attain a minimum as the body size is increased.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.17-24
• /
• 1994

The evaluation and analysis of diffusivity of lithium for coarsening and coarsening kinetics of ${\delta}^{\prime}$ precipitate in Al-Li-Cu-Mg-Zr alloy aged at $170^{\circ}C$ have been investigated by transmission electron microscopy. With ageing time, ${\delta}^{\prime}$ precipitate coaesened to followed $\bar{\gamma}{\propto}t^{1/3}$ and coarsening kinetics was found to be obeyed to the Lifshitz-Slyozov-Wagner(LSW) theory and diffusivity of lithium for coarsening of ${\delta}^{\prime}$ precipitate in Al-Li-Cu-Mg-Zr alloy was obtained to be $5.85{\times}10^{-17}{\sim}1.53{\times}10^{-16}$ by experimental coarsening rate constant and various coarsening kinetic theory. Diffusivity of lithium measured by using various model but MLSW and Tsumuraya (VI) et al. model in Al-Li-Cu-Mg-Zr alloy is similar to that calculated by the Costas's diffusivity equation. It was, therefore, suggested that additing to the Cu, Mg and Zr element in Al-Li system have no great effect on diiffusivity of lithium for coarsening of ${\delta}^{\prime}$ This suggest that in matrix.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.723-729
• /
• 2015

고성능액체크로마토그래피(high-performance liquid chromatography, HPLC)에서 C18(octadecyl silica, ODS) 칼럼에서 고리형 아데노신 일인산(cyclic adenosine monophosphate, cAMP)의 크로마토그램을 얻은 후, 모멘트 분석을 수행하였다. 일반속도 모델(general rate model, GR model)을 기반으로 first absolute moment와 second central moment를 계산하였다. 모멘트 분석의 중요한 세 가지 계수인 분자확산계수(molecular diffusivity, $D_m$), 외부물질전달계수(external mass transfer coefficient, $k_f$), 입자내부확산계수(intra-particle diffusivity, $D_e$)는 각각 Wilke-Chang 식, Wilson-Geankoplis 식을 이용하고 이론단수(theoretical plate number) 식과 van Deemter 식을 비교하여 계산하였다. 실험은 각각 세 가지의 이동상 조성, 용질 농도, 유량 조건에서 수행하였다. Van Deemter 그래프를 그려 모멘트 분석결과를 정성적으로 정리했으며, 이론단 상당높이(height equivalent to a theoretical plate, HETP, $H_{total}$)에 $H_{ax}$, $H_f$, $H_d$가 미치는 영향을 알아보기 위해 van Deemter coefficient를 비교했다. HETP에 가장 큰 영향을 주는 요인은 입자내부확산($H_d$)이었으며 외부물질 전달($H_f$)는 그 영향이 매우 작았다.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.451-456
• /
• 2009

We carried out this experiment to observe an electrochemical properties for LB films of alkyl compounds by the cyclic voltammetry. Alkyl bromides was deposited by using the Langmuir- Blodgett method on the ITO glass. We measured to an electrochemical measurement by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in 0.5, 1.0, 1.5 and 2.0 N $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV. The scan rate were 100 mV/s. As a result, an electrochemical properties of the LB films of alkyl bromides appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl compounds amount.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.202-207
• /
• 2010

We investigated the electrochemical properties for Langmuir-Blodgett(LB) films mixed with l-bromotetradecane(Cl4), l-bromohexadecane(Cl6), and l-bromooctadecane(Cl8). The alkyl bromides mixture was deposited by using the Langmuir-Blodgett method on the ITO glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, 1.5 and 2.0 N) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 m V, continuously oxidized to 1650 mV. The scan rate was 100 mV/s. As a result, LB films of Cl4, Cl6, and Cl8 mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl bromides amount.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1151-1158
• /
• 2013

습기 수착 물성은 전자 패키징 장치의 신뢰성에 있어서 층간의 수증기 압력에 의해 공정과정 동안 발생되는 박리 불량의 고장 분석 및 최적의 재료 개발에 있어서 필수적이다. 본 논문에서는 온습도 모델에 따른 전자 패키징 재료의 온도 의존적인 흡습 및 탈습 물성을 변수화 하였고 이에 대한 온도 및 습도의 영향에 대해 고찰하였다. 변수화된 확산성에서 얻어진 확산 활성화 에너지는 등가의 습기 수착 수준을 위한 가속 수명 비율을 결정하고 신뢰 수명 평가에 요구되는 등가의 소요 시험 시간에 미치는 습기 확산성의 영향을 예측할 수 있게 한다. 신뢰성 시험 표준에서 평가된 유연 전자 모듈의 가속 수명비율을 예시하였다.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.112-117
• /
• 1998

TiN을 Cu의 확산방지막으로 사용하기 위해 많은 연구가 되어왔는데, 이 연구에서는 특히 X-ray photoelectron spectroscopy(XPS)를 이용하여 TiN박막에서의 Cu의 확산현상을 연구하였다. TiN박막은 일반적으로 columnar grain을 형성하면서 성장을 하는데, 녹는점의 1/3에 해당하는 비교적 낮은 온도에서는 grain들의 경계를 따라 Cu가 확산함을 확인하였다. Atomic force microscopy(AFM)를 이용하여 grain의 모양을 관찰하였고, 이 grain boundary 를 통한 확산 현상을 연구하기 위하여, modified surface accumulation method를 이용하였 다. 연구 결과, TiN박막에서의 Cu의 grain boundary diffusion의 활성화 에너지 $Q_b$는 0.23 eV, Diffusivity $D_{bo}$는 $5.5\times10^{-12{\textrm{cm}^2$/sec의 값을 얻었다.