• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.133-145
• /
• 2020

This study utilized nano-liposomes for the purpose of stabilizing and increasing the solubility of biotin, a water-soluble active material with low solubility. The particle size, zeta potential, and polydispersity index were confirmed with a nano zetasizer. It was possible to manufacture nano liposomes at 100 to 250 nm of particle size and -80 to -30 mV of zeta potential. Dialysis membrane method (DMM) was used to measure the capsulation efficiency of biotin in biotin nano-liposomes, and results showed that pH increased biotin nano-liposomes had higher capsulation efficiency than normal biotin nano-liposome. Through this experiment, it was confirmed that the pH has a great influence on the stability of biotin nano-liposomes. In vitro franz diffusion cell method was used to measure in vitro skin absorption rate of biotin nano-liposomes. The shape of the formulation and biotin solubility in nano-liposome was observed by cryogenic transmission electron microscopy (cryo-TEM). Through this study, we confirmed that biotin, which is introduced as closely related to hair health, can be incorporated into a nano-liposome drug delivery system, to make biotin nano-liposome with improved solubility and precipitation problems.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.2
• /
• pp.95-101
• /
• 2005

In the heart, $Na^{+}-Ca^{2+}$ exchange (NCX) is the major $Ca^{2+}$ extrusion mechanism. NCX has been considered as a relaxation mechanism, as it reduces global $[Ca^{2+}]_i$ raised during activation. However, if NCX locates in the close proximity to the ryanodine receptor, then NCX would curtail $Ca^{2+}$ before its diffusion to global $Ca^{2+}_i$ This will result in a global $[Ca^{2+}]_i$ decrease especially during its ascending phase rather than descending phase. Therefore, NCX would decrease the myocardial contractility rather than inducing relaxation in the heart. This possibility was examined in this study by comparing NCX-induced extrusion of $Ca^{2+}$ after its release from SR in the presence and absence of global $Ca^{2+}_i$ transient in the isolated single rat ventricular myocytes by using patch-clamp technique in a whole-cell configuration. Global $Ca^{2+}_i$ transient was controlled by an internal dialysis with different concentrations of BAPTA added in the pipette. During stimulation with a ramp pulse from +100 mV to -100 mV for 200 ms, global $Ca^{2+}_i$ transient was suppressed only mildly, and completely at 1 mmol/L, and 10 mmol/L BAPTA, respectively. In these situations, ryanodine-sensitive inward NCX current was compared using $100{\mu}mol/L$ ryanodine, $Na^+$ depletion, 5 mmol/L $NaCl_2$ and $1{\mu}mol/L$ nifedipine. Surprisingly, the result showed that the ryanodine-sensitive inward NCX current was well preserved after 10 mmol/L BAPTA to 91 % of that obtained after 1 mmol/L BAPTA. From this result, it is concluded that most of the NCX-induced $Ca^{2+}$ extrusion occurs before the $Ca^{2+}$ diffuses to global $Ca^{2+})i$ in the rat ventricular myocyte.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.265-269
• /
• 2007

Fucoidan from sea tangle (Laminaria japonica) was isolated by hot water extraction, and partially purified. The in-vitro glucose and bile acid retarding effects of the partially purified fucoidan were investigated. Fucoidan exhibited 27.06$\sim$21.42% of retarding index for glucose and 33.50$\sim$27.02% of retarding index for bile acid during in vitro dialysis experiment for 2 hours. These retarding effects on glucose and bile acid diffusion was considered as a relatively good or very good, suggesting the prevention from diabetes and arteriosclerosis of some extent.

• Archives of Pharmacal Research
• /
• v.27 no.5
• /
• pp.562-569
• /
• 2004

Self-assembling nanospheres of hydrophobized pullulan have been developed. Pullulan acetate (PA), as hydrophobized pullulan, was synthesized by acetylation. Carboxymethylated poly(ethylene-glycol) (CMPEG) was introduced into pullulan acetate (PA) through a coupling reaction using N, N'-dicyclohexyl carbodiimide (DCC). A synthesized PA-PEG-PA (abbreviated as PEP) conjugate was confirmed by Fourier transform-infrared (FT-IR) spectroscopy. Since PEP conjugates have amphiphilic characteristics in aqueous solution, polymeric nanoparticles of PEP conjugates were prepared using a simple dialysis method in water. From the analysis of fluorescence excitation spectra primarily, the critical association concentration (CAC) of this conjugate was found to be 0.0063 g/L. Observations by scanning electron microscopy (SEM) showed the spherical morphologies of the PEP nanoparticles. The particle size distribution of the PEP conjugates was determined using photon correlation spectroscopy (PCS) and the intensity-average particle size was 193.3 ${\pm}$ 13.53 nm with a unimodal distribution. Clonazepam (CNZ), as a model drug, was easy to entrap into polymeric nanoparticles of the PEP conjugates. The drug release behavior was mainly diffusion controlled from the core portion.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.4
• /
• pp.319-322
• /
• 2003

Many studies have been attempted to overcome the problems of paclitaxel related to the extremely low aqueous solubility of paclitaxel and the unexpected side-effects caused by $Cremophor^{\circledR}$ EL in a commercial paclitaxel formulation, $Taxol^{\circledR}$. In order to formulate a new delivery system suitable for intravenous administration without toxic excipients, in this study, paclitaxel was incorporated into solid lipid nanoparticles (Px-SLN) by hot homogenization technique using a microfluidizer. Particle size and zeta potential were measured by a Zetasizer. In vitro drug release experiment was performed by a dialysis diffusion method. Each Px-SLN or $Taxol^{\circledR}$ was intravenously administered to the male Sprague-Dawley rats at a dose of 5 mg/kg as paclitaxel. Blood samples were deproteinated with acetonitrile and assayed for paclitaxel by the validated HPLC/MS/MS method. Mean particle size and zeta potential were measured as 72.1 nm (< Polydispersity 0.3) and -41.5 mV, respectively. The content of paclitaxel in SLN was 1.42 mg/ml and the drug loading efficiency was $71.2{\pm}4.3%$. The $AUC_t$ of Px-SLN was 3.4-fold greater than that of $Taxol^{\circledR}$. The Px-SLN might be a promising candidate for an alternative formulation for the parenteral delivery of paclitaxel.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.59-63
• /
• 2009

Soybean phosphatidylcholine microparticles loaded with cyclosporin A (CsA) were prepared by the modified emulsion solvent diffusion and ionic gelation method, in which chitosan on the surface of the microparticles was crosslinked with various concentrations of tripolyphosphate (TPP). The morphology of the particles was characterized by scanning electron microscopy (SEM). The change of particle size and zeta-potential by chitosan on the surface of the lipid microparticles were systematically observed. The encapsulation efficiency and loading capacity of CsA in the particles were determined by high performance liquid chromatography (HPLC). In vitro release kinetics was studied using the dialysis method. In the results, the mean particle size and the zeta-potential of lipid microparticles increased when the attached chitosan was cross-linked (from 2.5 to 6.2 ${\mu}m$ and from -37.0 to +93.0 mV, respectively). The cyclosporin A-loaded lipid microparticles appeared discrete and spherical particles with smooth surfaces. The encapsulation efficiency of CsA was between 79% and 90% while the loading capacity was between 41% and 56%. In vitro release study showed that the crosslinkage of chitosan by TPP significantly delayed the release of CsA from the particles in a concentration-dependent manner. Thus, the release of CsA from the lipid microparticles could be controlled by tripolyphosphate used as a cross-linking agent.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.5
• /
• pp.359-366
• /
• 2009

In this study, paclitaxel-loaded lipid nanosuspension (PxLN) was prepared and the in vivo profiles after intravenous administration in rats were investigated. We compared the manufacturing processes depending on the temperature: PxLN-H for a hot homogenization process and PxLN-C for solidification of lipid-drug mixtures by liquid nitrogen. Both formulations showed submicron size distribution and the similar drug loading efficiency of about 70%. In vitro release of PxLNs and Taxol$^{(R)}$ performed by a dialysis diffusion method showed similar pattern for PxLN-H and Taxol$^{(R)}$, but the reduced release profile for PxLN-C. PxLN or Taxol$^{(R)}$ was intravenously administered to the rats at a dose of 5 mg/kg as paclitaxel. The drug in blood samples were assayed by the HPLC/MS/MS method. The AUC$_t$ of PxLN-H was 3.4-fold greater than that of Taxol$^{(R)}$. PxLN-H gave higher biodistribution in all tissues than did Taxol$^{(R)}$. In addition, it maintained the higher drug concentration for 12 h. This lipid nanosuspension might be a promising candidate for an alternative formulation for the parenteral delivery of poorly water-soluble paclitaxel.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.167-176
• /
• 2013

A novel bioactive molecule produced by Bacillus thuringiensis subsp. kurstaki Bn1 (Bt-Bn1), isolated from a common pest of hazelnut, Balaninus nucum L. (Coleoptera: Curculionidae), was determined, purified, and characterized in this study. The Bt-Bn1 strain was investigated for antibacterial activity with an agar spot assay and well diffusion assay against B. cereus, B. weinhenstephenensis, L. monocytogenes, P. savastanoi, P. syringae, P. lemoignei, and many other B. thuringiensis strains. The production of bioactive molecule was determined at the early logarithmic phase in the growth cycle of strain Bt-Bn1 and its production continued until the beginning of the stationary phase. The mode of action of this molecule displayed bacteriocidal or bacteriolytic effect depending on the concentration. The bioactive molecule was purified 78-fold from the bacteria supernatant with ammonium sulfate precipitation, dialysis, ultrafiltration, gel filtration chromatography, and HPLC, respectively. The molecular mass of this molecule was estimated via SDS-PAGE and confirmed by the ESI-TOFMS as 3,139 Da. The bioactive molecule was also determined to be a heat-stable, pH-stable (range 6-8), and proteinase K sensitive antibacterial peptide, similar to bacteriocins. Based on all characteristics determined in this study, the purified bacteriocin was named as thuricin Bn1 because of the similarities to the previously identified thuricin-like bacteriocin produced by the various B. thuringiensis strains. Plasmid elution studies showed that gene responsible for the production of thuricin Bn1 is located on the chromosome of Bt-Bn1. Therefore, it is a novel bacteriocin and the first recorded one produced by an insect originated bacterium. It has potential usage for the control of many different pathogenic and spoilage bacteria in the food industry, agriculture, and various other areas.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.467-475
• /
• 2001

A triblock copolymer based on $poly(\varepsilon-caprolactone)$ (PCL) as the hydrophobic part and poly(ethylene glycol) (PEG) as the hydrophilic portion was synthesized by a ring-opening mechanism of ${\varepsilon}-caprolactone$ with PEG containing a hydroxyl group at bot h ends as an initiator. The synthesized block copolymers of PCL/PEG/PCL (CEC) were confirmed and characterized using various analysis equipment such as 1H NMR, DSC, FT-IR, and WAXD. Core-shell type nanoparticles of CEC triblock copolymers were prepared using a dialysis technique to estimate their potential as a colloidal drug carrier using a hydrophobic drug. From the results of particle size analysis and transmission electron microscopy, the particle size of CEC core-shell type nanoparticles was determined to be about 20-60 nm with a spherical shape. Since CEC block copolymer nanoparticles have a core-shell type micellar structure and small particle size similar to polymeric micelles, CEC block copolymer can self-associate at certain concentrations and the critical association concentration (CAC) was able to be determined by fluorescence probe techniques. The CAC values of the CEC block copolymers were dependent on the PCL block length. In addition, drug loading contents were dependent on the PCL block length: the larger the PCL block length, the higher the drug loading content. Drug release from CEC core-shell type nanoparticles showed an initial burst release for the first 12 hrs followed by pseudo-zero order release kinetics for 2 or 3 days. CEC-2 block copolymer core-shell type nanoparticles were degraded very slowly, suggesting that the drug release kinetics were governed by a diffusion mechanism rather than a degradation mechanism irrelevant to the CEC block copolymer composition.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.173-182
• /
• 2010

A fiber fraction (Aloe cellulose), the by-product obtained from Aloe vera gel processing was freeze dried and investigated for in vitro glucose/ bile acid retarding effects of powdered sample (100 mesh) comparing with commercial $\alpha$-cellulose as a reference sample. We also examined the effectiveness of physiological functionality such as the antiobesity and anti-constipation on Sprague-Dawley (SD) rat. The Aloe cellulose powders during in vitro dialysis experiment for 2 hours exhibited the glucose and bile acid retarding index of 20.32-35.2% and 53.13-28.30%, respectively. Especially, freeze dried aloe cellulose showed the 2.5 and 1.2-6 times higher effect on in vitro glucose and bile acid retardation than those of $\alpha$-cellulose. These relatively good retarding effects on glucose and bile acid diffusion suggest a potential of preventing from diabetes and arteriosclerosis of some extent. Also, the results from animal experiments on SD rats fed a high-fat diet for 4 weeks suggested that Aloe cellulose might be used as a novel dietary fiber showing an effective anti-obesity and anti-constipation effect.