• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_4호
• /
• pp.173-179
• /
• 2001

The chemical behavior and properties of the redox state of environmental pollutants was investigated using electrochemical methods. The purpose was to measure the variations in the redox reaction of differential pulse polarograms and cyclic voltammograms. The results observed the influences on redox potential and current of various factors including concentration, temperature, salt, and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from reversible to irreversible processes. Also, it was mixing with reaction current controlled.

• 한국대기환경학회지
• /
• 제6권2호
• /
• pp.161-167
• /
• 1990

The reaction of sulfur dioxide with cupric oxide supported on zeolite was investigated over a temperature range of $250{\sim}450^{{\circ}C$. After the completion of the $SO_2$ removal reaction, the cupric sulfate produced was regenerated to copper by hydrogen or LPG. The experimental results showed that the removal efficiency of $SO_2$ was improved with temperature increase and with $SO_2$ inlet concentration decrease. The reaction of $SO_2$ with CuO/Zeolite was well explained by the shrinking unreacted core model using first order chemical reaction control and diffusion control. THe reaction rate constant and the effective diffusivity were respectively as follows: 1k (cm/s) = 2.519 exp[-10991 (cal/mol)/RT] $De(cm^2/s) = 2.06 \times 10^{-5} exp[-8380 (cal/mol)/RT]$

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.131-137
• /
• 2002

The chemical behavior and properties on the redox state of environmental pollutant has been investigated by electrochemical methods. We carried out to measure the variations in the redox reaction of differential pulse polarogram and cyclic voltammogram. The results observed the influences on redox potential and current of various factors with temperature and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from qusi-reversible to irreversible processes. Also, it was mixing with reaction current controlled. The bits-phenol A in the waste water was made to compound with cobalt ion and it take away from the separation into compound. The $Co(BPA)_2$ compound was not found to be dissociation in waste water. However, this compound is avery unstable(K=1.02) and for a while, it was to be a dissociation. Therefore, we believed that it was likely to a toxic substance.

• 폴리머
• /
• 제24권1호
• /
• pp.105-112
• /
• 2000

본 연구에서는 항공기 구조용 재료로 쓰이는 탄소섬유/에폭시 복합재료 프리프레그(DMS 2224)를 모델시스템으로 하여 등온환경과 등속도 가열환경에서 경화반응 속도를 연구하였다. 이 복합재료의 공정온도에서의 가공공정을 묘사할 수 있는 현상학적인 반응속도 모델을 differential scanning calorimetry (DSC)와 이론을 통하여 제안하였다. 등온환경에서의 실험으로부터 반응특성곡선을 관찰한 결과 경화반응이 1차 반응함수임을 확인하였고, 활성화 에너지는 78.43 kJ/mo1을 얻었다. 이 프리프레그는 경화온도에 따라 한계경화도를 보여주어 유리화가 존재함을 확인하였고 이를 1차 반응속도 모델에 적용시킨 결과, 유리화 이후의 확산우세현상을 포함한 반응속도 모델을 제안하였다. 제안된 모델식을 이용하여 등온/등속도 가열환경을 포함한 실제 경화공정을 성공적으로 표현할 수 있었다.

• Advances in Traditional Medicine
• /
• 제7권1호
• /
• pp.79-84
• /
• 2007

Urease was immobilized with calcium alginate by entrapment method in the form of spherical beads and stored in Tris/acetate buffer (pH 7.3) at $4^{\circ}C$. Urease immobilized at different concentration of alginate beads (3%, 4% and 5%) showed higher apparent $K_{m}$ values than the soluble urease. Furthermore, $K_{m}$ has been shown to be corelated with effective diffusion coefficient (De) at different concentration of alginate gel. The present study showed that diffusion and reaction contribute to control the overall rate.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.603-608
• /
• 2017

$Si_3N_4$와 Ti 또는 TiAl 합금을 $900^{\circ}C$에서 확산쌍을 제조하여 분석하고, 확산층의 분석을 통하여 생성된 층마다의 조성을 분석하여 각 원소들의 확산 경로 및 속도를 비교 하였다. $Si_3N_4/Ti$의 확산 쌍의 확산 경로는 $Si_3N_4/Ti_5Si_3+TiN/TiN/Ti$로 나타났고, Ti 측면에서 TiN층이 생성 되었음으로 N의 확산 속도가 Si 보다 빠름을 알 수 있었다. $Si_3N_4/TiAl$ 합금의 확산쌍은 $Si_3N_4/Ti$ 사이의 확산쌍과는 다르게 Si, N, Ti, Al 의 각 원소 마다의 확산 속도 차이로 인하여 확산 경로는 $Si_3N_4/TiN(Al)/Ti_3Al/TiAl$ 상으로 나타났다. 상태도를 통하여 생성된 확산쌍의 확산경로를 파악한 결과, 확산경로의 요구사항을 모두 만족하였다. $Si_3N_4/Ti$ 확산에서 Ti를 이용한 적분확산 계수는 $Ti_5Si_3$, TiN에서 $2.18{\times}10^{-16}m^2/sec$, $2.19{\times}10^{-16}m^2/sec$, $Si_3N_4/TiAl$ 확산 쌍에서 Ti를 이용한 적분확산 계수는 각각 TiN(Al) 상에서 $2.88{\times}10^{-16}m^2/sec$, $Ti_3Al$ 상에서 $1.48{\times}10^{-15}m^2/sec$으로 나타났다. 본 연구는 $Si_3N_4$와 Ti 및 TiAl의 계면 반응을 분석한 결과로서 $Si_3N_4$ 상을 이용한 확산반응의 기초자료로 사용될 수 있을 것으로 사료된다.

• Nonlinear Functional Analysis and Applications
• /
• 제28권3호
• /
• pp.659-670
• /
• 2023

In this paper, we study the distributed optimal control problem of a coupled system of the host-pathogen model. The system consists of the density of the susceptible host, the density of the infected host, and the density of pathogen particles. Our main goal is to minimize the infected density and also to decrease the cost of the drugs administered. First, we prove the existence and uniqueness of solutions for the proposed problem. Then, the existence of the optimal control is established and necessary optimality conditions are also derived.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.655-661
• /
• 1999

${\beta}$-SiC formation mechanism in Si melt-C-SiC system with varying in size of carbon source was investigated. A continuous reaction sintering process using Si melt infiltration method was adopted to control the reaction sintering time effectively. It was found that ${\beta}$-SiC formation mechanism in Si melt-C-SiC system was directly affected by the size of carbon source. In the Si melt-C-SiC system with large carbon source ${\beta}$-SiC formation mechanism could be divided into two stages depending on the reaction sintering time: in early stage of reaction sintering carbon dissolution in Si melt and precipitation of ${\beta}$-SiC was occurred preferentially and then SIC nucleation and growth was controlled by diffusion of carbon throughy the ${\beta}$-SiC layer formed on graphite particle. Furthmore a dissolution rate of graphite particles in Si melt could be accelerated by the infiltration of Si melt through basal plane of graphite crystalline.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.385-397
• /
• 2016

Scaffolds are essential in bone tissue engineering, as they provide support to cells and growth factors necessary to regenerate tissue. In addition, they meet the mechanical function of the bone while it regenerates. Currently, the multiple methods for designing and manufacturing scaffolds are based on regular structures from a unit cell that repeats in a given domain. However, these methods do not resemble the actual structure of the trabecular bone which may work against osseous tissue regeneration. To explore the design of porous structures with similar mechanical properties to native bone, a geometric generation scheme from a reaction-diffusion model and its manufacturing via a material jetting system is proposed. This article presents the methodology used, the geometric characteristics and the modulus of elasticity of the scaffolds designed and manufactured. The method proposed shows its potential to generate structures that allow to control the basic scaffold properties for bone tissue engineering such as the width of the channels and porosity. The mechanical properties of our scaffolds are similar to trabecular tissue present in vertebrae and tibia bones. Tests on the manufactured scaffolds show that it is necessary to consider the orientation of the object relative to the printing system because the channel geometry, mechanical properties and roughness are heavily influenced by the position of the surface analyzed with respect to the printing axis. A possible line for future work may be the establishment of a set of guidelines to consider the effects of manufacturing processes in designing stages.

• 한국대기환경학회지
• /
• 제12권5호
• /
• pp.577-585
• /
• 1996

A screening study was performed in order to resolve the flow, combustion and emission characteristics of the gas furmace with co-axial diffusion flane burner. A control-valume based finite-difference method with the power-law scheme was employed for discretization. Numerical procedure for the differential equation was used by SIMPLEST to enclosute rapid converge. A k-.varepsilon. model was incorporated for the closure of turbulence. The mass fraction and mixture fraction were calculated by cinserved scalar method. An equilibrium analysis was employed to determine the concentration of radicals in the product stream and conserbation equations were them solved for N amd NO by Zelovich reaction scheme. The method was exercised in a simple one-dimensional case first, to determine the effects of air ratio, temperature and residence time on NO formation and applied to a furnace with co-axial diffusion flame burner.