• ETRI Journal
• /
• 제42권6호
• /
• pp.827-836
• /
• 2020

Measuring the diffraction loss for high frequencies, long distances, and large diffraction angles is difficult because of the high path loss. Securing a well-controlled environment to avoid reflected waves also makes long-range diffraction measurements challenging. Thus, the prediction of diffraction loss at millimeter-wave frequency bands relies on theoretical models, such as the knife-edge diffraction (KED) and geometrical theory of diffraction (GTD) models; however, these models produce different diffraction losses even under the same environment. Our observations revealed that the KED model underestimated the diffraction loss in a large Fresnel-Kirchhoff diffraction parameter environment. We collected power-delay profiles when millimeter waves propagated over a building rooftop at millimeter-wave frequency bands and calculated the diffraction losses from the measurements while eliminating the multipath effects. Comparisons between the measurements and the KED and GTD diffraction-loss models are shown. Based on the measurements, an approximation model is also proposed that provides a simple method for calculating the diffraction loss using geometrical parameters.

• Applied Microscopy
• /
• 제32권2호
• /
• pp.81-90
• /
• 2002

회절 현상의 기초가 되는 호이겐스 원리로부터 키르히호프 공식을 유도하고 이어 이를 응용한 프레넬 회절과 프라운호퍼 회절에 대한 수학적인 도출을 소개하였다. 프레넬 회절은 후에 CTEM 영상 이론에 기반이 되고 프라운호퍼 회절은 수학적으로 Fourier 변환을 나타내어 전자회절 패턴이론과 HRTEM 영상이론에 기반을 이루게 된다. 다른 각도에서 개발된 Born 시리즈에 의한 산란 현상에 관한 이론도 소개하였다. 본회에서 소개된 이론은 후에 소개될 이론의 기반이 되면서 자주 사용되므로 일반물리학에서 많이 소개되고 있는 회절 현상에 대하여 이 기회에 이론적인 실력을 단단히 쌓았으면 한다.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.121-127
• /
• 2004

Arrayed waveguide grating의 스펙트럼을 해석하기 위해 Fresnel Kirchhoff diffraction 식과 Fraunhofer diffraction 근사식을 이용하여 실제로 제작되는 16채널 및 40채널의 arrayed waveguide grating에 대해 적용해 보았으며 Fraunhofer diffraction 근사식을 적용할 때 생기는 문제점을 모델별로 도출하였고 그 오차를 실제의 공정오차와 비교하였다.

• 한국레이저가공학회지
• /
• 제15권2호
• /
• pp.6-10
• /
• 2012

We fabricated the diffraction grating on the surface of fused silica glass using a femtosecond laser. The grooves of diffraction grating has a lot of micro crack and debris result in reduced diffraction efficiency. So, we polished the diffraction grating with $CO_2$ laser beam. With different scan number of $CO_2$ laser beam, we observed the image of diffraction grating and measured the diffraction efficiency.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1175-1182
• /
• 2000

Diffraction systematically causes error in acoustic measurements. Most probes are designed to reduce this phenomenon. On the contrary, this paper proposes a spherical probe a] lowing acoustic inten sity measurements in three dimensions to be made, which creates a diffracted field that is well-defined, thanks to analytic solution of diffraction phenomena. Six microphones are distributed on the surface of the sphere along three rectangular axes. Its measurement technique is not based on finite difference approximation, as is the case for the ID probe but on the analytic solution of diffraction phenomena. In fact, the success of sound source identification depends on the inverse models used to estimate inverse diffraction phenomena, which has nonlinear properties. In this paper, we propose the concept of nonlinear inverse diffraction modeling using a neural network and the idea of 3 dimensional sound source identification with better performances. A number of computer simulations are carried out in order to demonstrate the diffraction phenomena under various angles. Simulations for the inverse modeling of diffraction phenomena have been successfully conducted in showing the superiority of the neural network.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.85-93
• /
• 1996

The far-zone scattered field patterns of a hyperbolic reflector antenna are analyzed by using uniform geometrical theory of diffraction(UTD). The main objective of this paper is to obtain the higher order diffraction contributions which provide the continuity over the shadow boundaries of the first order solution. to obtain the scattered magnetic field characteristics, the scattered field components of the secodn-order diffraction, diffraction-reflection, diffraction-reflection-diffraction terms are added to the result of the previous research. The results of the present research are compared to those of the first order solution and the method of moments. One can observe the improvemtn of the current approach over the first order solution. also, the results of the present method agree very well with those of the moment methods especially in the transition regions near the first order diffraction shadow boundaries.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.18-26
• /
• 2010

Diffraction gratings with precise spatial periods of 2 ${\mu}m$ and 5 ${\mu}m$ have been fabricated by using a femtosecond laser which does not have limits on materials of micromachining and small thermal effects due to high peak power. Diffraction angle and diffraction efficiency of those were measured. Simulation results of diffraction angle and diffraction efficiency of the diffraction grating calculated with the parameters such as line width, depth, and spatial period of the fabricated gratings were compared with experimental results measured with a He-Ne laser. Besides these, Fresnel Zone Plates (FZPs) with focal distances of 50 mm and 25 mm were fabricated and focal distances of fabricated FZP were measured. Those experimental results for diffraction gratings and FZPs match well with experimental results.

• Tribology and Lubricants
• /
• 제19권1호
• /
• pp.1-8
• /
• 2003

Recently, PM-high speed steel(PM-HSS) has reportedly been a good alternative material for rolling mill because of its superior performance to conventional HSS. This paper has been aimed to investigate the possibility for application to rolling contact element for PM-HSS by X-ray diffraction technique. The X-ray elastic constant for PH-HSS has been found by X-ray diffraction during the four-point bending test. Residual stress and half-value breadth on the contact surface during rolling contact fatigue process by X-ray diffraction have also been measured. The result of this study shows that the application of X-ray diffraction technique to PM-HSS could be as possible alternative material as conventional HSS. Half-value breadth on rolling contact surface by X-ray diffraction is not changed during rolling contact fatigue process. On the other hand, the residual stress is changed. This suggests that dislocation reaction has been hardly occurred in rolling contact, depending on super-saturated carbon in PM-HSS.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.233-244
• /
• 2016

Tension Leg Platform (TLP) is a floating structure that consists of four columns with large diameter. The diffraction theory is used to calculate the wave force of floating structures with large dimensions (TLP). In this study, the diffraction and Froude-Krylov wave forces of TLP for surge, sway and heave motions and wave force moment for roll, pitch degrees of freedom in different wave periods and three wave approach angles have been investigated. From the numerical results, it can be concluded that the wave force for different wave approach angle is different. There are some humps and hollows in the curve of wave forces and moment in different wave periods (different wavelengths). When wave incidents with angle 0 degree, the moment of diffraction force for pitch in high wave periods (low frequencies) is dominant. The diffraction force for heave in low wave periods (high wave frequencies) is dominant. The phase difference between Froude-Krylov and diffraction forces is important to obtain total wave force.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.50-58
• /
• 2002

Residual stress is generated in the structures as a result of irregular elastic-plastic deformation during fabrication processes such as welding, heat treatment, and mechanical processing. There are several factors attributed to the origin of residual stresses, tensile or compressive. The stresses can be determined by destructive ways or nondestructive ways using X-ray or neutron diffraction. Although X-ray diffraction is a well established technique, it is practically limited to near-surface stresses. Neutrons penetrate easily into most materials and neutron diffraction permits non-destructive evaluation of lattice strain within the bulk of large specimens because the radiation is more deeply penetrating for metallic engineering components. This paper presented application of neutron diffraction technique to the residual stress measurement using 20 mm thick welded stainless steel plate($100{\times}100 \textrm{mm}^2$)