• Korean Journal of Hydrosciences
• /
• v.6
• /
• pp.39-49
• /
• 1995

The surface hydrology of large land areas is susceptible to several preferred stable states with transitions between stable states induced by stochastic fluctuation. This comes about due to the close couping of land surface and atmospheric interaction. An interesting and important issue is the duration of residence in each mode. Mean transition times between the stable modes are analyzed for different model parameters or climatic types. In an example situation of this differential equation exhibits a bimodal probability distribution of soil moisture states. Uncertainty analysis regarding the model parameters is performed using a Monte-Carlo simulation method. The method developed in this research may reveal some important characteristics of soil moisture or precipitation over a large area, in particular, those relating to abrupt change in soil moisture or preciptation having extremely variable duration.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.155-162
• /
• 1994

The drying shrinkage of concrete has a close relation to the water movement, Since the diffusion process of water in concrete is strongly dependent on the temperature and pore humidity, the process is highly nonlinear phenomena. It is shown that the analytical results of this study are in good agreement with experimental data in the literatures, and results calculated by BP-KX model. The internal stress caused by moisture distribution which was resulted from the diffusion process, was calculated quantitatively. The tensile stress which occurred in the drying outer zone mostly exceeded the tensile strength of concrete, and necessarily would result in crack formation.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.141-147
• /
• 2009

The fluctuation of physical properties in wood or wood composites is an important subject when the materials in building and construction. Sorption and desorption occur in wood when exposed to the open air, and the temperature distribution in wood can fluctuate as a result of changes in environmental temperature, solar radiation, humidity, and wind velocity. In this study, the temperature difference and fluctuation caused by outdoor environment among different wood species were analyzed using a numerical method. The effect on the process of heat transfer in wood caused by environmental factors was investigated using 1-dimensional partial differential equation with real boundary and initial conditions. The experimental data have been used to check the accuracy of programming code. Through analysis, it was found out that density and moisture content have a negative effect on thermal diffusivity of wood.

• Water for future
• /
• v.27 no.2
• /
• pp.129-137
• /
• 1994

The surface hydrology of large land areas is susceptible to several preferred stable states with transitions between stable states induced y stochastic fluctuation. This comes about due to the close coupling of land surface and atmospheric interaction. An interesting and important issue is the duration of residence in each mode. Mean transtion times between the stable modes are analyzed for different model parameters or climatic types. In an example situation of this differential equation exhibits a bimodal probability distribution of soil moisture states. Uncertainty analysis regarding the model parameters is performed using a Monte-Carlo simulation method. The method developed in this research may reveal some important characteristics of soil moisture or precipitation over a large area, in particular, those relating to abrupt changes in soil moisture or precipitation having extremely variable duration.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.159-169
• /
• 2010

A multiphysics model analysis including moisture transport, heat transfer and solid mechanics and experiments on the normal and light weight concrete were carried out in order to study the effect of preabsorbed water in the light weight aggregates on the drying and shrinkage characteristics of concrete. Consequently, with fixed water-cement ratio, loss of water content of normal and light weight concrete were compared and the results showed that the lightweight concrete lost less moist than the normal concrete in early age and long term which was by moist supply effect. Accordingly, shrinkage strain size and distribution of lightweight concrete were decreased, and shrinkage reducing effect was efficient in early age with water cement ratio 0.3 and in both early age, and long term with water cement ratio 0.5. The comparison of analysis results and exaperimental results indicate that characteristic values of moisture transport and the relation humidity and shrinkage strain from this study are resonable for application for other differential shrinkage analysis in lightweight concrete.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.401-415
• /
• 2017

In this article, hygro-thermo-mechanical vibration and buckling of exponentially graded (EG) nanoplates resting on two-parameter Pasternak foundations are studied using the four-unknown shear deformation plate theory. The material properties are presumed to change only in the thickness direction of the EG nanoplate according to two exponential laws distribution. The boundary conditions of the nanoplate may be simply supported, clamped, free or combination of them. To consider the small scale effect on forced frequencies and buckling, Eringen's differential form of nonlocal elasticity theory is employed. The accuracy of the present study is investigated considering the available solutions in literature. A detailed analysis is executed to study the influences of the plate aspect ratio, side-to-thickness ratio, temperature rise, moisture concentration and volume fraction distributions on the vibration and buckling of the nanoplates.

• Fire Science and Engineering
• /
• v.14 no.3
• /
• pp.27-32
• /
• 2000

The assessment of wildland fire hazard is the first priority to be considered in the prevention, extinction and control of wildland fire. For the standard to measure wildland fire hazard, the wildland fire Warning System is currently being used in Korea which computes the wildland fire occurrence hazard index through a stick weight to moisture conversion formula. It shows the risk of fuel substance being exposed to fire by meteorological factors. For a comprehensive assessment of wildland fire hazards by area, the major factors'hazards need to be measured and the assessment of wildland fire needs to be conducted through historical statistic examination. Therefore, the wildland (ire outbreak frequency and its seriousness of damage are analyzed through historical statistic examination to conduct the assessment of a wildland fire hazard, and then the calorific value of a forest is analyzed through differential scanning calorimeter measurement which assesses the comparative calorific hazard according to the geographical distribution of vegetation.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• The Korean Journal of Ecology
• /
• v.23 no.5
• /
• pp.407-421
• /
• 2000

The forest vegetation surrounding Taegu area was investigated by the methodology of the ZM school of phytosociology, from September, 1994 to August, 1997. The forest vegetation was classified into 7 communities, 8 subcommunities and 5 afforestations as follows : Quercus mongolica community (Typical subcommunity, Carex siderosticta subcommunity), Quercus variabilis community, Quercus acutissima community, Quercus dentate community, Carpinus cordata-Acer mono community (Typical subcommunity, Quercus serrata subcommunity, Cornus controversa subcommunity), Pinus densiflora community (Typical subcommunity, Sanguisorba officinalis subcommunity, Rhododendron schlippenbachii subcommunity), Lespedeza maximowiczii-Rhododendron mucronulatum community , Robinia pseudo-acacia afforestation, Pinus rigida afforestation, Larix leptolepis afforestation, Pinus thunbergii afforestation, Pinus koraiensis afforestation. The differential species of the Quercus mongolica community were Quercus mongolica, Athyrium yokoscense, Rhododendron schlippenbachii, Fraxinus sieboldiana, Acer pseudo-sieboldianum, Symplocos chinensis for. pilosa, Astilbe chinensis var. davidii, Weigela subsessilis, and Melampyrum roseum, those of the Carpinus cordata-Acer mono community were Acer mono, Carpinus cordata, Carpinus laxiflora, and Staphylea bumalda, those of the Pinus densiflora community were Pinus densiflora, Quercus serrata, Cocculus trilobus, and Juniperus rigida. Constance degree of the Quercus serrate was especially high in shrub and herb layers of the Pinus densiflora community. The results of factor analysis by DCA showed that distribution pattern of the communities were similar to that by Z-M method and that communities were arranged according to soil moisture gradient. Rhododendron schlippenbachii subcommunity of the P. densiflora community and the Typical subcommunity of the Q. mongolica community were distributed in similar environments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.