• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.369-372
• /
• 1996

The factory under this study consists of mixed-model assembly lines and workcenters which provide parts to the main lines. Parts produced by the workcenter have different specifications for different product models. The workcenters fabricate parts in batches, and they are divided into two types. A type 1 center supplies parts only to the main line that is designated to the center while type 2 center provides parts to all the main lines. The purpose of this study is to develop a scheduling scheme for the workcenter, and the main objective of the schedules is to provide parts for the main lines without delay. The facts that make the scheduling challengeable are that 1) the different models existing together on a main line request different parts, 2) the spaces for part inventories are limited and 3) set up times are sequence dependent and long in some cases. This study presents developed scheduling schemes for the type 1 center and explains the scheduling and control structure used.

• Journal of the Korean Dietetic Association
• /
• v.19 no.4
• /
• pp.389-399
• /
• 2013

This study compared the nutritional composition and antioxidative activity of different parts of Taraxacum coreanum (aerial parts and roots) according to different drying methods (natural drying and freeze-drying). There were no significant differences in vitamin C content in roots depending on the drying methods. However, vitamin A (P<0.01), E (P<0.001) and C (P<0.001) content of aerial parts, and vitamin A (P<0.001) and E (P<0.05) content of roots were significantly higher after freeze-drying compared to natural drying. For organic acids, the oxalic acid content of the aerial parts and roots were the highest. The total polyphenol and total flavonoid content in extracts from the aerial parts (P<0.01) and roots (P<0.05) were significantly higher after freeze-drying compared to natural drying. In addition, the total polyphenol and flavonoid content, DPPH radical scavenging activity, and antioxidative index from the natural drying and freeze-drying of Taraxacum coreanum extracts were significantly higher in the aerial parts compared to the roots (P<0.05). These results suggest that the nutritional composition and antioxidative activity of Taraxacum coreanum are higher in the aerial parts compared to the roots, and higher after freeze-drying compared to natural drying. Therefore, the aerial parts of Taraxacum coreanum could be suggested as an antioxidative functional food source.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.466-469
• /
• 2005

Chinese cabbage (Brassica campestris L. Pekinensis) is Brassica vegetable that contains high amounts of glucosinolates. Glucosinolates and their breakdown products are thought to contribute to health promotion by preventing some cancers. Chinese cabbage is the most commonly consumed vegetable in Asian countries including Korea. In this study, qualitative and quantitative analyses of 3-butenyl glucosinolate (Gluconapin) from different cultivars and different parts of the cabbage were performed. Gluconapin of Chinese cabbage was extracted by hot ethanol ($80^{\circ}C$), isolated by an anion exchange column and identified by GC/MS and LC/MS. The levels of glucosinolates in Chinese cabbage varied according to the different parts, cultivars, and blanching time. In general, the concentrations of 3-butenyl isothiocyanate (ITC) were higher in the leaf than in the midribs parts. The cultivar 'Bulam no. 3' had a much greater content of 3-butenyl ITC than the cultivar 'Garak no. 1,' and the levels of butenyl ITC were highest after two weeks of storage. Blanching treatment decreased the concentration of 3-butenyl ITC. The ITC concentration varied extensively among different crops of the same species, and according to the different parts on the cabbage, the storage duration and the boiling time.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2011

This paper deals with researching and designing the fastening parts to be used in order to assemble various Teaching Aids Robots (or Hands-on Robots) with originally incompatible parts supplied by different manufacturers. The suggested fastening parts provide the compatibility among Teaching Aids Robots even though the educational robot customers use incompatible parts from different companies. The designed fastening parts are classified into four set groups such as frame set, sliding-bar set, connector set, and set of chuck and rivet/bolt. Each set of the fastening parts reflects the needs collected from the users, and then some portion of new idea has been added to implement the needs. In this paper, the examples of the Teaching Aids Robots which are assembled with both commercial parts and the designed parts are presented in order to evaluate the compatibility and usability of the suggested fastening parts. As a result, both compatibility and usability of the fastening parts suggested in this paper were proved. The designed fastening parts have been distributed to more than 100 elementary schools nationwide.

• Korean Journal of Human Ecology
• /
• v.14 no.5
• /
• pp.847-858
• /
• 2005

The purpose of this study was to compare the differences in recognition of sexy body parts and apparel designs by age and to discover the correlations between sexy body parts and apparel designs. Data were collected through a survey of 265 males and 303 females. Analyses included t-tests, f-tests, and Pearson's correlations. The results were as followings; 1. The 20's-30's age group found female body parts were sexier than 40's-50's did. 20's-30's believed the male body was sexier than 40's-50's did. 2. The age groups found men's clothing designs were different by different age groups. Also, differences in female clothing designs were recognized by different age groups. 3. The 40's-50's age group recognized see-through sexier than 20's-30s did. Differences in sexy color recognition by age were also found. 4. There were correlations between most of sexy body parts and designs which emphasized the body parts. The results of this study show the differences in recognition and correlation by age. The results may be applied to developing sexy designs for different targeted age groups.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3104-3109
• /
• 2007

The present study has been carried out to investigate the pumping characteristics for different figures of inlet and outlet in diffuser/nozzle based on piezoelectric micropump. Piezoelectric micropump system consists of several parts like a pumping chamber, diffuser/nozzle, piezoelectric element and tubes. Parts of the micropump connected with diffuser/nozzle and tubes have been analyzed.. The magnified parts have been classified into two different models based on their resistance. These models have been further classified into six models with each one having three different angles at the magnified parts. Each model has been compared and analyzed using the simulation tool, namely, CFD-ACE depending on their flow rates and characteristics.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.349-357
• /
• 2012

This paper presents a hybrid motor prototype convenient to modify the magnet and reluctance torques. The rotor of the prototype consists of magnet and reluctance parts, so the generated torque includes both magnet and reluctance torques. A considerable feature of the motor is that the ratio of the magnet and reluctance parts can be modified on the rotor and the rotor hybridization ratio can be varied. Another important point is the mechanical angle between the parts changed by means of the suitable construction of the parts on the rotor shaft. Finite element (FE) analysis was carried out for the proposed motor and static torque measurements were realized. The FE results were compared with the experimental results. Average torque and maximum torque values were obtained and three dimensional 3-D graphs were formed by using the experimental data. It is possible to make different combinations by changing the parts and the angle between the parts due to the proposed motor. So the magnet and reluctance torques are modified and different combinations give different torque behavior.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.248-252
• /
• 2015

Currently composite manufacturing process, such as linear friction welding plus NC machining, is the main method for the manufacturing and repairing of complex parts with integrated structure. Due to different datum position and inevitable distortion from different processes, it is important to ensure sufficient machining allowance for complex parts during the NC machining process. In this paper, a workpiece localization approach for machining allowance optimization of complex parts based on CMM inspection is developed. This technique concerns an alignment process to ensure sufficient stock allowance for the single parts as well as the whole integrated parts. The mathematical model of the constrained alignment is firstly established, and then the symmetric block solution strategy is proposed to solve the optimization model. Experiment result shows that the approach is appropriate and feasible to distribute the machining allowance for the single and whole parts for adaptive machining of complex parts.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2396-2403
• /
• 1994

An experimental study on material characterization and mechanical properties of SMC(Sheet Molding Compounds) compression method parts was carried out. Simple compression test using grease oil as a lubricant was carried out to characterize flow stress of SMC at elevated temperatures. Two different mold temperatures, $130^{\circ}C{\;}and{\;}150^{\circ}C$ and two different mold speeds, 15, 45 mm/min were used for preparing the specimen of SMC compression molded parts. Surface roughness, tensile, and 3-point bending tests were used to determine the effects of molding temperatures and speeds on mechanical properties of compression molded SMC parts. Orientation and distribution of glass fiber in the compression molded SMC parts were also investigated by photographing the burnt flat specimen and taking SEM(Scanning Electron Microscope) of cross-sectional T-specimen.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.2
• /
• pp.99-105
• /
• 2018

The aim of this study is to compare the anti-inflammatory and immunological activity of different parts (bone, meat, and rind) of Yeonsan Ogye (YO). In order to evaluate cytotoxicity, MTT assay was performed. We investigated the production of nitric oxide (NO) and pro-inflammatory cytokines, such as IL-$1{\beta}$, IL-6, and TNF-${\alpha}$, in LPS-induced RAW264.7 cells. All parts of the YO showed no toxicity at concentrations of 1, 10, and $100{\mu}g/m{\ell}$. Rooster's bone, hen's bone, and rind decreased the production of NO. And rooster's bone, meat, and hen's bone also attenuated TNF-${\alpha}$ production in LPS-induced RAW 264.7 cells. In addition, all parts of the YO decreased IL-$1{\beta}$ and IL-6 production in LPS-induced RAW264.7 cells, whereas they all increased IL-$1{\beta}$, IL-6 and TNF-${\alpha}$ production in normal RAW264.7 cells. Rooster exhibited higher immune activation and inhibitory activity on inflammation than a hen, and among different parts of the YO, bone showed the highest activity. Our results demonstrated and compared the anti-inflammatory and immunological activity of different parts of the YO. These results suggest that YO may be developed as a raw material for new health supplement food and medicine to attenuate various symptoms related to inflammation and immunity.