• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.282-299
• /
• 2024

Target detection (TD) is a research hotspot in the field of hyperspectral imaging (HSI). Traditional TD methods often mine targets from HSIs under a single imaging condition, without considering the influence of imaging conditions. In fact, the spectra of ground objects in HSIs are uncertain and affected by the imaging conditions (weather, atmospheric, light, time, and other angle conditions including zenith angle). Hyperspectral data changes under different imaging conditions. Therefore, the detection result for a single imaging condition cannot accurately reflect the effectiveness of the detection method used. It is necessary to analyze the performance of various detection methods under different imaging conditions, to find a more applicable detection method. In this paper, we study the performance of TD methods under various land-based imaging conditions. We first summarize classical TD methods and evaluation methods. Then, the detection effects under various imaging conditions are analyzed. Finally, the concepts of the stability coefficient (SC) and effective area under the curve (EAUC) are proposed to comprehensively evaluate the applicability of detection methods under land-based imaging conditions, in terms of both detection accuracy and stability. This is conducive to our selection of detection methods with better applicability in land-based contexts, to improve detection accuracy and stability.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.391-399
• /
• 2021

곡면 배열 센서는 빔의 지향 방위에 따라 부 배열이 구성된다. 여기서 부 배열의 센서 선택 방법에 따라 곡면 배열 센서의 성능이 달라질 수 있다. 또한, 곡면 배열 센 서는 형상의 특성으로 인해 빔 지향 방위에 따라 부 배열의 형상이 달라진다. 따라서 빔 지향 방위에 따라 지향지수, 빔 폭 등의 성능이 달라진다. 그러므로 센서 선택 방법을 선택할 때, 빔 지향 방위에 따라 달라지는 지향지수, 빔폭 등의 성능을 고려해야 한다. 본 논문에서는 각 단일 센서의 위치 벡터가 기준인 부 배열을 선택하는 방법과 센서 빔의 지향 벡터가 기준인 부 배열을 선택하는 방법을 사용하였다. 두 가지 방법에 대해 빔 지향 방위별 지향지수와 수평 및 수직 빔 폭의 평균과 분산을 비교 분석하였다. 또한, 두 방법에서 사용되는 센서 수를 고정 하여 비교 분석하였다. 센서 수를 고정하지 않았을 때는 센서 빔의 지향 벡터 기준 방법의 성능이 대부분 높았으나 수직 빔 폭의 성능은 낮거나 비슷하였다. 하지만 센서 수를 고정하였을 경우, 두 방법 모두 성능은 비슷하나 지향 방위별 성능 분산은 줄어들었다.

• 한국산림과학회지
• /
• 제78권1호
• /
• pp.26-29
• /
• 1989

수목종자(樹木種子)의 포장발아율(圃場發芽率)을 높이는 종자전처리방법(種子前處理方法)을 찾기 위하여, 황벽나무를 비롯한 5수종의 종자(種子)에 대해 종자전처리(種子前處理)에 따른 포장발아율(圃場發芽率)을 조사(調査) 비교(比較)하여 얻은 주요결과(主要結果)는 다음과 같다. 1. 탱자 및 물푸레나무의 포장발아율(圃場發芽率)은 종자전처리간(種子前處理間)에 1% 유의수준(有意水準)에서, 황벽나무는 5% 유의수준(有意水準)에서 각각 통계적(統計的) 유의성(有意性)이 인정(認定)되었으며, 이들 수종(樹種)은 노천이장처리(露天理藏處理)(166 일간(日間)에서 포장발아율(圃場發芽率)이 가장 높았다. 2. 모과나무의 포장발아율(圃場發芽率)은 종자전처리간(種子前處理間)에 1% 유의수준(有意水準)에서 통계적(統計的) 유의성(有意性)이 인정(認定)되었으며, 냉습적처리(冷濕積處理)(110 일간(日間))에서 가장 높았다. 3. 꾸지뽕의 포장발아율(圃場發芽率)은 종자전처리간(種子前處理間)에 5% 유의수준(有意水準)에서 통계적(統計的) 유의성(有意性)이 인정(認定)되지 않았다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.387-393
• /
• 2017

PURPOSE. Beverages may affect the translucency of esthetic dental restorative materials.The aim of the present study was to investigate the effects of coffee and red wine on the translucency of a PICN material with two translucency levels, and finished with different methods. MATERIALS AND METHODS. 2M2 high translucent and translucent VITA Enamic hybrid ceramic blocks were investigated. Rectangular specimens with the dimensions of $12mm{\times}14mm{\times}2mm$ were prepared. The specimens were finished and polished with different methods as suggested by the manufacturer. The translucency parameters of the specimens were evaluated before and after 24 hours, 7 days, and 28 days immersion in distilled water, coffee and red wine. Translucency parameters were measured using a portable spectrophotometer. RESULTS. At the end of 28 days, there was no statistically significant difference between the groups of specimens kept in coffee (P>.05). In the red wine groups, there was a statistically significant difference between the control group and all other groups (P<.05) at the end of 28 days. CONCLUSION. The translucency of hybrid ceramic for a restoration may not be important regarding the effects of coffee on translucency change because the specimens with different translucencies and finishing methods that were immersed to coffee had similar translucency parameters at the end of 28 days. The translucency of hybrid ceramic may be important in the case of red wine, however, since the results showed that highly translucent specimens exposed to red wine demonstrated better translucency parameters than specimens made from translucent blocks at the end of 28 days.

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.424-429
• /
• 2016

Background The objective of this paper was to describe a novel technique for improving the maintenance of nipple projection in primary nipple reconstruction by using acellular dermal matrix as a strut in one of three different configurations, according to the method of prior breast reconstruction. The struts were designed to best fill the different types of dead spaces in nipple reconstruction depending on the breast reconstruction method. Methods A total of 50 primary nipple reconstructions were performed between May 2012 and May 2015. The prior breast reconstruction methods were latissimus dorsi (LD) flap (28 cases), transverse rectus abdominis myocutaneous (TRAM) flap (10 cases), or tissue expander/implant (12 cases). The nipple reconstruction technique involved the use of local flaps, including the C-V flap or star flap. A $1{\times}2-cm$ acellular dermal matrix was placed into the core with O-, I-, and L-shaped struts for prior LD, TRAM, and expander/implant methods, respectively. The projection of the reconstructed nipple was measured at the time of surgery and at 3, 6, and 9 months postoperatively. Results The nine-month average maintenance of nipple projection was $73.0%{\pm}9.67%$ for the LD flap group using an O-strut, $72.0%{\pm}11.53%$ for the TRAM flap group using an I-strut, and $69.0%{\pm}10.82%$ for the tissue expander/implant group using an L-strut. There were no cases of infection, wound dehiscence, or flap necrosis. Conclusions The application of an acellular dermal matrix with a different kind of strut for each of 3 breast reconstruction methods is an effective addition to current techniques for improving the maintenance of long-term projection in primary nipple reconstruction.

• 대한물리의학회지
• /
• 제7권4호
• /
• pp.541-550
• /
• 2012

PURPOSE: The purpose of this study was compare quadriceps femoris muscle activity while performing wall slide squats of four methods. METHODS: Forty subjects, with no history of patellofemoral pain, quadriceps injury, or other knee injury volunteered for this study. Muscle activation of the vastus medialis obliquus, rectus femoris, vastus lateralis muscles were recorded while subjects performed 10 consecutive wall slide squats. Subjects performed the wall slide squats during four different methods: (1) basic wall slide squat, (2) keep back upright against fitness ball, (3) standing of unstable surface, (4) squeezing ball between both knees. Statistical analysis were accomplished by utilizing the one-way ANOVA(Bonferroni's post-hoc test) by SPSS 20.0 program. Significance level was set at p<.05. RESULTS: Muscle activations induced wall slide squats of four methods compared and results showed that there was significant difference only in vastus medialis obliquus and rectus femoris but there was no significant difference in vastus lateralis. The vastus medialis obliquus was significantly different only keep back upright against fitness ball at post-hoc test. The rectus femoris was significantly different keep back upright against fitness ball and standing of unstable surface at post-hoc test. CONCLUSION: Based on these results, we conclude that quadriceps femoris muscle activations are differenced by performing wall slide squats of four different methods in healthy subjects. These data suggest that for quadriceps muscle strengthening, exercise professionals can perform the wall slide squats by altering several task variables. Further research is needed to determine the exact mechanism by which quadriceps function is altered.

• 분석과학
• /
• 제31권3호
• /
• pp.112-121
• /
• 2018

The hydrothermal carbonization method has received great attention because of the conversion process from biomass. The reaction produces various products in hydrochar, bio-liquid, and gas. Even though its yield cannot be ignored in amount, it is difficult to find research papers on bio-liquid generated from the hydrothermal carbonization reaction of biomass. In particular, the heterogeneity of feedstock composition may make the characterization of bio-liquid different and difficult. In this study, bio-liquid from the hydrothermal carbonization reaction of food wastes at $230^{\circ}C$ for 4 h was investigated. Among various products, fatty acid methyl esters were analyzed using two different extraction methods: liquid-liquid extraction and column chromatography. Different elutions with various solvents enabled us to categorize the various components. The eluents and fractions obtained from two different extraction methods were analyzed by gas chromatography with a mass spectrometer (GC/MS). The composition of the bio-liquid in each fraction was characterized, and seven fatty acid methyl esters were identified using the library installed in GC/MS device.

• 설비공학논문집
• /
• 제15권1호
• /
• pp.73-85
• /
• 2003

Four different methods of reducing the heat transfer coefficients from experimental data under dehumidifying conditions are compared. The four methods consist of two different heat and mass transfer models and two different fin efficiency models. Data are obtained from two heat exchanger samples having plain fins or wave fins. Comparison of the data with the reduction methods revealed that the single potential heat and mass transfer model yielded the humidity independent heat transfer coefficients. Two different fin efficiency models - enthalpy model and humidity model - yielded approximately the same fin efficiencies and accordingly approximately the same heat transfer coefficients. The heat transfer coefficients under wet conditions were approximately the same as those of the dry conditions for the plain fin configuration. For the wave fin configuration, however, wet surface heat transfer coefficients were approximately 12% higher. The pressure drops of the wet surface were 10% to 45% larger than those of the dry surface.

• Natural Product Sciences
• /
• 제22권1호
• /
• pp.25-29
• /
• 2016

High-performance liquid chromatography was performed in order to analyze the changes in the flavonoid content (rutin, hyperin, afzelin, quercetin, and kaempferol) of Acanthopanax divaricatus and A. koreanum, in response to different cultivation methods (pinching height, planting time, and top dressing). The total flavonoid content of A. divaricatus and A. koreanum ranged from 0.201 to 0.690 mg/g with different pinching heights, 0.143 to 1.001 mg/g for different planting times, and 0.156 to 1.074 mg/g depending on the rate of fertilizer application. In both A. divaricatus and A. koreanum, the total flavonoid content in the upper section of the plant was greater than that in the lower section. These results demonstrate which cultivation methods maximize the flavonoid content of A. divaricatus and A. koreanum, and thus help to optimize flavonoid yields to improve production for nutraceutical, pharmaceutical, and cosmeceutical applications.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.