• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.123-133
• /
• 2024

The paper deals with the propagation of Rayleigh waves in a nonlocal thermoelastic isotropic layer which is lying over a nonlocal thermoelastic isotropic half-space under the purview of Green-Lindsay model and Eringen's nonlocal elasticity in the presence of voids. The normal mode analysis is employed to the considered equations to obtain vector matrix differential equation which is then solved by eigenvalue approach. The frequency equation of Rayleigh waves is derived and different particular cases are also deduced. The effects of voids and nonlocality on different characteristics of Rayleigh waves are presented graphically.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.50-57
• /
• 1999

This study aim to clarify the way of spatial composition of Tongdo Temple by diachronic analysis. The way of spatial composition was clarified through the analysis of built in architectural system in three periods. The result are as follows; 1. Spatial composition of Tongdo temple was changed in three period that it were establishment period, 1300s, and 1700s by the transition of meaning structure occurring the transition of spatial composition. 2. It was found out that the wat of spatial composition was three through the diachronic analysis the transition of spatial composition in Tongdo temple. 3. Juxtaposition as a way of spatial composition found out through the diachronic analysis is equivalent articulation of three sections; an upper, a middle, and a lower section and polyaxis or polycore in the each sections. Fusion is heterogenetic minglement mingling different kind of buildings and conjugation conjugating different kind of decorations. And accumulation of layer is mutilayer laying different time of layer and multi aspect aligning different kind of aspects since the temple's establishment.

• 한국해양학회지
• /
• 제15권1호
• /
• pp.58-61
• /
• 1980

Water movements at nine different layers were observed from July 31 to August 2, 1976 at station H, which has water depth 42 meters and 3km far from the coast of Wolsong, and dispersion coefficients were computed from these current data, then relative magnitudes of dispersion coefficients were calculated at each layers. Relative magnitudes of dispersion coefficients based on the surface value are 62% at 5m layer, 24% at 10m layer, 20% at 15m and 20m layers, 17% at 25m layer, 24% at 30m layer, 28% at 35m layer and 15% at bottom layer, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.82-85
• /
• 2000

The less sensitive structure to the surface effect has been presented utiliting an undoped GaAs layer on the n-GaAs channel. The undoped layer has been found to be effective to supress the frequency dispersion phenomena caused by a surface trapping effect and to raise the MESFET's performance. The gate structure, with an undoped layer underneath the gate metal has been found to be effective to improve the breakdown voltage. GaAs MESFETS with different physical structures are fabricated and DC characteristics are measued. GaAs MESFET's are fabricated on epi-wafers which have an undoped GaAs layer in between n+ and n GaAs layers grown by MBE.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1936-1939
• /
• 2004

This paper proposes streaming layer for personal robot's middleware. Under assumption that robot has open architecture, i.e. consists of modules created by different vendors and intercommunication between these modules is necessary, we have to consider that there are many different network interfaces. To make communication between modules possible it is necessary to develop new type of middleware. Such middleware has to support different platforms, i.e. OS, network interface, hardware, etc. In addition, it is necessary to implement effective interface between network and application in order to manage inter application communications and use network resources more effectively. Streaming layer is such interface that implements necessary functionality together with simplicity and portability. Streaming layer provides high level of abstraction and makes communication between distributed applications transparent as if are located in same module. With possibility of extension by user defined application interfaces it is suitable for distributed environments, i.e. module based architecture including small-embedded systems like as DSP board. To verify the proposed streaming layer structure it is implemented using C and tested.

• 한국지반공학회논문집
• /
• 제27권4호
• /
• pp.67-76
• /
• 2011

본 연구에서는 수치해석 방법을 통하여 점성토, 사질토, 그리고 점성토와 사질토의 혼합지반에 대하여 상부, 중간, 하부의 하중 작용위치에 따른 석션기초의 극한 수평저항력 및 거동을 분석하였다. 해석결과 지반조건에 관계없이 중간 위치에 재하시 가장 큰 수평저항력을 발휘하는 것으로 나타났으며, 사질토층의 극한저항력이 점성토층이나 점성토-사질토층에 비해 상대적으로 큰 값을 나타내었다. 그리고 석션기초의 이동량과 회전량 분석결과 석션기초의 이동량은 재하위치와 지반조건 모두에 대해 영향을 받지만, 회전량은 지반조건에 관계없이 재하위치에 가장 큰 영향을 받는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.274-282
• /
• 2016

This aims of this study were to investigate the relationship between non-destructive evaluation (NDE) and actual bending properties of particleboard, and to predict the bending properties of three-layer particleboard. Three kinds of raw materials, i.e. Hinoki (Chamaecyparis obtusa Endl.) strand, knife-milled Douglas-fir (Pseudotsuga manziesii (Mirb) Franco), and hammer-milled matoa (Pometia spp.) obtained from wooden industry, were utilized as furnish for experimental panel with methylene diphenyl diisocyanate (MDI) resin as binder. The NDE test was conducted by hit sounds using an FFT analyzer according to the spectrum peak of wave frequency, while the static bending test was conducted according to JIS A-5908. The results reveal that the dynamic Young's modulus as an NDE test has a potential for being used to predict the elastic bending of particleboards by a specific equation for adjusting its proper values. The values of NDE and static test are significantly different with a deviation range at 3-20%. The bending stiffness of three-layer particleboards manufactured from different wood species is predictable by observing the bending stiffness of two elements based on the thickness of its layers. The predicted values of bending stiffness and static test are significantly different with a deviation range at 5-24%.

• Computers and Concrete
• /
• 제27권5호
• /
• pp.417-435
• /
• 2021

The optimal distribution of steel fibers over different layers of concrete can be considered as an appropriate method in improving the structural performance and reducing the cost of fiber-reinforced concrete members. In addition, the use of waste tire rubber in concrete mixes, as one of the practical ways to address environmental problems, is highly significant. Thus, this study aimed to evaluate the flexural behavior of functionally graded steel fiber-reinforced concrete containing recycled tire crumb rubber, as a volume replacement of sand, after exposure to elevated temperatures. Little information is available in the literature regarding this subject. To achieve this goal, a set of 54 one-, two-, and three-layer concrete beam specimens with different fiber volume fractions (0, 0.25, 0.5, 1, and 1.25%), but the same overall fiber content, and different volume percentages of the waste tire rubber (0, 5, and 10%) were exposed to different temperatures (23, 300, and 600℃). Afterward, the parameters affecting the post-heating flexural performance of concrete, including flexural strength and stiffness, toughness, fracture energy, and load-deflection diagrams, along with the compressive strength and weight loss of concrete specimens, were evaluated. The results indicated that the flexural strength and stiffness of the three-layer concrete beams respectively increased by 10 and 7%, compared to the one-layer beam specimens with the same fiber content. However, the flexural performance of the two-layer beams was reduced relative to those with one layer and equal fiber content. Besides, the flexural strength, toughness, fracture energy, and stiffness were reduced by approximately 10% when a 10% of natural sand was replaced with tire rubber in the three-layer specimens compared to the corresponding beams without crumb rubber. Although the flexural properties of concrete specimens increased with increasing the temperature up to 300℃, these properties degraded significantly with elevating the temperature up to 600℃, leading to a sharp increase in the deflection at peak load.

• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.399-409
• /
• 2018

The dynamic response and seismic damage of single-layer reticulated shells in the near field of a rupturing fault can be different from those in the far field due to the different characteristics in the ground motions. To investigate the effect, the dynamic response and seismic damage of this spatial structures subjected to two different ground motions were numerically studied by nonlinear dynamic response analysis. Firstly, twelve seismic waves with an apparent velocity pulse, including horizontal and vertical seismic waves, were selected to represent the near-fault ground motion characteristics. In contrast, twelve seismic records recorded at the same site from other or same events where the epicenter was far away from the site were employed as the far-fault ground motions. Secondly, the parametric modeling process of Kiewitt single-layer reticulated domes using the finite-element package ANSYS was described carefully. Thirdly, a nonlinear time-history response analysis was carried out for typical domes subjected to different earthquakes, followed by analyzing the dynamic response and seismic damage of this spatial structures under two different ground motions based on the maximum nodal displacements and Park-Ang index as well as dissipated energy. The results showed that this spatial structures in the near field of a rupturing fault exhibit a larger dynamic response and seismic damage than those obtained from far-fault ground motions. In addition, the results also showed that the frequency overlap between structures and ground motions has a significant influence on the dynamic response of the single-layer reticulated shells, the duration of the ground motions has little effects.

• Advances in environmental research
• /
• 제5권3호
• /
• pp.201-211
• /
• 2016

Laboratory tests were conducted to evaluate the performance of waste rubber shreds in leachate collection layer of engineered landfills. The study found that waste rubber shreds layer in combination with a gravel layer can be of potential use in landfill drainage system. To study the performance, conventional gravel along with waste rubber shreds were used in different combinations (with total layer thickness = 500 mm) as leachate collection media. For the laboratory study poly vinyl chloride (PVC) pipes were used. The size range of waste rubber shreds used were 25 mm to 75 mm in length and width = 10 to 20 mm. The gravel size used in the leachate collection media is 10 mm to 20 mm size. Performance study of 7 Test Cols. with different combinations of waste rubber shreds and gravel bed thickness were studied to find out the best combination. The study found that the Test Col.-3 having waste rubber shreds thickness = 200 mm and gravel layer thickness = 300 mm gave the best results in terms of percentage removal in various physicochemical parameters present in the leachate. Further to find the best size rubber shreds three more Test Cols - 8, 9 and 10 were constructed having the rubber shreds and gravel layer ratio same as that of Test Col.-3 but having rubber shreds width = 10 mm, 15 mm and 20 mm respectively. Based on the results obtained using Test Cols. 8, 9 and 10 the study found that smaller size rubber shreds gave bests results in terms of improvement in various leachate parameters.