• 한국구조물진단유지관리공학회 논문집
• /
• 제20권5호
• /
• pp.85-92
• /
• 2016

본 연구에서는 경량기포 콘크리트를 이용한 육성용 토양골재의 적용성을 평가하기 위해서 고로슬래그 기반 기포콘크리트의 총 8배합과 인공토양골재를 제조하였다. 고로슬래그 기반 기포콘크리트 배합의 주요변수는 단위결합재량으로서 100에서 $800kg/m^3$으로 변화하였다. 경량기포콘크리트는 플로우, 슬러리 및 절건 밀도와 재령별 압축강도를 측정하였으며, 파쇄된 인공토양골재는 pH, 입도분포, 투수계수, 양이온치환용량(CEC), 유기물함유량(C/N비)을 측정하였다. 측정결과 경량기포콘크리트의 플로우, 슬러리 및 절건밀도와 재령별 압축강도는 단위결합재량이 증가함에 따라 증가하였다. 경량기포콘크리트의 단위결합재량이 $500kg/m^3$ 이상인 배합의 28일 압축강도는 4 MPa 이상이었다. 인공토양골재에 3일 이상의 15% 희석된 제1인산암모늄의 수용액침지는 pH를 저감시키는데 효과적이었다. 또한 제조된 인공토양골재는 양이온 치환용량(CEC) 측면에서 상급으로 평가되었지만 C/N비 측면에서는 조경시방서를 만족시키지 못하였다.

• 한국융합학회논문지
• /
• 제13권1호
• /
• pp.229-234
• /
• 2022

비파괴적으로 콘크리트 강도를 간편하게 구할 수 있는 방법으로 적산온도(Maturity) 개념을 통한 콘크리트 강도 추정방법이 많은 연구자를 통하여 검증되고 있다. 본 연구에서는 적산온도 개념을 도입하여 콘크리트 강도를 평가하고자 하는데, 11편 논문의 실험결과에서 W/B=18~70%의 범위에서 일정한 온도(5, 10, 20, 30, 40, 50℃)와 다양한 재령(0.5~182일)에 따른 843개의 실험값을 가지고 가장 간편한 적산온도 모델을 사용하고, 강도별로 보통강도 콘크리트(40Mpa이하), 고강도콘크리트(40~70MPa), 초고강도 콘크리트(70MPa 이상)로 구분하여 현장에서 쉽게 적용할 수 있는 적산온도와 콘크리트 강도관계를 도출하고, 적산온도에 따른 최저 보증 콘크리트 압축강도 추정식을 제시하였다.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.717-724
• /
• 2017

In this paper, four formulas are proposed via gene expression programming (GEP)-based models and regression analysis (RA) to predict the flexural strength ($f_s$) values of mortars containing different mineral admixtures that are ground granulated blast-furnace slag (GGBFS), silica fume (SF) and fly ash (FA) at different ages. Three formulas obtained from the GEP-I, GEP-II and GEP-III models are constituted to predict the $f_s$ values from the age of specimen, water-binder ratio and compressive strength. Besides, one formula obtained from the RA is constituted to predict the $f_s$ values from the compressive strength. To achieve these formulas in the GEP and RA models, 972 data of the experimental studies presented with mortar mixtures were gathered from the literatures. 734 data of the experimental studies are divided without pre-planned for these formulas achieved from the training and testing sets of GEP and RA models. Beside, these formulas are validated with 238 data of experimental studies un-employed in training and testing sets. The $f_s$ results obtained from the training, testing and validation sets of these formulas are compared with the results obtained from the experimental studies and the formulas given in the literature for concrete. These comparisons show that the results of the formulas obtained from the GEP and RA models appear to well compatible with the experimental results and find to be very credible according to the results of other formulas.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.193-202
• /
• 2013

Geopolymer mortar compressed blocks were prepared using fly ash, ground granulated blast furnace slag, silica fume and metakaolin as binders and sand/quarry dust/pond ash as fine aggregate. Alkaline solution was used to activate the source materials for synthesizing the geopolymer mortar. Fresh mortar was used to obtain the compressed blocks. The strength development with reference to different parameters was studied. The different parameters considered were fineness of fly ash, binder components, type of fine aggregate, molarity of alkaline solution, age of specimen, fluid-to-binder ratio, binder-to-aggregate ratio, degree of saturation, etc. The compressed blocks were tested for compression at different ages. It was observed that some of the blocks attained considerable strength within 24 h under ambient conditions. The cardinal aim was to analyze the experimental data generated to formulate a phenomenological model to arrive at the combinations of the ingredients to produce geopolymer blocks to meet the strength development desired at the specified age. The strength data was analyzed within the framework of generalized Abrams' law. It was interesting to note that the law was applicable to the analysis of strength development of partially saturated compressed blocks when the degree of saturation was maintained constant. The validity of phenomenological model was examined with an independent set of experimental data. The blocks can replace the traditional masonry blocks with many advantages.

• Computers and Concrete
• /
• 제13권1호
• /
• pp.31-47
• /
• 2014

This research is focused on obtaining the fracture property of steel fiber reinforced concrete(SFRC) specimens at early ages of 1, 2, 3 and 7-day, respectively. For this purpose, three point bending tests of nine groups of SFRC beams with notch of 40mm depth and different steel fiber ratios were conducted. The experimental results of early age specimens were compared with the 28-day hardened SFRC specimens. The test results indicated that the steel fiber ratios and curing age significantly influenced the fracture properties of SFRC. A reasonable addition of steel fiber improved the fracture toughness of SFRC, while the fracture energy of SFRC developed with curing age. Moreover, a quadratic relationship between splitting strength and fracture toughness was established based on the experiment results. Additionally, afinite element (FE) method was used to investigate the fracture properties of SFRC.A comparison between the FE analysis and experiment results was also made. The numerical analysis fitted well with the test results, and further details on the failure behaviors of SFRC could be revealed by the suggested numerical simulation method.

• Advances in concrete construction
• /
• 제6권3호
• /
• pp.297-309
• /
• 2018

The objective of this study was to evaluate the influence of silica fume (SF) on the hydration heat and compressive strength of concrete. Portland cement with w/(c+sf) ratios varying between 0.25 to 0.45 was substituted by 10%, 20% and 30% of SF by mass. A superplasticizer was used to maintain a fluid consistency of the concrete. The heat of hydration was monitored continuously by a semi-adiabatic calorimetric method for 10 days at $20^{\circ}C$. Compressive strengths are tested for each mixture until age of 180 days. The results show that silica fume considerably influences the evolution and the ultimate values of the compressive strengths as well as the hydration heat especially for 10% rate. The w/b ratio has a considerable effect where its decrease modifies compressive strength and hydration heat more than silica fume. The correlation of the obtained results allows deducing of ultimate properties as well as the ages to reach half of their values. The correlation coefficients are close to unity and reflect the judicious choice of these relationships to be used to predict compressive strength and hydration heat.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.823-828
• /
• 1999

Blast furnace slag cement(BSC) has many merits in relation to its prodution cost or environmental problem of these days, but it has still some limitation in broad use mainly because it has the lower early hydration strength than the normal portland cement(PC) has. In the present study, several different experimental concepts to improve its low strength in the early hydration stage were tried out which addition of the effective alkali activators such as Ca(OH)2 and limestone powder, fly ash in existing BSC. It was found that the addition of suitable quantity the effective alkali activators such as Ca(OH)2 and limestone powder, fly ash in BSC can be a possible way to get enough early strength compared with the PC and existing BSC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.789-792
• /
• 2006

The purpose of this study is to investigation the fundamental properties of alkali activated slag of type and concentration of alkali activator. In this paper sodium silicate, sodium carbonate and sodium hydroxide were used as alkaline activator and their concentration were 1, 3, 5 and 7 $Na_2O$ weight percent. The physical properties of alkali activated blast furnace slag cement mortar (AAS) were investigated by flow test and compressive strength. And the hydration properties of AAS characterized by X-ray diffraction and scanning electron microscope. Result show that Alkali activated slag mortar strengths were continuously increased with adding amount and ages. C-S-H were formed to be the main products up to 28days of hydration.

• 한국도로학회논문집
• /
• 제7권3호
• /
• pp.79-91
• /
• 2005

포틀랜드 시멘트 콘크리트 도로 포장의 온도 패턴을 콘크리트 타설시부터 최근에 개발된 저렴하며 획기적인 센서를 이용하여 측정하였으며 그 결과를 분석하였다. 콘크리트 포장의 온도 측정은 여러 다른 지역에서 여러 다른 두께를 가진 콘크리트 포장에서 수행하였다. 콘크리트 포장의 온도 패턴은 깊이방향과 콘크리트 타설시간에 따른 종방향의 변화를 고려하여 분석하였으며, 포장 표면의 반사율, 그늘, 덮음막 등이 콘크리트 포장의 온도 패턴에 미치는 영향을 분석하였다. 본 연구 결과에서 콘크리트를 타설한 날의 콘크리트 포장의 최고 온도는 종방향을 따라 타설 시간이 다름으로 인해 생기는 차이가 두드러지는 것을 알 수 있었다. 콘크리트의 영점응력온도(zero-stress temperature)는 타설한 날의 최고 온도와 직접적인 연관이 있으므로 타설 시간에 따른 최고 온도의 차이는 콘크리트 포장의 거동 및 성능에 크게 영향을 미칠 수 있다. 또한 콘크리트 포장의 표면 상태 (표면 색상, 그늘 유무, 덮음막 유무 등)도 콘크리트 포장의 온도 패턴에 큰 영향을 미치는 인자인 것으로 분석되었다.

• International Journal of Concrete Structures and Materials
• /
• 제10권sup3호
• /
• pp.97-108
• /
• 2016

When the energy performance of concrete is substantially higher than that of normal type concrete, such concrete is regarded as energy efficient concrete (WBSCSD 2009). An experimental study was conducted to investigate mechanical properties of energy efficient concrete with binary, ternary and quaternary admixture at different curing ages. Slump test for workability and air content test were performed on fresh concretes. Compressive strength, splitting tensile strength were made on hardened concrete specimens. The mechanical properties of concrete were compared with predicted values by ACI 363R-84 Code, NZS 3101-95 Code, CSA A23.3-94 Code, CEB-FIP Model, EN 1991, EC 2-02, AIJ Code, JSCE Code, and KCI Code. The use of silica fume increased the compressive strengths, splitting tensile strengths, modulus of elasticities and Poisson's ratios. On the other hand, the compressive strength and splitting tensile strength decreased with increasing fly ash.