• 한국의상디자인학회지
• /
• 제17권3호
• /
• pp.159-168
• /
• 2015

In this study, visual evaluation was wide pants with changes in length of pants and width of hem line of wide pants design to provide data which can enhance wearing image effects at the production of wide pants. According to the length of pants and width of hem line of wide pants, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 40 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the length of pants and width of hem line of wide pants were divided into five factors: individuality, body correction, modesty, body length and cute. 2. According to visual evaluation depending on changes in the length of pants, no significant difference was found in all five positions. 3. According to visual evaluation depending on changes in the length of pants and width of hem line of wide pants, 'width of hem line 60, 100' revealed a significant difference in body correction. 'width of hem line 80' revealed a significant difference in body correction and body length. 4. In terms of interactions over changes in the length of pants and width of hem line of wide pants, no interaction effects were found in all five factors. According to multiple classification analysis(MCA) on the factors without interaction effects, length of pants had more effect on visual image in body correction, body length and cute. In other factors, more influence was observed depending on the width of hem line.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.631-646
• /
• 1996

The purpose of this study was to investigate the difference of visual evaluation about silhouette image. The specific objective were; 1) to construct of silhouette image evaluation instrument using semantic differential scale for the purpose of measuring the width and length; 2) to identify the factor structure of the silhouette; 3) to test the difference of visual perception to the silhouette as the variation of width; 4) to test the difference of visual perception to the silhouette as the variation of length; 5) to test interaction effect between width and length. The major finding were; For the visual evaluation of silhouette as shoulder width variatiorl, there were significant difference in hardness and softness factor. For the hard and soft image, we should express by variation of the shoulder width. For the visual evaluation of silhouette as skirt width variation, there were significant difference in attention factor. For the attensive image, we should express by variation of the skirt width. For the visual evaluation of silhouette as skirt length variation, there were significant difference in activity factor. For the active image, we should express by variation of the skirt length.

• 한국의상디자인학회지
• /
• 제5권1호
• /
• pp.13-24
• /
• 2003

The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.70-77
• /
• 2006

The purpose of this study is to evaluate the differences of visual image by variations in the location and width of the waist band of the one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheff's Test and the MCA method. The results of the study are as follows. According to the result of factor analysis of the visual image based on the changes in the location and width of waist bands, three factors were identified- attractiveness, elegance and practicality. Among them, attractiveness was found to be the most important. The visual image was evaluated positively when waist bands were positioned above the natural waist line and negatively when waist bands were positioned below the natural waist line regardless of their width. In addition, the visual image based on the width of waist bands for one-piece dress was the most positive when the width was 4.5cm. No significant difference was observed in the visual image according to band width when the waist bands were positioned below the natural waist line. The interaction of visual image according to the location and width of waist bands for one-piece dress did not appear. As the main effect, significant differences were observed in all of the three factors according to the location of waist bands, but only two factors excluding elegance showed some difference according to the width of waist bands. When multiple classification analysis was applied to the factors without interaction, the location of waist bands appeared to have more significant effect on visual image than the width of waist bands.

• 대한소아치과학회지
• /
• 제11권1호
• /
• pp.159-167
• /
• 1984

In this experiments, the fracture loads were measured and analysed by using of Instron universal testing machine (Model 1132). With 80 upper and lower deciduous molars that were free of dental caries. Isthmus of teeth were prepared to 1/3 and 1/4 of intercuspal width, and internal line angles with round and sharp shape, and then amalgam restoration were performed. The results of this study were as follows; 1. Resistance to fracture loads were greater with isthmus of 1/3 intercuspal width than of 1/4 intercuspal width, especially, statistically significant difference on upper and lower second deciduous molars. 2. Resistance to fracture loads were greater with rounded internal line angle than sharp internal line angle. The above results were as follows, the fracture loads had greater resistance on isthmus of 1/3 intercuspal width, and rounded internal line angle, but normal physiological occlusal forces could permit isthmus of 1/4 intercuspal width and rounded internal line angle.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제2호
• /
• pp.114-119
• /
• 2004

By Article two of a Japanese urban park low, it prescribes park facilities strictly, and one of the classifications includes 'path and plaza'. In addition, it is assumed that we divide several kinds different paths of width by size of the park in a path design of a park with a textbook of park design in a trunk line path, the main path, a vice-path or a branch path and design it. From such a thing, in the path of an urban park, a line consists straight of fixed width, and it is most that one pattern is considered to be. Therefore, in modem urban park, a path and division of a plaza are lucid explanation. It is rare that the historical parks which generally former daimyo gardens are shown later, and is used as a kind of an urban park width of the path where was particularly posted in a strolling garden in that is fixed, and width waits straight for even a line and waits, and, for this, there is. As a result, it is a path and the situation that are hard to be distinguished of a plaza. Although there are a difference of design and a difference of pavement materials in modem landscape space when We watch road surface constitution of the path that We did that will let you wait, in gross We are uniform, and it is it with a result to be poor in change nature. From such an observation, this consideration compared traditional landscape space and modem landscape space with path width about two points of road surface constitution through the trial that a graph analyzed the actual place data which measured into and lectured on an ideal method of a park path from this.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.10-13
• /
• 2000

The notching effect in etching of un doped amorphous silicon gate had different characteristics and mechanism comparing with reported ones. The undoped amorphous silicon was etched by using HBr gas plasma, First, in the region of small line width, the potential was increased as a result of ions in the exposed surface of oxide, and the incident ions between the small line width were deflected more wide range, therefore the depth of notching was shallow and wide, Second, in the region of large line width of gate, electrons were charged on the top of photoresist and the side of gate, a part of ions deflected, The deflected ions were locally charged positive on the side of gate, and then the potential difference was produced, therefore, ions stored up more at independent line than at dense line, and nothing became deeper by Br ion bombardment.

• 복식문화연구
• /
• 제19권4호
• /
• pp.820-835
• /
• 2011

The purpose of this study is to provide a basic pattern to assist in the development of formal pants that reflect the physical characteristics of women with lower-body obesity. The subjects selected for this study were women in their 20s and 30s with a Rohrer index of 1.6 or higher, a waist circumference 78.5cm to 83.5cm, and a lower drop of at least 18cm. The experimental pants patterns were developed by varying the waist line position, the waist ease, the ease in the hip area, the crotch length, the front and rear crotch width, the leg width, and the total length. Data analysis was performed using the SPSS statistics program(version 18.0). To verify the difference, this study used a variance analysis and Duncan's test. The conclusions drawn by the study are as follows. To reflect the form element of an abdomen with fatty deposits, the waist circumference should have an ease of 2cm. The front waist result was W/4+0.5cm+0.75cm and the rear waist result was W/4-0.5cm+0.25cm. The hip circumference showed a total ease of 4.5cm. The front hip result was H/4+0.75cm and the rear hip result was H/4+1.5cm. The crotch width set to H/16-1cm and the applied rear crotch width was H/16+2cm. The rear hip area was given more ease to reflect the protrusion of the hip. Along the line extending from the knee area to the crotch line, the outer seam line was designed with a gradual S-shaped curve to accommodate the protrusion from the maximum thigh width.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.19-28
• /
• 2004

Tooth is the most important element in esthetic consideration on facial area. Tooth alignment which is in harmony with gingiva, lips, and face is also key element. The purpose of this study was to give a clinical discipline for restoration of gingival contour, which contains a ratio of maxillary 6 anterior teeth, research for gingival contour etc., in case of rehabilitation of maxillary anterior teeth. 300 Dankook university dental school students ,who is their twenties and free from periodontitis, participate in this study. The result was from each 70 males and females who had normal occlusion and tooth alignment. Length, width and length/width ratio of maxillary 6 anterior teeth were 0.74-0.81 in male, 0.81-0.84 in female. There was significant difference between male and female. The most deepest position of gingiva in maxillary central incisor and canine was located in distal part of teeth and maxillary lateral incisor was middle portion. In maxillary central incisors, gingival line of the most deepest point appeared significant difference between male and female (p<0.01) whereas there was no difference in lateral incisors and canines. Distance between interdental papilla apex and the most deepest portion appeared significant difference between male and female. Distance of the deepest position of gingiva is statistically significant except maxillary central incisors and lateral incisors. Standard deviation and mean of the width of labio-lingual were measured in cervical area and there was a significant difference both male and female.(p<0.01) From this result, we could get the mean of maxillary anterior gingival line and these results have great value in clinical guidance in studying maxillary anterior teeth.