• Journal of the Korean Applied Science and Technology
• /
• v.5 no.1
• /
• pp.41-51
• /
• 1988

Aliphatic aldehyde polyoxyethylene glycol acetals were synthesised through the reaction of aliphatic aldehydes such as caproic aldehyde, capryl aldehyde, capric aldehyde and lauric aldehyde with excess diethylene glycol, triethylene glycol and tetraethylene glycol, respectively. The acetal formation, in which water was azeotropically distilled by adding benzene to the reaction system, was gained a good yield of acetal type compounds. This reaction is found pseudo first order reaction at various temperatures such 70, 80, 90 and $97^{\circ}C$. Also these activation energies of reaction of acetal type products such as caproic aldehyde diethylene glycol acetal, capryl aldehyde diethylene glycol acetal, capric aldehyde diethylene glycol acetal, lauric aldehyde diethylene glycol acetal, caproic aldehyde triethylene glycol acetal and caproic aldehyde tetraethylene acetal were 17.3, 19.6, 21.2, 21.6, 15.5 and 14.7 Kcal/mole.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.211-218
• /
• 2007

Based on the Benzoflex (Vesicol Chemical Co.) as PVC plasticizer substituents for Di-n-octyl phthalate (DOP), a series of new aromatic carboxylic acid ester compounds were designed as plasticizers, synthesized, and screened for the endocrine disrupting activity. 2-Hydroxybenzoic acid (1) and 2-methoxybenzoic acid (2) as the commercially available starting materials were reacted with diethylene glycol (3) in the presence of p-toluenesulfonic acid using Dean-Stark column to give diethylene glycol di-(2-hydroxy)benzoate (4, KH01) and diethylene glycol di-(2-methoxy)benzoate (5, KH02), respectively. And diethylene glycol di-(3-pyridinyl) ester (7, KH03) and dipropylene glycol di-(3-pyridinyl) ester (9, KH04) were obtained in high yields by treatment of nicotinoyl chloride (6) with diethylene glycol (3) and dipropylene glycol (8) in the presence of triethylamine as a base. To determine the estrogenic disrupting effect of new synthetic phthalate analogues, E-screen assay method was used. Of these compounds, 4 (KH01) was found to be compound without endocrine disrupting effect.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.68-74
• /
• 1969

Flourination of Ethyl, ${\alpha},{\beta$}-dichloro-${\beta$}-phenyl propionate, Ethyl ${\alpha},{\beta$}-dibromo ${\beta$}-phenyl propionate, Ethyl ${\alpha},{\beta$}-dichloro ${\beta$}-(p-chloro-phenyl) propionate, and dibromostyrene by potassium fluoride were investigated in presence of dimethyl formamide, diethylene glycol, and diethylene glycol monomethyl-ether. The reactivity of these organic halogen esters and hydrocarbons towards potassium fluoride was checked further by means of radioactive fluorine-18. tracer. Generally, the reaction gave monofluoride together with dehalogenated olefin. The formation of olefine was increased when the reaction was done at high reaction temperature in presence of diethylene glycol, whereas the lower reaction temperature in presence of diethyleneglycol monomethyl ether favored the formation of mono fluoride in a good yield. The procedures and methods of the identification of monofluorides were described and the feasibility of this reaction of fluorine containing ester including the F-18 labelled compounds was discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.233-239
• /
• 2009

A reaction device raising a generation yield by efficiently removing water generated in an esterified reaction between diethylene glycol monoethyl ether and succinic acid with mixture of an azeotropic point was newly developed as a new product in development of more stabilized emulsifier with a semi-solid phase(cream) in an emulsified phase of interfacial activity. The bis-(diethylene glycol monoethyl ether succinate(hereinafter, called as BDGS) with a high yield of more than 95% was obtained. As this has a property containing amphoteric emulsified functions such as W/O type or O/W type, etc., and has a merit that can be used regardless of any emulsified phase, there is no need using other emulsified surfactant. therefore, as this has excellent skin wetability in the cosmetics industry, a product having a wider range in quality compatibility or cost saving, etc. as a humectant has been developed.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.806-808
• /
• 2004

A gas chromatography/mass spectrometric assay method has been developed for the simultaneous determination of icing inhibitors, ethylene glycol monomethyl ether and diethylene glycol monomethyl ether in ground water contaminated with JP-8. Ethylene glycol monobutyl ether and ethylene glycol monoethyl ether were used as the internal standard and surrogate, respectively. 100 mL of ground water was extracted twice with 20 mL of methylene chloride. The extract was concentrated to dryness, dissolved with 100 ${\mu}$L of methanol and analyzed by GC-MS (SIM). The use of an Innowax column gave the peaks good chromatographic properties, and the extraction of these compounds from samples gave recoveries of about 50% with small variations. The method detection limits of the target compounds were in a range of 0.5-0.8 ng/mL in ground water.

• Cement
• /
• s.130
• /
• pp.26-34
• /
• 1993

For the purpose of increasing the quality of products and reducing the grinding cost of cement clinker, some aids were studied. Some of common grinding aids, such as Ethylene Glycol, Diethylene Glycol, Triethanolamine and so on, lead to the environmental

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.253-261
• /
• 2015

The kinetics of the transesterification of dimethyl terephthalate (DMT) with diethylene glycol (DEG) was studied in a batch reactor. bis-hydroxyethoxytethyl-terephthalate (BHEET), which is polyester polyol monomer, can be produced by the transesterification reaction. Zinc acetate was used as a catalyst. Previous kinetic studies was carried out in a semi-batch reactor where generated methanol was removed so that reverse reactions were not considered in the kinetic expressions, resulting in inaccuracy of the kinetic model. Mathematical models of a batch reactor for the tranesterification reaction, which took the reverse reaction into account, were developed and used to characterize the reaction kinetics and the composition distribution of the reaction products. More accurate models than previous ones were obtained and found to have a good agreement between model predictions and experimental data. Effect of process variables on the esterification reaction was investigated based on the experimental and simulation results.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.16-22
• /
• 2016

Auto ignition characteristic is an important factor for handling combustible substance and fire prevention. This research studied about auto ignition characteristic and activation energy of Ethylene Glycol (EG) and Diethylene Glycol (DEG) by using ASTM D2155 type ignition temperature measuring apparatus. As the auto ignition temperatures, it was possible to get $434^{\circ}C$ for EG within sample amount range of $75{\sim}160{\mu}l$ and $387^{\circ}C$ for DEG within sample amount range of $130{\sim}150{\mu}l$. Also, it was possible to get $579^{\circ}C$ and $569^{\circ}C$ as instantaneous ignition temperatures with sample amount of $140{\mu}l$ for EG and DEG respectively. By using least square method from Semenov equation on measured ignition temperature and ignition delay time from this study, it was possible to calculate activation energy of EG as 25.41 Kcal/mol and DEG as 14.07 Kcal/mol. Therefore, it was possible to claim that DEG has more risk of auto ignition since the auto ignition temperature, instantaneous ignition temperature and activation energy of DEG is lower than EG.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.595-602
• /
• 2005

In order to purify diethylene glycol as main impurity included in p-dioxanone, SLE (solid-liquid equilibria) and mixture density on two components system of p-dioxanone and diethylene glycol were measured and a layered melt crystallization with seed has been applied. The SLE of p-dioxanone and diethylene glycol were a simple eutectic system and the temperature and PDX concentration at eutectic point were 0.08 and 246 K, respectively. Densities of their binary mixtures were well fitted by the best correlation equation, ${\rho}_l=0.405+1.361x+0.002T-0.004xT$. In the melt crystallization, the growth rate (G) was proportional to the 1.5th power of the subcooling degree. The effective distribution coefficient ($K_{eff}$) as the degree of impurity removal was observed to increase with increasing the growth rate and initial p-dioxanone concentration. And also, $K_{eff}$ was correlated with Z function using Wintermantel's model such as $K_{eef}=-0.0604+6.392{\times}Z$. Finally, PDX purity through the optimization of this process can be obtained over 99%.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.95-97
• /
• 2008

In this study eco-friendly wax remover for printing table of flat screen was investigated. Seven organic solvents, diethylene glycol monomethyl ester, triethylene glycol monomethyl ester, triethylene glycol monobutyl ester, tripropylene glycol monomethyl ester, dimethyl sulfoxide(DMSO), trichloro ethylene(TCE), tolune, were used as resin wax remover. The resin wax solubility with solvents was investigated. DMSO was found to be the most suitable eco-friendly resin wax remover.