• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.2
• /
• pp.33-38
• /
• 2003

Fluorinated amorphous carbon thin films (a-C:F) for the use of low dielectric constant intermetallic layer dielectrics are deposited by plasma enhanced chemical vapor deposition with $C_4$F$_{8}$ and Si$_2$H$_{6}$/He gas mixture as precursors. To characterize and improve film properties, we changed various conditions such as deposition temperature, and RF power, and we measured the thickness and refractive indexes and FT-IR spectrum before and after annealing. At low temperatures the film properties were very poor although the growth rate was very high. On the other hand, the growth rate was low at high temperature. The growth rate increased in accordance with the deposition pressure. The dielectric constants of samples were in the range of 1.5∼5.5∼5.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1085-1089
• /
• 2002

The circular cavity resonator which can measure the dielectric properties of dielectrics in the Ka-band(26.5GHz∼400Hz) frequency range was designed and fabricated. A structure of the resonator is divided into two equal parts of the length and the dielectric plate sample is placed between two halves. Exciting and detecting of the resonator is Performed by WR28 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample, whose performance is known to be 13 in millimeter wave range, was used for the verification of the performance of the fabricated circular cavity resonator In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant TE$\sub$011/ mode, the permittivity and Q${\times}$f$\sub$0/ were measured as 26.69GHz, 12.9 and 124,000GHz, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.313-314
• /
• 2006

$BiNbO_4$ ceramics were sintered under the presence of zinc-borosilicate(ZBS) glass and resultant microwave dielectric properties were investigated with a view to applying the composition to LTCC technology. The addition of 5~20 wt% ZBS glass ensured successful sintering below $900^{\circ}C$. In general, increased addition of ZBS glass increased sinterability and temperature coefficient of resonant frequency(${\tau}_f$), but it decreased the dielectric constant(${\varepsilon}_r$) and quality factor($Q{\times}f_0$) significantly due to the formation of an excessive liquid. The sintered $BiNbO_4$ ceramics at $900^{\circ}C$ with 15 wt% ZBS glass demonstrated 25 in dielectric constant(${\varepsilon}_r$), 3,700 in quality factor($Q{\times}f_0$), and -32 $ppm/{\circ}C$ in temperature coefficient of resonant frequency(${\tau}_f$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.211-213
• /
• 2008

The TFTs from ZnO semiconductor with hafnium oxide dielectrics were prepared by atomic layer deposition to characterize the electrical properties. Good electrical properties of oxide TFT was obtained with channel mobility of $2.1\;cm^2/Vs$, threshold voltage of 0 V, the subthreshold slope of 0.9 V/dec, and on to off current ratio of $10^6$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.381-381
• /
• 2010

$(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility inachieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFET channel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric films on p-Si (100) were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gapswere obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of $ZrO_2$. In addition, The dielectric function (k, $\omega$), index of refraction n and the extinction coefficient k for the $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-$\varepsilon$(k, $\omega$)-REELS software package. These optical properties are similar with $ZrO_2$ dielectric thin films.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.551-554
• /
• 2011

One of the key issues in the research of organic field-effect transistors (OFETs) is the low-voltage operation. To address this issue, we synthesized poly(styrene-r-benzocyclobutene-r-methyl methacrylate) (P(S-r-BCB-r-MMA)) as a thermally cross-linkable gate dielectrics. The P(S-r-BCB-r-MMA) showed high quality dielectric properties due to the negligible volume change during the cross-linking. The pentacene FETs based on the 34 nm-thick P(S-r-BCB-r-MMA) gate dielectrics operate below 5 V. The P(S-r-BCB-r-MMA) gate dielectrics yielded high device performance, i.e. a field-effect mobility of $0.25cm^2/Vs$, a threshold voltage of -2 V, an sub-threshold slope of 400 mV/decade, and an on/off current ratio of ${\sim}10^5$. The thermally cross-linkable P(S-r-BCB-r-MMA) will provide an attractive candidate for solution-processable gate dielectrics for low-voltage OFETs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1572-1578
• /
• 2008

The effect of the organoclay_10A nanoparticles on the DSC and Structural and Dielectrics Properties(1Hz-1MHz) for epoxy/Organoclay_10A Nanocomposites has been studied. Dielectric properties of epoxy-Organoclay nanocomposites were investigated at 1, 3, 5, 7, 9 filler concentration by weight. Epoxy nanocomposites samples were prepared with good dispersion of layered silicate using power ultrasonic method in the particles. As structural analysis, the interlayer spacing have decreased with filled nanoparticles contents increase using power ultrasonic dispersion. The maximum increase interlayered spacing was observed to decease for above 5wt% clay loading. The other hand, as decrease with concentration filler of the layered silicate were increased dispersion degree of nanoparticles in the matrix. The interesting dielectric properties for epoxy based nanocomposites systems are attributed to the large volume fraction of interfacesin the bulk of the material and the ensuring interactions between the charged nanoparticle surface and the epoxy chains.

• Korean Journal of Materials Research
• /
• v.2 no.4
• /
• pp.285-292
• /
• 1992

Ultrathin(8nm) oxynitride (SiOxNy) film have been formed on Si(100) by rapid thermal processing(RTP) in $O_2$and $N_2$O as reactants. Compared with conventional furnace $O_2$ oxide, the oxynitride dielectrics shows better characteristics of I-V and TDDB, and less flat-band voltage shift. The oxynitride has a behavior of Fowler-Nordheim tunneling in the region of V 〉${\varphi}_0$ simialr to pure Si$O_2$oxide. The relative dielectric constant of oxynitride is higher than that of conventional pure oxide. Excellent diffusion harrier property to dopant(B$F_2$) is also observed. Nitrogen depth profiles by SIMS, AES, and XPS show nitrogen pile - up at Si$O_2$/Si interface, which can explain the improved properties of oxynitride dielectrics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.67-67
• /
• 2009

Due to the scaling down of the dielectrics thickness, the leakage currents arising from electron tunneling through the dielectrics has become the major technical barrier. Thus, much works has focused on the development of high k dielectrics in both cases of memories and CMOS fields. Among the high-k materials, $Al_2O_3$ considered as good candidate has been attracting much attentions, which own some good properties as high dielectric constant k value (~9), a high bandgap (~2eV) and elevated crystallization temperature, etc. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of BClxOy compound. In this study, the etch characteristic of ALD deposited $Al_2O_3$ thin film was investigated in $BCl_3/N_2$ plasma. The experiment were performed by comparing etch rates and selectivity of $Al_2O_3$ over $SiO_2$ as functions of the input plasma parameters such as gas mixing ratio, DC-bias voltage and RF power and process pressure. The maximum etch rate was obtained under 15 mTorr process perssure, 700 W RF power, $BCl_3$(6 sccm)/$N_2$(14 sccm) plasma, and the highest etch selectivity was 1.9. We used the x-ray photoelectron spectroscopy (XPS) to investigate the chemical reactions on the etched surface. The Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.36.2-36.2
• /
• 2009

Low dielectric materials have been great attention in the semiconductor industry to develop high performance interlayer dielectrics with low k for Cu interconnect technology. In our study, the dielectric properties of SiOC /SiO2 thin film derived from polyphenylcarbosilane were investigated as a potential interlayer dielectrics for Cu interconnect technology. Polyphenylcarbosilane was synthesized from thermal rearrangement of polymethylphenylsilane around $350^{\circ}C{\sim}430^{\circ}C$. Characterization of synthesized polyphenylcarbosilane was performed with 29Si, 13C, 1H NMR, FT-IR, TG, XRD, GPC and GC analysis. From FT-IR data, the band at 1035 cm-1 is very strong and assigned to CH2 bending vibration in Si-CH2-Si group, indicating the formation of the polyphenylcarbosilane. Number average of molecular weight (Mn) of the polyphenylcarbosilane synthesized at $400^{\circ}C$ for 6hwas 2, 500 and is easily soluble in organic solvent. SiOC/SiO2 thin film was fabricated on ton-type silicon wafer by spin coating using 30wt % polyphenylcarbosilane incyclohexane. Curing of the film was performed in the air up to $400^{\circ}C$ for 2h. The thickness of the film is ranged from $1{\mu}m$ to $1.7{\mu}m$. The dielectric constant was determined from the capacitance data obtained from metal/polyphenylcarbosilane/conductive Si MIM capacitors and show a dielectric constant as low as 2.5 without added porosity. The SiOC /SiO2 thin film derived from polyphenylcarbosilane shows promising application as an interlayer dielectrics for Cu interconnect technology.