• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.37-45
• /
• 2002

We described a method of resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equations are solved using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult mode identification. The analysis is based on the approximated electromagnetic representation which is only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies has not been covered. However, It is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies using the contour graph method. The contour graph method is not a method using approximated representation of electromagnetic field variation at the outer area of dielectric in the resonators. It is a method using enact representation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.791-794
• /
• 2001

We described a method resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equation is solved by using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult a mode identification. The analysis based on the approximated electromagnetic representation. This kinds of studies only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies have not been covered. But, the contour graph method to analyze the characteristic equations is simple and all parts of resonant frequency graph can be easily drawn, it is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1420-1427
• /
• 2000

유전체 디스크가 삽입된 원통형 공동 공진기의 전자계 해와 공진주파수를 구하는 방법을 기술하였다. 유전체 디스크가 삽입된 원통형 공동 공진기의 공진주파수는 특성방정식의 해석에 의해 계산된다. 특성방벙식의 해를 Mathematica의 ContourPlot graph를 이용하여 구하였다. 공진기의 높이를 증가시키면서 계산한 공진주파수와 실험 값의 공진주파수를 비교하였다. 계산결과가 실험값과 거의 일치하는 것을 볼 수 있었다. 공진기 윗면과 동심 유전체 디스크 사이가 근접할 경우 0.2%의 공진주파수 오차를 나타내었고, 공진기 윗면과 동심 유전체 디스크 사이가 멀어짐에 따라 최대 1.6%의 공진주파수 오차를 나타내었다.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1051-1061
• /
• 2004

본 논문에서는 반원형 및 반타원형 디스크가 급전점에 수직으로 로딩된 단순한 광대역 모노폴 안테나 구조에 급전점에는 추가적인 공진 구조를, 수직 모노폴 안테나의 끝단에는 수평으로 추가적인 소형 디스크가 로딩되는 초광대역 안테나의 특성에 관하여 시뮬레이션과 측정이 수행되었다. 설계된 초광대역 송신용 안테나로부터 가우시안 펄스의 전달 특성에 관하여 살펴보며 제안된 안테나의 수평방향을 단면으로 보았을 경우의 복사패턴이 등방향성 응답을 가짐을 알 수 있었다. 더욱이, 측정 및 시뮬레이션 결과로부터 소형이면서 광대역 특성을 보임을 알 수 있다. 제안된 수평방향의 소형 디스크가 장착된 반원형 디스크 모노폴 안테나의 측정결과로부터, 크기와 전기적인 성능 측면에서 살펴보았을 때 제안된 구조가 단순히 원형 디스크가 수직으로 로딩된 모노폴 안테나에 비해 견줄만 함을 알 수 있었다. 특히 본 논문을 통하여 제작된 안테나는 PCB를 이용한 프린팅 안테나에서 자주 발생되는 표면파 손실 및 유전체 손실과 같은 현상이 발생되지 않으므로 Return Loss의 성능이 곧 복사되는 효율과 밀접한 관계가 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1466-1468
• /
• 1996

The standards of the capacitance arc measured and analyzed by the dry nitrogen or mica film as a dielectric. In this paper, respectively the standard capacitors of 10 pF and 100 pF for the establishment of the dielectric loss tangent are made by $Al_{2}O_{3}$ crystal disc with the low dielectric loss tangent, and then measured the dielectric loss tangent with precision. To regard for the existence of capacitances just in the dielectric, 3-terminal configuration electrode is used. With using the 2D electric field simulator, precise design values are derived in addition to stray capacitance. As stated above method, respectively the standards of the capacitances with 10 pF and 100 pF arc made with the low dielectric loss tangent less than $10^{-4}$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.285-290
• /
• 2004

Electro-active polymer, one of smart materials, is a new alternative technology, which can get an ultra precision movements and bio-compatibilty. This paper presents the relationship between elastic modulus and maximum deflection as a key property of maxwell stress effects and also presents the relationship between dielectric constant and maximum deflection as a key property of electro-striction effects in disc-type actuators using segmented PU. To induce equation about distributed load of a disc, we use boundary condition of fully clamped circular plate and to obtain design parameters of a micro-fluidics system, CFD simulation is performed.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.301-303
• /
• 2009

This paper presents a basic data of the surface discharge characteristics of solid dielectric in various gas including $SF_6$ and environmentally friendly gas as Dry-Air and $N_2$ gas. Used electrodes are needle and plane. Used solid dielectric which is installed between the electrodes is made of epoxy resin and is disc form of 100[mm] diameter and 2, 3[mm] thickness. AC In same condition, we can obtain different surface dielectric strength. Increased pressure and thickness caused increased surface dielectric strength.

• 한국통신학회논문지
• /
• 제11권1호
• /
• pp.48-52
• /
• 1986

유전체 공진기를 실제로 사용할 때 발생하는 여러가지 영향을 고려한 원통형 유전체공진기의 공진주파수 및 field계수를 결정하기 위한 보다 효율적인 수치해석법과 컴퓨터프로그램을 개발했다. 이 새로운 해석법에는 차폐금속면, 마이크로스트림 substrate, 유전체지지대 및 유전체공진기의 제작시 발생되는 허용오차를 보상하기 위한 유전체 post 등의 영향이 고려됐다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.283-286
• /
• 2000

In this study, the acoustic transducer of a thin circular disc-type with PZT/Metal was manufactured. The piezoelectric transducer with 200kHz resonance frequency was designed by considering the sharp directivity and the sound pressure. The dielectric and piezoelectric properties of 0.5 weight percent $MnO_2$ and NiO doped $0.1Pb(Mg_{1/3}Nb_{2/3})O_3-0.45PbTiO_3-0.42PbZrO_3$ ceramics were investigated aiming at acoustic transducer applications. Also, the acoustic characteristics of a thin circular disc-type with metal-piezoceramics have been Investigated.