• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.7
• /
• pp.279-286
• /
• 2002

Linear and nonlinear complex permittivities were measured for copolymers of vinylidene cyanide(VDCN) with vinyl acetate(VAc), vinyl propionate(VPr), vinyl bezoate(VBz), styrene(St) and methyl methacrylate(MMA). Experimental results are well fitted by the function (equation omitted) except at low frequency where dc conduction dominates. The analysis of dielectric relaxation mechanism by combined knowledge about linear and nonlinear dielectric permittivities and dipoles give us informations about electrical and thermal motions in these copolymers. According to the analysis it could be found that the variation for temperature of the dielectric relaxation strength in these copolymers is related to the interaction between dipoles and the nonlinear dielectric effect factor R$_{s}$ is proportional to square of the dipolar correlation factor R$_{p}$././.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.484-487
• /
• 2000

This study is for assessing a reliability of diagnostic device through comparing diagnostic results to ACDB strength. The dielectric diagnosis using IRC (isothermal relaxation current) measurement was carried on service-aged cables. From this study, there was little correlation between dielectric diagnosis and ACBD strength in long distance cables. But the correlation between them showed in short distance below 200 m. Therefore, it is desirable to diagnose the URD cables in short distance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.87-87
• /
• 2010

Epoxy/mica has been used as the material of high-voltage rotator stator winding due to its high insulation performance, mechanical strength, and thermal stability. In recent years, however, it shows frequent changes in the load of generators and frequent automatic stops due to the significant increase in peak loads from the increase in the applied load of power facilities according to the introduction of advanced and high-technology equipments. Thus, it is necessary to develop new materials that highly develop the conventional insulation materials. Nanotechnology introduced in the present time has become an alternative plan that overcomes such technical limitations. In addition, the nano-scaled intercalation composite has been known as the material that represent excellent electrical, mechanical, and thermal characteristics compared to the conventional materials. This study investigated the dielectric dispersion and relaxation characteristics of the nanocomposite, which was fabricated by mixing epoxy matrix with nano-scaled intercalation mica and clay, according to changes in frequencies and temperatures.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.1-5
• /
• 2000

We have investigated dielectric properties of IMI-O LB films for the effect of complex concentration by electrical conductivity, dielectric constant and dielectric relaxation time at different frequencies. In the surface pressure-area$\pi$-A) isotherms for the increase of $FE^{3+}$ concentration, the molecular area was expanded with $FE^{3+}$concentration increase by electrostatic repulsion between the polymer chains and hydrophobic increase of ionic strength. In the I-V characteristics, it is found that the limiting area has effects on the change of conductivity And, the dielectric relaxation time decreased for increase of the $FE^{3+}$concentration.

• Korea-Australia Rheology Journal
• /
• v.14 no.3
• /
• pp.129-138
• /
• 2002

A cationic surfactant, cetyltrimethylammonium $\rho$-toluenesufonate (CTA$\rho$TS), forms long threadlike micelles in aqueous solution. The threadlike micelles make concentrated entanglement networks, so that the solution shows pronounced viscoelastic behavior as concentrated polymer systems do. However, a mechanism for a process responsible for the longest relaxation time of the threadlike micellar system is different from that of semi-dilute to concentrated polymer systems. The threadlike micellar system exhibits unique viscoelasticity described by a Maxwell model. The longest relaxation time of the threadlike micellar system is not a function of the concentration of CTA$\rho$TS, but changes with that of $\rho$-toluenesufonate ($\rho$$TS^{-}$) ions in the bulk aqueous phase supplied by adding sodium $\rho$-toluenesulfonate (NapTS). The rates of molecular motions in the threadlike micelles are not influenced by the concentration of $\rho$$TS^{-}$ anions, therefore, molecular motions in the threadlike micelles (micro-dynamics) are independent of the longest relaxation mechanism (macro-dynamics). A nonionic surfactant, oleyldimethylamineoxide (ODAO), forms long threadlike micelles in aqueous solution without any additives. The aqueous threadlike micellar system of ODAO also shows Maxwell type viscoelastic behavior. However, the relaxation mechanism for the longest relaxation process in the system should be different from that in the threadlike micellar systems of CTA$\rho$TS, since the system of ODAO does not contain additive anions. Because increase in the average degree of protonation of head groups of ODAO molecules in micelles due to adding hydrogen bromide causes the relaxation time remarkably longer, changes in micro-structure and micro-dynamics in the threadlike micelle are closely related to macro-dynamics in contrast with the threadlike micellar system of CTA$\rho$TS.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.356-358
• /
• 1989

Linear and nonlinear complex permittivities have been measured for an alternating copolymer of vinylidene cyanide(VSCN) with vinyl propionale(VPr). It is found that the third order permittivity ${\varepsilon}_3$ depends upon frequency according to a function V ${\varepsilon}_3$/ ${1+(j{\omega}{\tau}_3)^{\beta}}^3$ while the linear permittivity ${\varepsilon}_1$obeys a Debye type function ${\nabla}{\varepsilon}_1$/ {1+$(j{\omega}{\tau}_1)^{\beta}$}. Experimental results are well fitled by predicted functions except at low frequency where dc conduction dominates. The relaxation times ${\tau}_1$ and ${\tau}_3$ at same teperature are nealy equal and depend upon temperature according to WLF form. The relaxation strengths ${\nabla}{\varepsilon}_1$ and ${\nabla}{\varepsilon}_3$ have a peak at the vicinity of glass transition temperature (Tg). The strength ${\nabla}{\varepsilon}_1$ has a value of -9 order and ${\nabla}{\varepsilon}_3$ has a negative value of -25 order. The analysis of mechanism by combined knowledge about linear and nonlinear permittivities and dipole moment gives us an imformation of the electrical and thermal dipolar motions in this copolymer.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.44-51
• /
• 1999

The electrical conduction mechanism of high dielectric $(Ba,Sr)TiO_3$ (BST) thin film capacitor, which is the promising cell capacitor for high density DRAM, was investigated in low field region (<0.2MV/cm). It is known that the current in the low field region consists of dielectric relaxation current and leakage current. The current-time (I-t) measurement technique under the constant voltage was used for extracting successfully each current component. The conduction mechanism of the BST capacitor was deduced from the dependency of the current on the measurement temperature, strength of electric field, the polarity of applied electric field and post annealing process. From these results, it was suggested that the dielectric relaxation current and the leakage current are originated from the redistribution of internally trapped electron by hopping process and Pool-Frenkel conduction mechanism, respectively. It was also concluded that traps causing these two current components are due to oxygen vacancies within the BST film.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1563-1565
• /
• 1999

Linear and nonliear complex permittivities have been measured for amorphous copolymers of vinylidene cyanide (VDCN) with vinyl acetate (VAc), vinyl propionate (VPr), vinyl benzoate (VBz), styrene (St) and methyl methacrylate (MMA). It is found that the third order permittivity ${\varepsilon}_3$ depends upon frequency according to a function ${\Delta}_{{\varepsilon}_3}/(1+i{\omega}{\tau}_^3)$ while the linear permittivity obeys a Debye function ${\Delta}_{{\varepsilon}_1}/(1+i{\omega}{\tau}_1)$. Experimental results are well fitted by the above predicted functions except at low frequencies where dc conduction dominates. The ${\tau}_1$ and ${\tau}_3$ are nearly equal, and depend upon temperature according to a WLF form. The relaxation strength ${\Delta}_{{\varepsilon}_1}$ depends upon comonomers ranging from $130_{{\varepsilon}_0}$(VAc) to $20{{\varepsilon}_0}$(MMA). The ${\Delta}_{{\varepsilon}_3}$ is negative and depends more strongly upon comonomers. Combined knowledge about linear and nonlinear permittivities predicts very large correlation factors which indicates strongly cooperative dipolar motions in those amorphous copolymers.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1711-1713
• /
• 2000

We fabricated an IMI-O polymer containing an imidazole group that could form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the surface analysis and the electrical properties of metal ion complex of Langmuir-Blodgett (LB) films were investigated by using $\pi$-A isotherms. Atomoic force microscopy (AFM), current-voltage (I-V) measurements. In the $\pi$-A isotherms the molecular area was expanded with $Fe^{3+}$ concentration increase. It is considered that the expansion of molecular area is due to electrostatic repulsion between the polymer chains and hydrophobic increase of ionic strength. In the I-V characteristics, it is found that the limiting area has effects on the change of conductivity. And, the dielectric relaxation time decreased for increase of the $Fe^{3+}$ concentration.