• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.460-465
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$(x=1.10,0.15,0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of he composition ratio and sintering temperature were studied. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around 102$0^{\circ}C$ due to the formation of the polycrystalline perovskite phase. The BSCT(50/40/10) specimen sintered at 150$0^{\circ}C$ showed the highest average grain size(18.25${\mu}{\textrm}{m}$). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 145$0^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively.ively.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.938-944
• /
• 1995

Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.

• 한국융합학회논문지
• /
• 제6권5호
• /
• pp.9-14
• /
• 2015

본 논문에서는 유전체 표면을 소형의 패치로 분해한 다음에 각 패치의 유도전류를 구하는 모먼트법(MoM)과 전체 유전체 표면의 입사전파와 반사 및 침투 전파의 합을 구하는 적분방정식을 융합하여 유전물질로 구성된 육면체의 유도전류 분석하였다. 평면파 전자파가 입사될 때 임의모형의 유전체에 유도되는 유도전류는 일반적으로 수치해석방법을 적용하여 계산하는 것이 정확하며 사용한 적분방정식은 5 명의 과학자가 공동으로 제안한 PMCHW 방정식을 사용하였다. MoM에 사용된 패치는 삼각형 패치를 사용하고 기초함수는 광대역 주파수에 사용할 수 있는 Loop-Patch 기초함수를 사용하였다. 제안된 계산방식은 넒은 주파수 범위에서 임의 모형의 유전체에 대해서 적용할 수 있으며 유전체 육면체의 유도전류를 분석하여 제시하였다.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.257-262
• /
• 2011

Dependencies of dielectric properties on $MgTa_2O_6$, $MgNb_2O_6$, and $MgWO_4$ (Mg-based ceramics) fillers of the polystyrene (PS) matrix composites were investigated as a function of frequency. With increasing frequency from 1 GHz to 7.3 GHz, the dielectric constant (K) of the composites was not changed significantly, while the dielectric loss (tan${\delta}$) of the composites was slightly decreased. The K, tan${\delta}$, and temperature coefficient of resonant frequency (TCF) of the composites were dependent on the type and amount of ceramics at 11 GHz. Also, several theoretical models have been employed to predict the effective dielectric constant of the composites and the results were compared with experimental data. Typically, a K value of 6.67, tan${\delta}$ of $0.56{\times}10^{-3}$, and TCF of -4.99 $ppm/^{\circ}C$ were obtained for the PS composites with 0.4 volume fraction of $MgNb_2O_6$ at 11 GHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.105-107
• /
• 1988

The dielectric properties of complex perovskite compound Sr$(Mg_{1/3}Mb_{2/3})$$O_3$-Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$(BMN) system were investigated as a function of composition and sintering time. In the case of the specimens sintered at $1650^{\circ}C$ for same time, dielectric constant and dielectric loss were increased with increasing the mole ratio of BMN. The maximum temperature coefficient of resonant frequency was found in composition Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$. In the case of the specimens with same composition, dielectric constant and dielectric loss were slightly increased with increasing the sintering time. As the sintering time was increased, the temperature coefficient of resonant frequency for SMN was slightly increased, however, that of BMN and ($Sr_{1/2}Ba_{1/2}$) ($Mg_{1/3}Ta_{2/3}$)$O_3$ was largely depended on sintering time.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.29-33
• /
• 2005

In this paper, reflectance and the dielectric characteristics for $P_2O_5-ZnO-BaO$ system and $SiO_2-ZnO-B_2O_3$ system have been investigated as a function of contents of $TiO_2$. The reflectance was decreased with increasing the contents of $TiO_2$ and the reflectance of $P_2O_5-ZnO-BaO$ system was lowered than that of $SiO_2-ZnO-B_2O_3$ system. The dielectric constant of $P_2O_5-ZnO-BaO$ system was higher than $SiO_2-ZnO-B_2O_3$ system, and the dielectric constant in the both system was increased with increasing of $TiO_2$ contents. This can be explained as the space charge effects. These results are could be applied to the under plate dielectrics of PDP required high reflective ratio and breakdown strength.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.320-324
• /
• 2015

Mutual coupling between antenna elements of a linear microstrip patch antenna array positioned along the H-plane including the effect of edge reflections is investigated. Simple formulas are presented for the estimation of the grounded dielectric substrate size with minimum mutual coupling. The substrate sizes calculated by these formulas are in good agreement with those obtained by the full-wave simulation and experimental measurement. The substrate size with minimum mutual coupling is a function of the effective dielectric constant for surface waves and the distance between the antenna centers. The substrate size with minimum mutual coupling decreases as the effective dielectric constant for surface waves on a finite grounded dielectric substrate increases.

• 전자공학회논문지A
• /
• 제30A권7호
• /
• pp.26-31
• /
• 1993

We have analyzed shielding characteristics of the spherical multilayered dielectric, with the assumption that the inner part of the model is filled with the perfect conductor whose radius is varied from 0.2.lambda. to 1.0.lambda. and the outer part of the conducting sphere is covered by a lossy multilayered dielectric. Variation of shielding effects have been examined as the function of parameter of the dielectric layer and the radius of the conducting sphere.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.64-68
• /
• 1990

Boundary element method using linear basis function is applied to obtain fields scattered from a 3-D dielectric sphere. Electric field integral equation is used on the surfaces of the dielectric material where its surface is discretized into trilateral cells. For plane wave incidence, scattered fields by a dielectric sphere is calculated and compared with its analytic solution. The total electric fields are calculated on the great circle of the sphere boundary as well as the outside of the sphere in the plane of the wave vector and the polarization vector of the incident electric field.

• 한국세라믹학회지
• /
• 제22권2호
• /
• pp.63-67
• /
• 1985

$BaTiO_3$ and $SrTiO_2$ were mixed with the mole ratio of 36:65:50, 50: 50 and 65:35 and then heated at 110$0^{\circ}C$~130$0^{\circ}C$ for 1~64 hrs. The solid state reactions and dielectric properties were investigated as a function of amount of solid solution. Activation energy of solid solution decreased with increasing amount of $BaTiO_3$ due to fast diffusion of $Ba^{2+}$ ions. Dielectric constants increased with increasing the soaking time at 125$0^{\circ}C$and 130$0^{\circ}C$ and Curie Temperature shifted to higher temperature with increasing the soaking time at 125$0^{\circ}C$ and 130$0^{\circ}C$. It attributes to the am-ount of solid solution and grain growth, Dielectric constants decreased and Curie Temperature shifted to lower temperature due to decreasing polari-zability.