• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.449-455
• /
• 2022

The Colony of Selaginella involvens (Sw.) Spring in Sanyang-myeon, Mungyeong-si, can be divided into five types, and in the past, it was said that Selaginella involvens (Sw.) Spring formed colonies throughout the colony and grew naturally, but now it remains only in some sections. It was found that the Selaginella involvens (Sw.) Spring colony was damaged by artificial and natural factors, and as an artificial factor, the Selaginella involvens (Sw.) Spring was proven to be effective for medicinal and cremation, and many people were damaging the Selaginella involvens (Sw.) Spring colony without permission. Naturally, vines thrive and Selaginella involvens (Sw.) Spring die, and the reality is that the entire colony of Selaginella involvens (Sw.) Spring is in danger of being damaged if maintenance is not performed. On the other hand, there are sections that reproduce with symbiosis with some herbaceous plants, so it is necessary to plan and implement conservation strategies. In order to preserve the Selaginella involvens (Sw.) Spring colony, CCTV is needed to prevent artificial damage, and on the contrary, install facilities such as fences can easily burn up and create worse scenery, so it can preserve the good environment, restore recoverable areas, and install supplementary buffer zones.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.33-41
• /
• 2023

Excessive use of plastic bottles contributes to a significant environmental issue due to the high volume of plastic waste generated. To address this, efforts are needed to reduce the weight of plastic bottles. However, indiscriminate weight reduction may compromise the essential rigidity required for plastic bottles. Extensive research on rib shape for pressure vessels are exists, but there is a few research of rib shapes to enhance the stiffness of plastic bottles. The following results were obtained from the analyses conducted in this study. 1) Among the rib cross-sections of square, trapezoid, and triangle, the buckling critical load of PET bottles with square-shaped ribs is improved by about 14% compared to the buckling critical load of PET bottles without ribs. 2) The buckling critical load is improved by about 18% when a square-shaped rib with an aspect ratio of 0.2 is applied, compared to the buckling critical load of the bottle without the rib. 3) When longitudinal and transverse square ribs were applied to the axial direction of the PET bottle, the buckling critical load was improved by about 32% and 58% compared to the buckling critical load of the PET bottle without ribs, respectively, indicating that applying longitudinal ribs is effective in reinforcing the stiffness of PET bottles. 4) When 14 transverse ribs were applied, the maximum improvement was about 48% compared to the buckling critical load of the plastic bottle without ribs. 5) When 3 longitudinal ribs were applied on each side, the maximum improvement was about 76% compared to the buckling critical load of the bottle without ribs. Therefore, it was concluded that for effective stiffness reinforcement of a 500ml square bottle with a thickness of 0.5mm, 3 square-shaped ribs with an aspect ratio of 0.2 should be applied in the longitudinal direction relative to the axial direction of the bottle.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.21-31
• /
• 2010

This paper presents a design of PLL and SSCG for reducing the EMI effect at the electronic machinery and tools for DisplayPort application. This system is composed of the essential element of PLL and Charge-Pump2 and Reference Clock Divider to implement the SSCG operation. In this paper, 270MHz/162MHz dual-mode PLL that can provide 10-phase and 1.35GHz/810MHz PLL that can reduce the jitter are designed for 2.7Gbps/162Gbps DisplayPort application. The jitter can be reduced drastically by combining 270MHz/162MHz PLL with 2-stage 5 to 1 serializer and 1.35GHz PLL with 2 to 1 serializer. This paper propose the frequency divider topology which can share the divider between modes and guarantee the 50% duty ratio. And, the output current mismatch can be reduced by using the proposed charge-pump topology. It is implemented using 0.13 um CMOS process and die areas of 270MHz/162MHz PLL and 1.35GHz/810MHz PLL are $650um\;{\times}\;500um$ and $600um\;{\times}\;500um$, respectively. The VCO tuning range of 270 MHz/162 MHz PLL is 330 MHz and the phase noise is -114 dBc/Hz at 1 MHz offset. The measured SSCG down spread amplitude is 0.5% and modulation frequency is 31kHz. The total power consumption is 48mW.

• Cartoon and Animation Studies
• /
• s.20
• /
• pp.75-86
• /
• 2010

Recently, as the number of female players has increased rapidly, the electronic gaming industry has begun to look at ways to appeal to the largely untapped female market. According to the latest game market investigative report by China Internet Network Information Center (CNNIC), the total number of game players in China increased by 24.8% in 2009, reached 69,130,000 people, and 38.9% of them are female players. This growth in the number of female player is corroborated by a series of investigative reports from IResearch Company in Shanghai, China: from 2003 to 2009, the number of female players grew from 8% to more than 49%. Therefore, no matter how much attention the game production companies have given to male players or how they have ignored the female players before, the companies would be sensible to face up this reality and adjust their marketing policy a bit more. This article analyzes gender preferences in video games which shows that male players are more likely to be attracted to elements of aggression, violence, competition and fast action in electronic game-playing, while female players are drawn to emotional and social aspects of the games such as an understanding of character relationships. The literatures cited indicates that female players also show apparent preference for games with familiar environments, games that allow players to work together, games that have more than one way to win, and games in which characters do not die. It also discusses the characteristics of female-friendly games from the aspect of emotion, pointing out that the simulation games involving pet, dressing-up, and social simulation games are very popular with female players. Because these are the most suitable game types to fill with emotions of love, share, jealousy, superiority, mystery, these are absolutely attractive to female players. Finally, in accord with the above, I propose some principles of designing female-oriented games, including presenting a good-looking leading character, making the story interesting with "live" NPCs(Non-Playing Characters), and finding ways to satisfy female nature instincts such as taking care of others and the inborn interest of classifying and selecting.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.