• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.565-568
• /
• 2006

This study was retentive material into the porosities of the permeable asphalt concrete, we developed retentive asphalt concrete which can absorb water in rain and decrease the temperature of the pavement through the vaporization of rainwater. The experimental results showed that the maximum stability appeared in the 5.0% types of both AP-5 and SBS PMA. Between these two types, the maximum stability of the asphalt with AP-5 was 480kg, which means it met the stability requirement for walkways but didn't meet the requirement for roadways. On the other hand, the maximum stability of the asphalt concrete with SBS PMA was 676kg, which was 176 kg higher than the requirement for roadways(500kg) and satisfy the requirement of KS. The retentive material was 56.4% in the type of the retentive material with 30% diatomaceous earth, 66.6% in 50% type, 87.5% in 70% type. In the aspect of thermal properties, the retentive asphalt concrete can lower the surface temperature by about 15 degrees lower than the normal asphalt concrete can. This effect could be made by the evaporation cooling effect and the surface albedo. It should be noted that the evaporation cooling effect cools it by about 10 degrees and the surface albedo by about 5 degrees.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.223-230
• /
• 2020

As a case study on aspect ratio behavior, Kaolin, zeolite, TiO₂, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 mm media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D₅₀, ~6 ㎛ are shifted to submicron size, D₅₀ ~0.6 ㎛ after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.264-270
• /
• 2019

As a case study on aspect ratio behavior, Kaolin, zeolite, $TiO_2$, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 pai media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ${\sim}6{\mu}m$ are shifted to submicron size, D50 ${\sim}0.6{\mu}m$, after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1188-1195
• /
• 1999

This study was conducted to determin basic mineral compositions, chemical components, description of particle size distribution and whiteness for 32 items of insoluble mineral substances, i.e., 3 items of diatomaceus earth, 1 item of kaolin, 10 items of bentonite, 13 items of acid clay, 3 items of talc and 2 items of perlite. The chemical components and XRD (X-Ray diffractometer) for insoluble mineral substances, were similar with those of the reported references except kaolin. However, whiteness was determined in 90% level for talc, diatomaceus earth and kaolin. The contents of heavy metals in insoluble mineral substances were determined as follows : Pb, $nd{\sim}23.10$ ppm ; Cd, $nd{\sim}0.67$ ppm ; Hg, $nd{\sim}0.58$ ppm ; As, $nd{\sim}1.42$ ppm ; Cu, $nd{\sim}39.35$ ppm. These data were significanty lower than the references.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.301-312
• /
• 2005

The present study investigated the physical changes and reaction products with setting time after mixing of various mineral admixtures such as lime, hydrated lime, gypsum, kaolin, zeolite and diatomaceous earth with four types of cement (portland cement, slag cement, quick lime, hydrated lime) and clay rich sediments in soft foundation. As results, slag cement showed the greater compressive strength than normal portland cement. The mixing experiments with various mineral admixtures and slag cement resulted that gypsum showed the greatest compressive strength. Additionally, we conducted mixing experiments with various mixing ratios of gypsum and slag cement. The experiments showed that the mixing ratio of $30\%$ gypum and $70\%$ slag cement has the greatest compressive strength. Ettringite was produced as a reaction Product. This fact indicates that gypsum effectively promotes hydration reaction and contributed to the greater compressive strength. These experimental results can be used as fundamental data for the stabilization of soft clay foundation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.243-257
• /
• 2003

The purpose of this study was to search the influences of the increase of the contents of sodium alginate in the experimental alginates on the some mechanical properties. 3 commercial alginates were selected for the purpose of comparison of the results of experiments. 7 experimental alginates were manufactured with the rise of contents of sodium alginate from 8.8% to 18.3% with the decrease of contents of diatomaceous earth and with the constant contents of calcium sulfate 12.5%. sodium phosphate 2.2%, zinc fluoride 2.0%. Splitable metal mold with 12.5mm diameter and 20.0mm height was filled with mixed alginate to prepare the cylinder shaped specimens. Strain in compression, elastic recovery, compressive strength were tested using the ISO specification number 1563, alginate impression material. Experimental groups were 7, and 10 specimens were used for each test items and each groups. Following results were obtained ; 1. Strain in compression was decreased with the increase of sodium alginate contents (p=0.0077, r2 = 0.6302). 2. Elastic recovery was decreased with the increase of sodium alginate contents but was not significant(p=0.0639, r2=0.7449). 3. Compressive strength was increased with the increase of sodium alginate contents (p<0.0001, r2 = 0.9617). These results mean that the increase of sodium alginate contents make alginate harder but may result the increased permanent deformation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.1-7
• /
• 2012

The increase of OCC solid content after wet pressing will save drying energy greatly. We applied spacers, which used to increase draining rate and bulk in fiber furnishes, to increase the OCC solid contents. MDF fibers (fibers for making medium density fiberboard) and diatomaceous earth were used as spacers, and added 10% by weight to the OCC fiber furnish. Application of high wet pressing pressure to the mixed furnish of spacers and refined OCC did not deteriorate bulk and drainage rate, but their solid contents were increased to 0.5-1.5% without loss of compressive strength when compared to those of unrefined OCC, which is the furnish normally used for mill commercial practice. It is believed that the spacers caused the rate of solid content increase faster in the mixed furnish with OCC at high wet pressing pressure area than the unrefined OCC furnish did. Little amount of starch addition (0.5%) to the spacers helped to keep the strength properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.564-569
• /
• 2014

This study was conducted to reduce benzo(a)pyrene in sesame oil by addition of several kinds of absorbents (active carbon, diatomaceous earth, kaolin, acid clay, perlite, and silicate). Sesame oil containing 4.1 ppb benzo(a)pyrene was stirred with 0.2% (w/w) several kinds of adsorbents at $40^{\circ}C$ for 30 min. Active carbon resulted in the highest reduction of benzo(a)pyrene in sesame oil among the investigated adsorbents, and decolorization was observed only by using silicate. Reduction of benzo(a)pyrene was optimized by controlling amount the of active carbon, stirring time, and stirring temperature. Futher, 4.1 ppb benzo(a)pyrene in sesame oil was reduced by up to 0.91 ppb by adding 0.5% (w/w) active carbon and stirring for 30 min at $70^{\circ}C$. Optimized conditions were applied to sesame oil (2.14~4.11 ppb) purchased from a Gyeonggi traditional market, and benzo(a)pyrene in sesame oil was reduced by up 0.43~0.86 ppb.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.721-730
• /
• 2002

This study was carried out to select new pelleting binder and material for Welsh onion seeds. The optimum treatments of the various plant growth regulators to improve seed germination of the Welsh onion was also estimated. There were no significant effects of growth regulators on the germination percentage, but germination was faster according to the number of days to 50% of the final germination ($T_{50}$) and the mean number of days to germination (MDG) than those of the control. Germinability was increased when the seeds were soaked in gibberellic acid ($GA_3$) solution for 24hrs, even though there was no synergy effect on the germinability when $GA_3$ was mixed with 6-benzylaminopurine (BAP). The optimum treatment for improving germination of Welsh onion was observed when the tested seeds was soaked in 500 $\mu$M of $GA_3$ at $20^{\circ}C$ for 24hrs. Also, when the seeds soaked in the aforementioned treatment, the rate of germination was increased at lower temperature than at $20^{\circ}C$, the optimal temperature. The percentage and the speed of seed germination depended on the kinds of pelleting binder and their concentration. It showed that the higher the concentration of the binder for seeds pelleting, the lower the percentage of seed germination. Among the pelleting binder, polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were the best binders for seed pelleting, because seed germination using those binder did not affect on the concentration of binder. On the other hand, Carboxymethy cellulose (CMC) and methyl cellulose (MC) severely inhibited the seed germination The germinability was also different arcording to the pelleting materials. Among the different 58 pelleting materials, kaoline alone, the mixture of bentonite and kaoline, the mixture of bentonite, calcium carbonate and diatomaceous earth #300 were found as the best pelleting materials for welsh onion seeds.