• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.174-181
• /
• 1998

Experimental and analytical studies are presented to characterize the break-up mechanism and atomization processes of the intermittent- impinging-type nozzle. Gasoline jets passing through the circular nozzle with the outlet diameter of 0.4mm and the injection duration of 10ms are impinged on each other. The impingement of fuel jets forms a thin liquid sheet, and the break-up of the liquid sheet produces liquid ligaments and droplets subsequently. The shape of liquid sheets was visualized at various impinging velocities and angles using the planer laser induced fluorescence (PLIF) technique. Based on the Kelvin-Helmholtz wave instability theory, the break-up length of liquid sheets and the droplet diameter are obtained by the theoretical analysis of the sheet disintegration. The mean diameter of droplet is also estimated analytically using the liquid sheet thickness at the edge and the wavelength of the fastest growing wave. The present results indicate that the theoretical results are favorably agreed with the experimental results. The size of droplets decreases after the impingement as the impinging angle or the injection pressure increase. The increment of the injection pressure is more effective than the increment of the impinging angle to reduce the size of droplets.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.337-344
• /
• 2022

Due to corrosion defects on the surface of the oil pipe, the sealing performance of the annular blowout preventer (BOP) decreases, and the leakage of toxic and harmful gases such as H₂S and SO₂ will threaten the safety of operators on the well. Therefore, this paper establishes the FE model for evaluating the sealing performance of BOP-oil pipe corrosion defects, which is based on the rubber large deformation theory and rubber core sealing mechanism, and designs the experiment of BOP sealing performance to verify the accuracy of the FE model. The sealing performance of BOP sealing oil pipe with corrosion defects is studied. The research results show that the sealing performance of BOP is more sensitive to the axial size of corrosion defects. With the increase of oil pipe outer diameter, the critical size of defects increases continuously. The sensitivity of radial and depth dimensions is low, When for 88.9 mm outer diameter oil pipe, the axial critical size of corrosion defect is 20 mm, the radial critical size is 16 mm and the critical depth is 2 mm. Fit the formula between the outer diameter of oil pipe and the piston increment. According to the formula, the operator can calculate the piston stroke increment required by the BOP to complete the sealing when the oil pipe is corroded.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.682-685
• /
• 2010

Coring has been widely used to measure annual increment in temperate forest ecosystems. This method is attractive because cores can be taken in just one visit. However, the accuracy of this method has not been tested. We expected coring to be less accurate than band dendrometers because of the eccentricity of tree growth. We studied 41 trees at the Long Term Experimental Forest in Mt. Gyebang, which has been monitored with band dendrometers since 1996. We collected two tree cores from the south and north face of each tree, 10 cm below the growth band. Increment cores were measured to 0.01 mm under stereomicroscopy. Annual growth from 1997 to 2006 was 3.2 mm $yr^{-1}$ for Quercus mongolica, 3.5 mm $yr^{-1}$ for Kalopanax septemlobus, and 5.7 mm $yr^{-1}$ for Pinus densiflora. The difference between the two methods was 10% for Q. mongolica, 14% for K. septemlobus, and 4% for P. densiflora. Compaction in the corer and shrinkage during drying decreased diameter increment by 5.6% and 1.0% on P. densiflora, respectively. This study suggests that the two methods for annual increment measurement are very similar, but species specificity should be concerned for direct comparison.

• 한국자원식물학회지
• /
• 제26권6호
• /
• pp.709-717
• /
• 2013

The objective of this study was to examine the effect of root pruning intensity in combination with different initial seedling size on the growth of transplanting seedlings of Quercus acutissima. One-year-old seedlings were divided into three groups depending on their height, i.e. small (< 15 cm), medium (25-35 cm) and large size (35 cm <). Root of seedlings was pruned by three intensity such as, leaving 5 cm (severe), 10 cm (medium) and 15 cm (light) of taproot from the root-collar. After one year, we investigated survival rate, height and root-collar diameter (RCD) increment and final shoot dry weight. Also we measured characteristics of newly developed lateral roots such as number, total length, dry weight and diameter. Severe root pruning showed the lowest survival rate in all seedling size. Height increment, RCD increment and shoot dry weight were decreased with increasing intensity of root pruning. Seedlings of medium and light root pruning showed similar above-ground growth and dry weight of lateral roots. More large seedlings showed good survival rate, height increment and final shoot dry mass in all root pruning intensity. Therefore, one-year-old seedlings of Q. acutissima should be pruned taproot by 10 cm and transplanted to obtain excellent performance and increase the efficiency of transplanting work. Based on the findings of this study, it is important that applying to different root pruning intensity depending on initial seedling size for producing 2-year-old seedlings with excellent growth and high quality.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.337-346
• /
• 1996

The purpose of this study was to provide basic data of the growth characteristics of the landscape trees for better landscape planting design, construction and maintenance through the prediction of landscape change as time passes fly the analysis of survival rate, distribution patterns & increment percent of tree height, width, stem diameter (breast or surface) of widely used six tree species in Seongnam-si Eunhang-jugong apartment housing areas (8 years have passed after landsape alanting work). The main results can be summarized as followed. The tree survival rate of Pinus parviflora was the highest rate 89.2% than any other species, but Acer buergerianum showed the lowest survival rate at that of it 35.0%, & that of Picea abies 70.5 %, Metasequoia glyptostroboides 71.6%, Maknolia denudata 38.9%, Acer paimatum was 71.7%, As a whole, the tree survival rate of coniferous trees were relatively high. The tree height increment percent of the deciduous species wert relatively high. And that of Metasequoia glyptostroboides was the highest rate 11.61% than any other species, but that of Magnolia denudata was the lowest rate 5.59% than any other species. According to this results, the increment percent of trees in this apartment areas were comparatively lower than that of each related species planted in nursery area. And this results would be considered when landscape experts do landscape planting design, construction & maintenance. The distribution patterns of present tree size showed a Normal Distribution like any other biological features.

• 한국정보처리학회논문지
• /
• 제4권8호
• /
• pp.1930-1939
• /
• 1997

본 논문에서는 최근에 [12]에 제시된 그레이 큐브의 고장 지름(fault diameter)과 고장 허용도(fault tolerance)를 분석한다. 상호 연결망의 고장 지름은 연결망을 평가하기 위한 중요한 척도중 하나로서 노드들이 고장인 경우 노드를 사이에 최장 거리를 나타낸다. $2^n$개의 노드를 가지는 n-차원 그레이큐브의 고장 지름이 지름 +2임을 보인다.($n{\ge}3$). 이는 노드들이 고장인 환경에서도 노드들 사이의 최장 거리가 단지 상수 요소밖에 증가하지 않음을 나타낸다. 이 결과를 널리 알려진 하이퍼큐브의 고장 지름과 비교하면 노드 고장인 환경에서도 메시지의 최장 전달 거리가 하이퍼큐브의 그것에 비해 약 절반 정도임을 보이고 있다.

• 대한의사협회지
• /
• 제61권12호
• /
• pp.749-755
• /
• 2018

Particulate matter is an air pollutant emitted from both natural and anthropogenic sources, and its adverse health effects have been well documented in time-series analyses and cohort studies. The effect size of particulate matter exposure-a roughly 0.5% increase in mortality for each $10{\mu}g/m^3$ increment of short-term exposure to particulate matter with aerodynamic diameter ${\leq}10{\mu}m$ and approximately a 10% increase for each $10{\mu}g/m^3$ increment of long-term exposure to particulate matter with aerodynamic diameter ${\leq}2.5{\mu}m$-is small compared to other risk factors, but the exposure is involuntary and affects the entire population, which makes particulate matter pollution an important public health issue. The World Health Organization and Korean government have both established guidelines for particulate matter concentrations, but the Korean guideline is less stringent than that of the World Health Organization. The annual mean concentration of particulate matter in Korea is decreasing, but the trend seems to be slowing. In addition to policy efforts to reduce particulate matter emission, personal approaches such as the use of face masks and air purifiers have been recommended. Personal approaches may not solve the fundamental problem, but can provide temporary mitigation until efforts to reduce emission make progress.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.35-41
• /
• 2005

An air levitation type wafer transfer system is composed of control and transfer track. Wafer transfer speed is mainly affected by air velocity of propulsion nozzle. In this study, the propulsion force coefficient was evaluated experimentally for the nozzle with 0.5mm, 0.8mm, and 1.0mm diameter. As a result, the propulsion force was largest in the smallest size of nozzle at same air velocity. The propulsion force coefficient of nozzle increases with reducing diameter of nozzle. This increment of propulsion force coefficient was enlarged remarkably at the 0.5mm diameter of nozzle.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.67-73
• /
• 2001

To investigate the relationships of solder joint characteristics with solder composition and A:V ratio (solder volume per pad area), Sn-37Pb and Sn-4.0Ag-0.5Cu solder balls with 330, 400, 450 and $457{\mu}{\textrm}{m}$ size were reflowed on same substrate. Sn-37Pb and Sn-4.0Ag-0.5Cu was reflowed at $220^{\circ}C$ and $240^{\circ}C$ respectively by IR-type soldering machine. As a result of reflowed solder- ball diameter(D) and height(H) measurement, D/H was decreased with solder ball size increment in range of 330~450 ${\mu}{\textrm}{m}$. But, D/H was increased in the solder joint for 457 ${\mu}{\textrm}{m}$ size, it was caused possibly by decrement of solder ball height increment compared with solder volume increment. As a result of shear and pull test, joint strength with A:V ratio was high. Joint strength of Sn-4.0Ag-0.5Cu was higher than Sn-37Pb. However, Sn-37Pb had more stable solder joint of small standard deviation. A thick and clean scallop type Ni-Cu-Sn intermetallic compound layer was formed in high A:V ratio and Sn-4.0Ag-0.5Cu solder joint interface.

• 한국산림과학회지
• /
• 제87권3호
• /
• pp.483-492
• /
• 1998

본 연구는 강원도 평창군 중왕산 지역 천연 활엽수림내에 분포하고 있는 음나무림의 입지 및 생장특성을 조사하기 위하여 실시되었다. 이 지역에 출현하는 음나무림의 지형적 특성은 해발 고도 1,000~1,200m에 경사가 급하며, 방위는 북동에서 북서방향으로 능선-사면이였다. 음나무 임분의 토양 특성은 A층 토양 깊이가 평균 24cm로 깊고, 수분함량은 약 50%로 높으며, 토양양료가 비옥한 지역이었다. 또한, 음나무림과 함께 나타나는 주요 상층 수종은 신갈나무 고로쇠, 당단풍, 까치박달 등이었으며 음나무림내 하층 초본류는 참나물, 벌깨덩굴, 단풍취, 고사리류 등이 많이 출현하였다. 음나무림의 연평균 흉고 작정 생상량은 2.4mm/yr인데, 입지별 생산량을 분석한 결과 해발 고도가 낮을수록, 방위는 남향에서 그리고 지형은 계곡입지에서 가장 높은 값을 나타내었다.