• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.359-365
• /
• 1985

The four rice varieties, Kwanak, Nongbaek, Pungsan and Nampung-byo were cultivated to examine the growth conditions and grain yield in a Gyuam SiL paddy field irrigated with cold water around $17^{\circ}C$. Water temperatures for various distances from the inlet were measured. The results were summerized as follows. 1. Culm length, panicle exertion, diameter of the 3rd internode stem, heading date, fertilization rate, ripeness rate, no. of grains per panicle and grain yield were sensitive to water temperature. Panicle length, flag-leaf length, diameter of spike-neck and no. of panicles, however, were negligibly sensitive and there were no differences among varieties. 2. Elongations of the 2nd and 3rd internode steam were unsensitive to water temperature. 1st internode elongation and 4th internode development, however, were sensitive which was major factor in the culm length. 3. Ratios of partial dry weight to total dry weight were closely correlated with water temperature, Therefore, dry weight of grain was increased with water temperature while that of plant and root decreased. 4. Chlorophyll contents were decreased with the increment of water temperature and the highest at $20^{\circ}C$. 5. There was no grain yield at $17^{\circ}C$, Increases of grain yield to water temperature per unit were order at Pungsan > Kwanak > Nongbaek > Nampung. 6. The critical temperature in grain yield was $21^{\circ}C$. Optimum temperatures of Japonica ${\times}$ Indica types were higher than those of Japonica types.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.278-283
• /
• 2003

This study was carried out to examine the nitrogen removal rate of a subsurface-flow treatment wetland system which was constructed on floodplain of the Kwangju River from May to June 2001. Its dimensions were 29m in length, 9m in width and 0.65m in depth. A bottom layer of 45cm in depth was filled with crushed granite with about $15{\sim}30\;mm$ in diameter and a middle layer of 10cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds (Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju River flowed into it via a pipe by gravity flow and its effluent was funneled back into the river. The height of reed stems was 44.2 cm in July 2001 and 75.3cm in September 2001. The number of stems was increased from $80\;stems/m^2$ in July 2001 to $136\;stems/m^2$ in September 2001. Volume and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow and outflow averaged 40.0 and $39.2\;m^3/day$, respectively. Hydraulic detention time was about 1.5 days. Average nitrogen uptake by reeds was $69.31\;N\;mg/m^2/day$. Removal rate of $NO_3-N$, $NH_3-N$, T-N averaged 195.58, 53.65, and $628.44\;mg/m^2/day$, respectively. Changes of $NO_3-N$ and $NH_3-N$ abatement rates were closely related to those of wetland temperatures. The lower removal rate of nitrogen species compared with that of subsurface-flow wetlands operating in North America could be attributed to the initial stage of the system and inclusion of two cold months into the six-month monitoring period. Increase of standing density of reeds within a few years will develop both root zones suitable for the nitrification of ammonia and surface layer substrates beneficial to the denitrification of nitrates into nitrogen gases, which may lead to increment in the nitrogen retention rate.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.422-430
• /
• 2014

This study was conducted to investigate growth changes of DBH, height, crown width, volume, stem biomass, and dead trees after thinning treatments with different thinning intensity for Korean white pine (Pinus koraiensis) plantation. First thinning was applied with 29~69% intensity based on number of trees in 19-yearold plantation, and trees were measured three times: right after thinning (19-year-old), 5 years later (24-yearold), 12 years later (29-year-old). In the case of DBH growth, average DBH growth of heavily thinned plots was 19.6~19.9% higher 5 years later, and 13.3~24.7% higher 12 years later, compared to that of unthinned plots. Initial diameter growth rate was higher than late growth rate. The proportion of large pole candidates ($DBH{\geq}25cm$) was 31% in heavily thinned plot while only 2% was shown in unthinned plot. No difference was shown in height growth depending on plots, and average crown width growth in heavily thinned plots was 30.6~33.3% higher, 5 years later, and 35.0~40.0% higher, 12 years later, compared to that of unthinned plots. Average volume growth of individual trees in heavily thinned plots was 39.8~46.8% higher, 5 years later, and 23.0~52.0% higher, 12 years later, compared to unthinned plots. The maximum volume and biomass per unit area were shown in unthinned plot; the volume and biomass 5 and 12 years later after thinning were $133m^3/ha$ (51 kg/ha) and $344m^3/ha$ (132 kg/ha), respectivily. The significant difference appeared in crown width, volume, and biomass depending on thinning intensity. No dead trees occurred in heavily thinned plots for 12 years after thinning, while mortality rate in unthinned plots was 27.9~37.8%. As a result of analyzing annual increment using cores to determine the timing of second thinning, it suggested that second thinning be suitable around 10 years after first thinning.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.236-242
• /
• 1996

Orostachys japonjcus, called Wasong in herb medicine, has been artificially cultivated as an anti-tumor medicinal. The experiment was done to examine the effect of night-break periods imposed immediately before its bolting time on its morphological, flowering-related characters and fraction dry weights. After a plant was grown in a 15cm plastic pot containing a 2:1 soil:Peat moss mixture for about 3 months, three different night-break periods (0.5, 1 and 2 hours) around midnight were treated from Aug. 24. to compare with the natural daylength. The plants were sampled 6 times by 2-week interval after the treatments. Plant height and inflorescence length of all the treatments inclined with time lapse after the treatment and were shorter in 2 hour night-break due to slow increment than in the other treatments, while stem diameter showed reverse result. All the treatments except 2 hour night -break were nearly same in fraction, shoot and total dry weights per plant; two hour night-break treatment had greater leaf and bract weight from 6 weeks, greater stem, shoot and total weights from 2 weeks and greater root weight from 4 weeks but did less floret weight after the treatment. Although florets on the inflorescence were formed in 2 hour night-break treatment, flowering florets and flowering plants never occurred. In the other treatments showed the similar response, however, more florets appeared from 2 weeks, flowering florets was sharply increased from 6 weeks and flowering plants were reached up to 100% from 6 to 8 weeks after the treatment. Inflorescence length or number of total florets per plant in 2 hour night-break was positive-correlated to all the fraction dry weights except that those of natural daylength was not done, meaning that its artificial cultivation should permit bolting to secure more shoot dry matter.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.276-285
• /
• 1998

The aboveground biomass and nutrient content (N, P, K, Ca and Mg) of Pinus koraiensis S. et Z., aged 9, 22, 34, 46, 66 years, were measured in the Experiment Forest of Kangwon National University of Kangwondo province. The site index of the stands ranged from 13.5 to 14.2. Allometric equations (logY=alogX+b, where Y, X is ovendry mass and DBH, respectively) relating dry weights of stem, branches and needles to diameter at breast height (DBH) were developed to estimate aboveground tree biomass. Total above ground tree biomass increased with stand age from $21.8t\;ha^{-1}$ in the 9-year-old stand to $130t\;ha^{-1}$ in the 66-Year-old stand. Aboveground biomass was allocated as follows : stem> branch > foliage, except for the 9-year-old stand which had a greater proportion of foliage biomass than branch biomass. As stand age increased, an increasing proportion of annual biomass increment was allocated to stems. The aboveground biomass of shrubs and herbs ranged from 0.4 to $3.9t\;ha^{-1}$ and from 0.05 to $0.6t\;ha^{-1}$, respectively. No relationship was found between aboveground understory biomass and stand age. The mass of woody debris and forest floor varied between 0.59 to $1.54t\;ha^{-1}$ and 6.0 to $21.63t\;ha^{-1}$, respectively. Nutrient accumulation in aboveground tree biomass increased with stand age and was in the order of N > Ca > K > P > Mg. Average rates of nutrients accumulation in biomass were greatest in the early stages of stand development, and less marked as stand aged. The nutrient concentrations in different tree components decreased in the order of needle > branch > stem. There were no detectable trends in nutrient content of the forest floor and mineral soils with stand age. Understory vegetation contributed little to the nutrient pool of these Korean pine ecosystems. Mineral soil contained the Breast proportion of nutrient capital of the various ecosystem compartments.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.295-305
• /
• 2001

This study was conducted to reveal stand structure and competition status by site types of natural deciduous forest in Pyungchang, Kangwon-do. The study site was divided by nine different types based on elevation(higher than 1,000m, 700~1,000m. lower than 700m) and topography(ridge, slope, valley). The objective of this study is to provide a basic information necessary for the environment-friendly management methods of natural deciduous forest on the basis of the stand structure and competition status by site types. It is confirmed that the range from 700m to 1,000m in elevation was the most suitable for stand growth. Species diversity and richness index also tended to be increased as elevation decreased. The ridge was the best in terms of stand growth by topography and followed by slope and valley in order. In addition, as expected, species with high importance value showed relatively low evenness index. The distance-independent competition index was selected as the best competition index model in seven site types of natural deciduous forest. On the other hand, the distance-dependent competition index was highly correlated with periodic annual increment of diameter in both ridge at higher than 1,000m and valley of 700m to 1,000m in elevation. It is proved, as a result, that the best competition index model is somewhat different by site types. From the analysis growth characteristics and competition status by site types, it is identified that the species with high importance value performed well in both growth and competition. The growth of Q. mongolica was excellent in the areas of higher elevation than 700m. Although K. pilus had relatively low importance value in higher elevation than 1,000m and ridge of 700m to 1,000m, the species had stronger competition status rather than other species. Also, U. davidiana and M. amurensis were good in competition status at lower elevation than 1,000m. It is necessary, therefore, that appropriate tending practice should be adopted based on the growth pattern and competition status of each species distributed by site types.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.385-396
• /
• 2001

The purpose of this experiment was to examine the histological changes and the pattern of expression of proliferating cell nuclear antigen(PCNA) and type I collagen in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. Seven adult male mongrel dogs weighing over 20kg were used for this experiment. The author excluded 3 animals because they died before the planned time of sacrifice. The custom-made linear extraoral device and 4 bicortical fixation screws 2.3mm in diameter, 50mm in total length, 15mm in screw length were used in each animal. The distal part of the distractor produced a 0.75mm gap between proximal and distal bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side from each animal was experimental side and the left side was left intact and served as control. At the experimental side, the mandibular body was osteotomized. After 5-day latency period, the segments were distracted with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were sacrificed at the 4th. 17th, and 32th day after the end of the distraction. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with Masson trichrome and examined under the light microscope. The immunohistochemical examinations using anti-PCNA antibody and anti-type-I collagen antibody were performed to examine the pattern of the expression of PCNA and type I collagen, respectively. Results : 1. The mean increment of the distance between the proximal and distal screw-holding parts of the distractor was 6.8mm. The average elongation of the mandible in the experimental side was 5.3mm. The loss of elongation was 1.5mm in average. 2. New bone was already observed at the 4th. day after the end of distraction. But, bony union was not completed in the distraction gap at the 32th. day after the end of distraction by radiographic and microscopic examinations. 3. The expression rate of PCNA positive cells in the distraction gap had a tendency of decrease from 35.1-68.8% initially, to 49.1%, and finally to 17.6-27.2%. But at the final period, the tissue of the elongated gap still had the ability of cell proliferation. On the other hand, the expression of PCNA positive cells in the control side were negligible through the experimental period. 4. PCNA positive cells were observed primarily both at the central fibrous zone and at the region of just adjacent to CFZ which initiated new bone formation. 5. The expression pattern of the type I collagen was not zone-specific. They were observed diffusely throughout the elongation gap. 6. The predominant mechanism of new bone formation in the distraction gap was intramembranous. But, some of the regenerated bone was formed by endochondral ossification.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.287-301
• /
• 1989

A tree of Ailanthus altissima Swingle was fastened with a plastic band, 19mm wide, around the stem 180cm above ground level and was left to grow under this condition for one year, By removal of this band the tumorous tissue gradually developed and the tree bearing distinct tumorous tissue, an overgrowth surrounding the stem, was harvested two years after the band removal. For the investigation of this tumorous part and its comparison with adjacent normal parts in the anatomical features of individual elements, the tumorous part and parts directly and 40cm above and below the tumorous part were obtained from the tree. The tumor wood having remarkably wider growth increment occurred in the 3rd growth ring the first year after removal of the fastened band, and the barrier zone which delimited the discolored wood from the normal-colored wood inwards appeared u1 the intra-2nd growth ring produced during the fastened period in the tumorous part and the false ring-like zones equivalent to barrier Zone were shown in the normal-colored 2nd growth rings of the parts directly and 40cm above and below the tumorous part, as well. The tumor wood, the 3rd growth ring, and proportion of the 2nd growth ring formed after barrier zone in the tumorous part shared common characteristics in the irregular growth ring boundary, misshapen and shorter individual fibers and vessel elements, and large ray widths and heights. The springwood pores were smaller in diameter in the tumor wood, and the larger radial and smaller tangential diameters of summerwood solitary pores and individual pores consisting of pore multiples in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part. Only in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part, ray densities greatly increased. And the massive tumor wood was caused not by cell size but by cell number because the radial and tangential diameters of fibers in the tumor wood, the 3rd growth ring, in the tumorous part were not sufficiently different from those in the same aged growth rings of the directly and 40cm above and below the tumorous part.