• Journal of Environmental Science International
• /
• v.12 no.5
• /
• pp.559-564
• /
• 2003

The specific ion effects are observed in the alumina-metal EDTA(Ethylene Diamine Tetraacetic Acid) system. These effects seem to be associated with the fluidity of the metal ion in the complex. A consideration of the order of adsorption of the complexes on alumina indicates that a specific ion effect also affects the stability of the system. It is clear that EDTA and its heavy metal complexes have a significant effect on the dewaterability of alumina. These effects are not well represented by zeta potential measurements, especially for EDTA alone. With the nonspeciating complexes, though, the maximum permeability is predicted by the pH$\_$zpc/ from zeta potential measurements. At other pH value, the refiltration rate is better predicted by the state of coagulation as measured by log W.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.313-320
• /
• 2002

In accordance with the need of developing a methodology for the sludge reduction, this study investigates the effect of sonication on the dewaterability of the sewage sludge. The investigation involves laboratory experiments of the sewage sludge from Yongin Waste Treatment Plant. The Laboratory tests were conducted under a broad range of conditions including energy levels of ultrasonic waves, time for the treatment, pH, and effect of polymers. The results of the study show that sonication enhances the dewaterability significantly The degree of enhancement varies with sonication power, treatment time, the amount of sludge treated. The effect of sonication on the temperature and pH of the test specimens seems not to be significant. The polymer can be useful to enhance the effectiveness of ultrasound treatment.

• Journal of Environmental Health Sciences
• /
• v.41 no.5
• /
• pp.327-334
• /
• 2015

Objectives: In order to review both the effects of sewage sludge dewaterability and deodorizing ability in the existing advanced sewage treatment process, BIO-CLOD (a solidified mixture of 10% Bacillus concentrate and inorganics) was used as an inorganic conditioner effective for deodorization treatment in addition to the removal of organic matter and nutritive salts. Methods: Sludge dewaterability was evaluated using specific resistance to filtration (SRF) experiments with six agitators and two types of commercially available BIO-CLOD; one that is made by grinding solid matter (powdered BIO-CLOD) and one that has been obtained by sieving a separation with a particle diameter of 100 mesh (100 mesh BIO-CLOD). For deodorization odor treatment experiments, 20 g of commercially available solid BIO-CLOD was submerged in four liters of sewage sludge and mixed and agitated for 45 days. Results: When BIO-CLOD was injected into sewage sludge to experimentally compare specific resistance to filtration (SRF), the optimum amount of BIO-CLOD to be injected was shown to be 2% w/v and the SRF value in this case was $1.35{\times}10^{12}m/kg$. pH changes following BIO-CLOD injection were within 6.5-7.0. By 14 days after submerging BIO-CLOD into the sewage sludge to evaluate its deodorizing ability, $H_2S$ decreased by 68% and methyl mercaptan decreased by 74%. By 45 days after the submergal, both items decreased by 100%, indicating deodorizing ability. Conclusion: To compare the levels of dewaterablity of sewage sludge at different particle sizes of inorganic conditioner, powdered BIO-CLOD, particle size 100 mesh BIO-CLOD, and bentonite were tested. It could be seen that as the powdered BIO-CLOD increased, the precipitability increased up to 62% in 30 minutes. As an inorganic conditioner, BIO-CLOD was identified as a stable sludge conditioner that does not affect pH.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.12-18
• /
• 2004

A study on the enhancement of the dewaterability of sewage sludge was carried out by using the sea waste materials as a dewatering aid. It was made from a starfish and a shell by heating at $105∼700 ^{\circ}C$ and centrifuge and belt press were used as a mechanical dewatering process. The moisture content of sludge cake was reduced by 15∼22% (w/w) after addition of the dewatering aid at the dose of 1∼8 g/100mL of digested sludge. CST (capillary suction time) was measured to evaluate the effect of dewatering aid on sludge dewatering properties. CST was reduced after addition of a shell while increased after addition of a starfish. Enhancement of dewaterability after addition of a shell was better than that of a starfish. The heating temperature effect of the dewatering aid on dewaterability was not clear.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.125-131
• /
• 2002

This study was carried out to evaluated for dewaterability of sewage sludge using waste oystershell and loess. The Jar-Test and the Buchner funnel test were proceeded for the assessment of dewaterability of a thickened sludge and digested sludge. TTF(Time to Filter), SRF(Specific Resistance to Filtration) were adopted as the valuation indices of sludge dewaterability. Dewatering conditioner which composed of both oystershell and loess is much dewaterable than the one composed of only oystershell. In the course of combining with oystershell and loess, the following fact was found that the dewaterability of the combination which have the higher ratio of oystershell than that of loess is superior. The most suitable oystershell :loess ratio of dewatering conditioner is 9:1 in treating both thickened sludge and digested sludge.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.17-21
• /
• 2001

The object of this study is to find out the characteristics of waste oyster shells and determine the proper dosage of powdered waster oyster shells as the conditioning agent for water treatment sludge dewatering process. The large amount of waste oyster shells which discharges from the oyster farming, occurs serious environmental hazards. However, oysters shell contain large amount(about 38% by weight) of alkaline minerals, such as calcium and magnesium and so on, this natural material is thought to have the petential ability as a good conditioning agent. The results of this study are as follows. The optimum condition for improvement of the water treatment sludge dewaterability is when 6 g of waste oyster shell powder added to 200$m\ell$ of water treatment sludge. At optimum condition, the solid contents can reach to 31.78% and the specific resistance of conditioned sludge is 0.16$\times$10$^{8}$ sec$^2$/g. However, exceeding the of powdered waste oyster shell is needed to get the effective result. Consequently, the waste oyster shell can be a recyclable material to improve the dewaterability of water treatment sludges.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.277-284
• /
• 2021

The ballasted flocculation effects of the mill scale and magnetite on activated sludge were investigated. Both ballasted flocculants (BF) could remarkably improve the sludge settleability in terms of zone settling velocity (ZSV) and sludge volume index (SVI). With the BF dosage of 0.2 to 2.0 g-BF/g-SS, the magnetite particles showed better efficiency on improving settling behavior of activated sludge than the mill scale due to higher surface area and hydrophobic property. The efficiency of SVI₃₀ with magnetite injection was 2.5 to 11.3% higher than mill scale injection and that of the ZSV appreciated from 23.7% to 44.4% for magnetite injection. Averaged floc size of the BF sludge with magnetite dosage (0.5 g-BF/g-SS) was 2.3 times higher than that of the control sludge. Dewaterability of the sludge was also greatly improved by addition of the BF. The specific resistance to filtration (SRF) was reduced exponentially with increasing the dosage of BF. However, the BF's particle size effect on the SRF looks to be marginal. Consequently, for improving the dewaterability, the BF played a physical role to remove the pore water of the biological flocs by intrusive attachment and a chemical role to induce aggregation of the flocs by charge neutralization.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.89-96
• /
• 2018

This study aimed to investigate the feasibility of improving dewaterability and settleability of sewage sludge using coagulation sludge. When mixed with sewage sludge and coagulation sludge at 1:1 ratio, capillary suction time(CST) and specific resistance to filtration(SRF) decreased by about 56% and 68%, respectively. It is found that total solids(TS) and volatile solids(VS) of mixing sludge are increased by about 59% and 53%, respectively. Also, the turbidity of the mixing sludge supernatant was reduced from 99 to 16 NTU. It is observed that the mixing of sewage sludge and coagulation sludge at 1:1 showed better effect than using poly-aluminum chloride(PAC) coagulant at 25 mg/L.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• 수도
• /
• v.24 no.2 s.83
• /
• pp.28-38
• /
• 1997