• Asian Journal of Turfgrass Science
• /
• v.13 no.3
• /
• pp.139-146
• /
• 1999

This studies was carried out to estimate the influence of mowing height, time lapse, rolling, and dew removal on green speed of putting green in Lake Side C. C. on 29, 30 Jun. 1998. The results were as follows. As mowing height increased, green speed tended to be decreased. After mowing, green speed tended to be decreased over the time, and appeared to be decrease significantly on the next day[Y=3.206-0.127.X1-1.41$\times$10-2.X4(Y=green speed, X1=mowing height, X4=time lapse)]. This suggests that the frequency of mowing must be increased to maintain the green speed. But, frequent mowing cause the turfgrass of putting green to be stressed. Rolling tended to increase green speed[Y=3.555-0.202.X1+0.111.X2(Y=green speed, X1=mowing height, X2=rolling)]. Thus, rollers is thought to be an tool used to increase green speed and rolling is expected to be able to decrease turfgrass stress while maintaining the performance level of the putting green. Dew removal appeared to increase green speed significantly[Y=2.499-0.125.X1+0.366.X3(Y=green speed, X1=mowing height, X3=dew removal)]. Thus, dew removal is expected to maintain the green speed in the morning.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1992

A study on acidity in fog, dew and frost was carried out. Samples were taken during May 1990-February 1991 at two sites in Chongwon, Choongbook. The acidity of dew and of fog collected from grass at site A was 4.89 and 5.46, respectively. Dew in summer showed very strong acidity. The volume of dew deposited on grass was much less than the volume of rain, but dew is effective to diffuse acid predursors and acid materials. Dew and fog can remove more effectively atmospheric acid materiasl deoposited on grass by diurnal turbulent motion rather than direct absorption of acid predursors and materials in the atmosphere. In a polluted area, acidic dew and fog can be occurred by the direct absorption and oxidation of acidic predursors in the atmosphere as well as the role of wet removal on grass surface. Acidity of frost collected on teflon surface showed little difference to acidity of dew and fog on teflon surface. This suggests a similar absorption mechanism of atmospheric precursors and materials into dew and frost in the atmosphere. Strong acidity in dew, fog and frost appeared to occur from local pollution sources of several ten kilometres. In particular, strong acidity in dew, fog, and frost together with acid rain can accelerate a damage in ecosystems. Discussion is made on scientific analyses and seasonal variations of acidity of fog, dew and frost. A mechanism on acidification of fog, dew and frost is also discussed.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.11-23
• /
• 2006

This study was carried out to propose low types of green speed expectation models for fast putting green management by changing mowing height($4.0{\sim}2.5$ mm) and timing of rolling, dew removal and dew removal+rolling. Ball roll distance data were taken from the creeping bentgrass(Agrostis palustris Huds. 'Penncross') practice green of east course at the Lakeside C.C. in October 18, 2001 and May 25, 2002. Data were subjected to multi-regression analysis using Statistical Package for the Social Science. Among four types of green speed expectation models, the best multiple-regression equation for fast green management was as follows; $Y_4=4.171-0.225{\cdot}X_1-0.038{\cdot}X_2$ (where, $Y_4$ : green speed(m) after single dew removal+single rolling, $X_1$ : mowing height($4.0{\sim}2.5,\;X_2$ : passage of time ($0{\sim}8$ h.)). The equation[single dew removal by using sponge roller $\rightarrow$ single mowing at 3.0 mm height or less $\rightarrow$ single rolling] explained to provide fast green over 3.2 m (Stimpmeter readings required for USGA championship play) until the end of first round. Therefore, this cultural practice system was believed to provide fast putting green condition for professional golf tournament

• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.835-841
• /
• 2011

The humidification is essential for performance enhancement of the electrolysis of PEMFC because proton conductivity depends on hydration of the proton exchange membrane. In this study, the humidification experiment did about On/Off control the humidification and dew condensation for PEMFC by using of the membrane humidifiers. As the results, it was possible to approximation control of the humidity by using of the solenoid valve On/Off control on the membrane humidifier. Also the problem on the dew condensation was resolved by approximation humidity control through solenoid valve On/Off control and the removal of the dew condensation in the flow channel was verified through visualization experiment.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.2
• /
• pp.33-38
• /
• 2004

Outside wall systems we lost much energy from the dew of thermal bridge and unsuitable adiabatic construction. The air vent wall system can make reduce cooling loads from the outside wall in summer. The basic concept is connected with buoyant force by the difference of density. An external surface of a wall absorbs solar radiation, and transfers it to the air in the cavity. The warmed air gets buoyant force. So the warmed air is released through the top opening and cooler outside air replaces the space in the cavity. So because of the cavity and the openings, the cooling load reduction by natural ventilation is believed to be considerable. The purpose of this study is finding optimal length of air cavity by numerical analyses.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.66-77
• /
• 2003

The purpose of this study is to propose a standard putting green management program to prepare fast green suitable for international golf tournaments, and to conform whether the reported green speed model can be applied to the real field situations. The west course of Lakeside Country Club was selected for the case study. This study was initiated on August 1st, 2001 and continued through October 4th, 2001. The results are summarized as follows: 1. Following the long-term schedule, 'penncross' creeping bentgrass turf was mowed at 5.0mm(37days), 4.5mm(8days), 4.0mm(4days), 3.5mm(2days), 3.2mm(2days), 3.0mm(2days), 2.8mm(2days) and the mowing direction was changed daily. Variation of mowing height was reduced to a minimum range. Core aerification with deep tines was applied 19 days prior to the first practice round. Dry sand maintenance was top-dressed 2 times at 1.5mm/$m^2$ on the 17th day and 1.0mm/$m^2$ on the 10th day. Minimum irrigation was applied to keep the turf alive. During the tournament preparation week, dew on the putting greens was removed by using a sponge roller. Following the dew removal, the greens were cut once each morning at a height of 2.8mm. The mower used was the 21 inch working behind mower equipped with a tournament bedknife and 11 reel blades. Following the mowing, the peens were rolled with a light-weight roller in one direction in the morning. Rolling was used as a finishing technique to ensure that the surface was as smooth as possible, and to provide true ball roll and maximum green speed. In conclusion these management practices satisfied the daily green stimpmeter readings required for USGA championship play. 2. During the period of tournament preparation, no damage was observed on the green, but scalping in green edge appeared in about 0.39% of the total area of 18 greens in the west course.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.384.2-384.2
• /
• 2016

Recent publications reported the self-propelled jumping of coalescing dew droplets on superhydrophobic surfaces [1-2]. We further investigated the initial growth, coalescence, and removal by self-propelled ejection of nano and microscopic water droplets on the superhydrophobic surface of lotus leaves under condensing conditions. By using a high-speed digital camera mounted on an optical microscope, we have found: (1) sub-micrometer droplets form and grow on nanoscale waxy hairs; (2) growing droplets coalesce rapidly upon contact, but never jump off the surface unless the diameter of merged droplets exceeds ${\sim}15{\mu}m$; (3) the diameter and direction of jumping droplets are very narrowly distributed, centered at $20-30{\mu}m$ and ${\sim}20$ degrees from the surface normal, respectively. We present a rationale for these observations on the basis of: (a) the hierarchically rough surface structure on nano- and micro-scales; (b) its chemical composition; and (c) the balance among competing forces of cohesion (surface tension), adhesion and gravity.

• Corrosion Science and Technology
• /
• v.17 no.4
• /
• pp.154-165
• /
• 2018

During the process of sulfur dioxide removal, flue gas desulfurization equipment provides a serious internal corrosion environment in creating sulfuric acid dew point corrosion. Therefore, the utilities must use the excellent corrosion resistance of steel desulfurization facilities in the atmosphere. Until now, the trend in developing anti-sulfuric acid steels was essentially the addition of Cu, in order to improve the corrosion resistance. The experimental alloy used in this study is Fe-0.03C-1.0Mn-0.3Si-0.15Ni-0.31Cu alloys to which Ru, Zn and Ta were added. In order to investigate the effect of $H_2SO_4$ concentration and the alloying elements, chemical and electrochemical corrosion tests were performed. In a low concentration of $H_2SO_4$ solution, the major factor affecting the corrosion rate of low alloy steels was the exchange current density for $H^+/H_2$ reaction, while in a high concentration of $H_2SO_4$ solution, the major factors were the thin and dense passive film and resulting passivation behavior. The alloying elements reducing the exchange current density in low concentration of $H_2SO_4$, and the alloying elements decreasing the passive current density in high concentration of $H_2SO_4$, together play an important role in determining the corrosion rate of Cu-bearing low alloy steels in a wide range of $H_2SO_4$ solution.

• Journal of the Korean earth science society
• /
• v.39 no.5
• /
• pp.403-418
• /
• 2018

This study conducted synoptic and mesoscale analyses to understand the cause of Japan Tsukuba tornado development, which occurred at 0340 UTC 6 May 2012. Prior to the tornado occurrence, there was a circular jet stream over Japan, and the surface was moist due to overnight precipitation. The circular jet stream brought cold and dry air to the upper-level atmosphere which let strong solar radiation heat the ground with clearing of sky cover. A tornadic supercell developed in the area of potentially unstable atmosphere. Sounding data at Tateno showed a capping inversion at 900 hPa at 0000 UTC 6 May. Strong insolation in early morning hours and removal of the inversion instigated vigorous updraft with rotation due to vertical shear in the upper-level atmosphere. This caused multiple tornadoes to occur from 0220 to 0340 UTC 6 May 2012. When comparing Tateno's climatological temperature and dew-point temperature profile on the day of event, the mid-level atmosphere was moister than typical sounding in the region. This study showed that tornado development in Tsukuba was caused by a combination of (a) topography and potential vorticity anomaly, which increased vorticity over the Kanto Plain; (b) vertical shear, which produced horizontal vortex line; and c) thermal instability, which triggered supercell and tilted the vortex line in the vertical.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2006

Chlorothalonil and imidacloprid sprayed onto the green peppers were degraded more faster at outdoor than in greenhouse. These results were affected by dew and photodegration, considering no rain during the experimental period. Chlorothalonil, esfenvalerate and imidacloprid in green pepper, green twist pepper and sweet pepper did not show any residual pattern, because green peppers are one of the continuous harvesting crops and pesticides could not be sprayed homogeneously on them. When green peppers were pickled with soy sauce and green twist peppers were fried with vegetable oil, the amounts of pesticides such as alpha-cypermethrin, bifenthrin, chlorfenapyr, esfenvalerate and imidacloprid were diminished to the levels of about $30{\sim}71$ and $20{\sim}41%$, respectively. Esfenvalerate and imidacloprid could not be detected in 2 month-old hot pepper paste. The removal rates of pesticide residues in leaves of green peppers were about $22{\sim}37%$ by washing, about $74{\sim}95%$ by parboiling, and about $17{\sim}55%$ by drying after parboiling.