• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2022

In this paper, the design of lightweight S-Box structure for implementing a low power AES cryptosystem based on composite field. In this approach, the S-Box is designed as a simple structure by which the three modules of x², λ, and GF((2²)²) merge into one module for improving the usable area and processing speed on GF(((2²)²)²). The designed AES S-Box is modelled in Veilog-HDL at structural level, and a logic synthesis is also performed through the use of Xilinx ISE 14.7 tool, where Spartan 3s1500l is used as a target FPGA device. It is shown that the designed S-Box is correctly operated through simulation result, where ModelSim 10.3. is used for performing timing simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.4065-4083
• /
• 2021

Super-resolution can improve the clarity of low-resolution (LR) images, which can increase the accuracy of high-level compute vision tasks. Portable devices have low computing power and storage performance. Large-scale neural network super-resolution methods are not suitable for portable devices. In order to save the computational cost and the number of parameters, Lightweight image processing method can improve the processing speed of portable devices. Therefore, we propose the Enhanced Information Multiple Distillation Network (EIMDN) to adapt lower delay and cost. The EIMDN takes feedback mechanism as the framework and obtains low level features through high level features. Further, we replace the feature extraction convolution operation in Information Multiple Distillation Block (IMDB), with Ghost module, and propose the Enhanced Information Multiple Distillation Block (EIMDB) to reduce the amount of calculation and the number of parameters. Finally, coordinate attention (CA) is used at the end of IMDB and EIMDB to enhance the important information extraction from Spaces and channels. Experimental results show that our proposed can achieve convergence faster with fewer parameters and computation, compared with other lightweight super-resolution methods. Under the condition of higher peak signal-to-noise ratio (PSNR) and higher structural similarity (SSIM), the performance of network reconstruction image texture and target contour is significantly improved.

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.74-84
• /
• 2022

The Korean mobile service market has persistently grown with the number of subscribers and volume of mobile traffic. It shows the slow diffusion of 5G subscribers, and rapid growth of both the MVNO(Mobile Virtual Network Operator) market and unlocked mobile phones. Therefore, this study derives the direction of telcos' strategies and policy implications by empirically analyzing the usage and attitude of LTE and 5G subscribers. Our major findings are as follows: First, our current mobile service subscription market constitutes most long-term customers for their incumbent carriers only by device change from lock-in with bundle services. Mobile tariffs, data speed, and benefits of bundle services are important factors affecting choices and customers' satisfaction with a provider and intentions of churning to another. Second, demand and satisfaction for using 5G are less because speeds and service tariffs act as pain points for 5G services. Third, the users' high preferences for MVNOs and unlocked mobile phones are linked to their subscription to MVNOs' low-cost plans with unlocked mobile phones on online channels. These streams lead to a big change in the market competition that MNO(Mobile Network Operator)s' market shares are expected to decrease and MVNOs' shares will be increased by two times, in the near future. Therefore, MNOs need to change their distribution strategies from offline to online channels and try to resolve the stereotype, "mobile tariffs are expensive," by enhancing their service values. Finally, as consumers prefer one-stop service in the same channel regardless of the distribution channel, policies should focus on the consumers' needs for convenience rather than on the channel separation for perfectly unlocked mobile phones.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.455-460
• /
• 2022

Brush-like ZnO hierarchical nanostructures decorated with MgxZn1-xO (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were fabricated and examined for application to a gas sensor. They were synthesized using vapor phase growth (VPG) on indium tin oxide (ITO) substrates. To generate electronic accumulation at ZnO surface, MgZnO nanoparticles were prepared by sol-gel method, and the ratio of Mg and Zn was adjusted to optimize the device for NO₂ gas detection. As the electrons in the accumulation layer generated by the heterojunction reacted faster and more frequently with the gas, the sensitivity and speed improved. When tested as sensing materials for gas sensors at 100 ppm NO₂ at 300℃, these MgZnO decorated ZnO nanostructures exhibited an improvement from 165 to 514 times compared to pristine ZnO. The response and recovery time of the MgZnO decorated ZnO samples were shorter than those of the pristine ZnO. Various analyzing techniques, including field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray powder diffraction (XRD) were employed to confirm the growth morphology, atomic composition, and crystalline information of the samples, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1105-1112
• /
• 2022

Field data monitoring systems such as renewable energy generation and smart farm integrated control are developing from PC and server to mobile first, and various wireless communication and application services have emerged with the development of IoT technology. Low-power wide-area networks are services optimized for low-power, low-capacity, and low-speed data transmission, and data collected in the field is transmitted to designated storage servers or cloud-based data platforms, enabling data monitoring. In this paper, we implement an IoT repeater that collects field data with a single device and transmits it to a wireless carrier cloud data flat using a low-power wide-area network, and a monitoring app using it. Using this, the system configuration is simpler, the cost of deployment and operation is lower, and effective data accumulation is possible.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1295-1302
• /
• 2021

As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino CNC. And after conversion to NC File, a pen was attached to each device to output a result to A4 paper. As a result, the output time was measured to be 1m 39s for PLC equipment and 2m 5s for Arduino CNC. In addition, it was confirmed that the 2D output was equally from the two equipments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1382-1391
• /
• 2022

White-box cryptography can respond to white-box attacks that can access and modify memory by safely hiding keys in the lookup table. However, because the size of lookup tables is large and the speed of encryption is slow, it is difficult to apply them to devices that require real-time while having limited resources, such as IoT(Internet of Things) devices. In this work, we propose a scheme for collecting short-length plaintexts and processing them at once, utilizing the characteristics that white-box ciphers process encryption on a lookup table size basis. As a result of comparing the proposed method, assuming that the table sizes of the Chow and XiaoLai schemes were 720KB(Kilobytes) and 18,000KB, respectively, memory usage reduced by about 29.9% and 1.24% on average in the Chow and XiaoLai schemes. The latency was decreased by about 3.36% and about 2.6% on average in the Chow and XiaoLai schemes, respectively, at a Traffic Load Rate of 15 Mbps(Mega bit per second) or higher.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2022

Exhaust gases emitted from internal combustion engines contain nitrogen oxides (NOx) and sulfur oxides (SOx), which are major air pollutants causing acid rain, respiratory diseases, and photochemical smog. As a countermeasure, scrubber systems are being studied extensively. In this study, the pressure drop characteristics were analyzed by changing the exhaust gas inflow velocity using a scrubber for a 700 kW engine as a model. In addition, the fluid flow inside the scrubber and the behavioral characteristics of the droplets were studied using CFD, and the design compatibility of the cleaning device was verified. Flow analysis was performed using inertial and viscous resistances by applying porous media to the complex shape of the scrubber. The speed of the exhaust passing through the outlet nozzle from the inlet was determined through the droplet behavior analysis by spraying, and the flow characteristics for the pressure drop were studied. In addition, it was confirmed through computational analysis whether there was a stagnation section in the exhaust gas flow in the scrubber or the sprayed droplets were in good contact with the exhaust gas.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.410-416
• /
• 2023

Unlike geostationary satellite communication systems, low-earth orbit(LEO) satellite communication systems move at relatively high speeds, and the angle with the ground device is not fixed and varies over a wide range. The propagation channel condition between satellites and ground nodes cannot be assumed line of sight(LOS) anymore. This paper analyzes the low-orbit multi-path fading satellite channel model that can occur in LEO satellite communication systems and Doppler frequency transition caused by high-speed maneuvering of LEO satellites and presents effective equalization techniques for OFDM and SC-FDE transmission methods suitable for multi-path frequency selective fading satellite channel models. In addition, this paper compares and analyzes the performance of OFDM and SC-FDE transmission methods in multipath fading LEO satellite channel environment using the proposed equalization techniques through simulations. Simulation results showed that SC-FDE outpeformed OFDM.