• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.466-468
• /
• 1999

현재 인터넷 프로토콜인 IPv4의 주소 부족 등의 문제를 해결하기 위해 차세대 인터넷 프로토콜 IPv6에 대한 연구가 활발히 진행되고 있다. 그러나 새로운 프로토콜 IPv6 상에서 기존의 다른 상위 프로토콜 및 응용이 어떠한 영향을 받게 될지는 의문이다. 한편, IPv6 상에서 새로운 프로토콜 및 응용을 개발할 때에 많은 시험이 요구된다. 이와 같은 이유로 인해 새로운 통신 프로토콜에 있어서 모니터링은 필수적이다. 그러나 지금까지의 많은 모니터링 라이브러리들은 텍스트에 기반하고 있으며, 그래픽 데이터를 제공하는 도구들도 대부분 통계정보의 제공에 초점을 두고 있다. 이를 두고 프로토콜이 그 표준에 따라 정확한 원리에 맞게 동작하는 지를 파악하는 데는 큰 도움이 되지 않고 있다. 이에 본 연구에서는 대상 프로토콜의 실제적인 동작 과정이나 원리를 알 수 있도록 그래픽 기반의 사용자 친화적 모니터링 도구를 제작한다. 이를 위해, 먼저 IPv6가 다른 프로토콜에 영향을 미칠 수 있는 사항들을 분석한다. 다음으로 본 교에 구축되어 있는 IPv6 호스트에 모니터링에 필요한 환경을 구축하고, Java Applet을 이용한 모니터 프로그램을 제작한다. 현재 개발하는 모니터 프로그램은 TCP의 슬라이딩 윈도우(Sliding Window) 기법에 관련된 사항을 모니터링 해주는 것으로 그 범위를 한정한다. 개발된 도구를 이용하여 IPv6 상에서 FTP가 TCP를 이용하여 파일을 전송하는 경우의 모니터링을 실시하고, 그 결과를 분석 제시한다. 이로써, 개발된사용자 친화적 모니터링 도구가 얼마나 쉽게 슬라이딩 윈도우 기법을 이해시켜 주고, 내포된 의미를 파악할 수 있게 해주는지를 알 수 있다.한 것으로 연구되었다. 정상조 직에 비해 산소가 부족하여 염기성대사(anaerobic metabolism)를 많이 함으로 그 부산물인 유산 (lactic acid)이 많이 생성됨으로 정상조직보다 pH가 낮아 암 조직이 정상조직에 비해 고온온열치료에 더 잘 듣는 원인이 된다. 3) 영양이 부족한 상태의 세포는 고온온열치료에 훨씬 예민하다. 4) 암조직은 혈관상태가 정상조직에 비해 좋지 않음으로 정상조직보다 쉽게 가온이 되며, 일단 가온된 온도는 잘 식지 않음으로 정상조직에 비해 훨씬 효율적이다. 5)고 온온열치료는 4$0^{\circ}C$~43.5 $^{\circ}C$정도에서만 이 작용이 일어남으로 정상인체에서 43$^{\circ}C$이상의 가온 은 쉽지 않음으로 이 효과는 암조직에서 주고 일어나게 된다. 6)고온온열치료는 방사선치료 후에 생기는 손상의 재생을 억제함으로 방사선의 치료효과를 높인다. 7)38.5$^{\circ}C$~41.5$^{\circ}C$의 낮 은 온도에서도 암조직의 산소 상태를 호전시켜 방사선 치료효과를 증대시키는 역할을 한다.alization)가 나타난다. 그러나 무의식에 대칭화만 있는 것은 아니며, 의식의 사고양식인 비대칭도 어느 정도 나타나며, 대칭화의 정도에 따라, 대상들이 잘 구분되어 있는 단계, 의식수준의 감정단계, 집단 내에서의 대칭화 단계, 집단간에서의 대칭화 단계, 구분이 없어지는 단계로 구분하였다.systems. We believe that this taxonomy is a significant contribution because it ad

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.182-192
• /
• 2010

This paper proposes the hardware IP design of JBIG2 encoder. In order to facilitate the next generation FAX after the standardization of JBIG2, major modules of JBIG2 encoder are designed and implemented, such as symbol extraction module, Huffman coder, MMR coder, and MQ coder. ImpulseC Codeveloper and Xilinx ISE/EDK program are used for the synthesis of VHDL code. To minimize the memory usage, 128 lines of input image are processed succesively instead of total image. The synthesized IPs are downloaded to Virtex-4 FX60 FPGA on ML410 development board. The four synthesized IPs utilize 36.7% of total slice of FPGA. Using Active-HDL tool, the generated IPs were verified showing normal operation. Compared with the software operation using microblaze cpu on ML410 board, the synthesized IPs are better in operation time. The improvement ratio of operation time between the synthesized IP and software is 17 times in case of symbol extraction IP, and 10 times in Huffman coder IP. MMR coder IP shows 6 times faster and MQ coder IP shows 2.2 times faster than software only operation. The synthesized H/W IP and S/W module cooperated to succeed in compressing the CCITT standard document.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.535-545
• /
• 2019

The PBA of ship weapon system should be installed and operated under harsh environmental conditions and so it should be highly reliable to endure the mission profiles during its entire lifetime. In the case of PBA failure during operation, rapid maintenance is highly likely to be difficult due to problems such as supply of parts, which can have a devastating effect on the mission. In order to validate the reliability of PBA, a series of tests are performed with PBA samples, but they require time, testing facilities, samples, expenses and failure analysis if failed. The reliability of PBA is predicted on the basis of specifications such as MIL-HDBK-217F, but this specification does not take into account failure mechanisms for specific design details, environment and usage, interconnects and its characteristics that drive many failures of PBA in the field. Therefore, this study predicts the reliability of PBA using an RPA tool and proposes the RPA methodology as a validation process at the design stage. With RPA, it is now possible to achieve design validation including inherent failure mechanism, identification of weakest link, alternative design options, and test plan development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.236-247
• /
• 2020

This study was conducted with the aim of developing inspection tools to select and measure human resource figures and appropriate core competency of the educational goals pursued by S universities. Therefore, key competency factors were defined consistent with concept of talented figures and educational objectives of S universities, inspection tools were developed to measure core competences, and directions are presented for future education policies and curriculum compilation and securing data for rational operation. Based on key competency indicators, questions were developed in a self-reporting form that measures the consent level of the respondents by comprising seven areas of competence, 16 small areas (sub-capacity), and 46 questions. The main Test conducted an analysis of the questionnaires based on the survey results of 2,486 people to ensure the validity of the inspection by conducting a positive factor analysis and reliability analysis. The core competency diagnostic tool of S university is meaningful in this study which verifies the effectiveness of the curriculum and programs conducted at S university and as the first step for the rational operation of the core competency certification system to improve the competency appropriate for students.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.163-185
• /
• 1999

The purpose of this study is to develop the model of constructivist multimedia-assisted instruction(CMAI) and to analyze the effect of it in the secondary school geography. The main results are as follows : (1) The conceptual model of CMAI can be defined as an instruction aiming at making a person who has self-directed learning ability through constructivism and multimedia. The procedural model of CMAI based on PIDA instructional strategy is divided into four stages : prediction & explanation, inquiry activity, discussion & fixation, application & synthesis stage. (2) CMAI is typed by offline CMAI and online CMAI. that is, O/WCMAI(online CMAI by web-based courseware). Offline CMAI is subdivided into P/TCMAI(offline CMAI by presentation-based courseware) and C/RCMAI(offline CMAI by cd-rom based courseware) according to authoring tool and function. (3) Offline constructivist multimedia course-ware(offline courseware) was developed for 2 periods as the material to analyze the effect of CMAI. Offline courseware is received development level of it. (4) After offline courseware being applied to the class, the effect of it according the types of the CMAI instruction(lecture instruction, whole teaching, individualized learning, cooperative learning) was analyzed. As the result of analyzing the descriptive statistics of the level of learning achievement and instruction response, there isn't big relationship between them. As the result of analyzing the inferential statistics of the level of learning achievement, there wasn't significant difference between the types of CMAI instruction in whole student of the classes and certain students who improved their grades. But as the result of analyzing of the level of instruction response, there was significant difference between lecture instruction and other types of the CMAI instruction(whole teaching, individualized learning, cooperative learning).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.816-822
• /
• 1997

The immobilization of a microorganism has been rapidly progressed with the development of biotechnology in recent years. Although it has been used as a tool to isolate products from biological media in various areas, it has not yet been practiced in the treatment of waste water. In this paper, we suggest a possibility to apply the immobilization technique In the recirculating aquaculture system. We examined the ability of $NH_4^+$ removal by nitrifier consortium immobilized in $Ba^{++}-alginate$, k-carrageenan and agar bead at the concentration of 50 g/L, respectively. In order to use the immobilized nitrifier consortium as media in the fludized bed reactor, the strength of bead was measured. $Ba^{++}-alginate$ as a support material showed higher strength of bead. Also, the nitrifier consortium immobilized in $Ba^{++}-alginate$ showed higher nitrification activity that could remove 20 mg/L ammonium ion than those immobilized in other two support materials, carrageenan and agar. The immobilized nitrifier consortium showed better nitrification activity than free nitrifier consortium.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.400-406
• /
• 2013

Water footprint means the direct and indirect water resource amount used for the life cycle of different goods, services and industries. In this study, the direct and indirect water resource consumption in industrial sectors were calculated by using water footprint evaluation method. As a result, agriculture and marine product industry takes part of 93% of whole water resource amount, showing the greatest amount of basic unit of water coefficient (637 $m^3/won$) following by petroleum and cool products industry of about 13 $m^3/won$. In the agriculture and marine product industry, the direct water consumption was only 25 billion $m^3$ compared to the indirect water, which is 130 billion $m^3$. The next highest industry was chemical product industry, which consists of 2 billion $m^3$ of the direct water and 4.5 billion $m^3$ of the indirect water consumption. In case of industries which have high direct water, it would be more effective to reduce amount of water related to the industry than to reduce water in actual process. This water footprint of each industry and evaluation method will be useful tool and method for development of national water management policy and regulation.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.5
• /
• pp.717-731
• /
• 2020

Objectives: The purpose of this study was to develop applicable standards for clinical dental hygiene practice in Korea and to evaluate their validity. Methods: Based on the standards for clinical dental hygiene practice developed in the United States and Canada, the standards were adapted to be applicable in Korea. The validity of the standards was evaluated by a self-writing questionnaire among 14 professors and 10 clinicians using a developed tool for evaluating the standards. A focus group interview was additionally conducted for clinicians to increase the validity of the standards. Descriptive statistics and Mann-Whitney test were performed using SPSS 25.0. To analyze the content of the focus group interviews, content analysis was conducted. Results: The standards for clinical dental hygiene practice consisted of five elements of professionalism for dental hygienists and a total of 28 items to perform the five stages of dental hygiene process of care (assessment, diagnosis, planning, implementation, and evaluation) and included conceptual meaning, clinical significance, and application methods with examples for each item. Conclusions: The standards for clinical dental hygiene practice developed in this study could contribute to standardizing dental clinical practices provided by dental hygienists. It is necessary to consistently improve the standards that are highly practical, to prevent oral diseases and maintain oral health of the public, based on the results of this validity evaluation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.129-150
• /
• 2003

Software license agreements, to be useful in the mass market, could not be individually negotiated, and had to be standardized and concise. The software license agreement needs to be presented to the licensee-users in a fashion that would allow for mass distribution of software, also for it to enforceable, that would draw the users' attention to the terms and conditions under which the publisher allowed the use of the software. These needs have been accomplished, with or without fail, through so called the "shrink-wrap licenses" Shrink-wrap licenses purpose to transfer computer softwares to their users by defining the terms and conditions of use of the software without implicating the "first sale doctrine" of the Copyright Act. These shrink-wrap licenses have become essential to the software industry. However, in USA, the law applicable to these licenses has been unclear and unsettled. Courts have struggled to develop a coherent framework governing their enforceability. Meanwhile, the National Conference of Commissioners on Uniform State Laws ("NCCUSL") in USA promulgated the Uniform Computer Information Transaction Act ("UCITA") governing contracts for computer information transaction on July 29, 1999. One clear objective of UCITA was to settle the law governing the enforceability of shrink-wrap licenses. In these respects, this paper first introduces the various forms that shrink-wrap licenses take(at Part II. Section 1.), and explains the main advantages of them(at Part II. Section 2.) Here it shows how shrink-wrap licenses value themselves for both software publishers and users, including that shrink-wrap licenses are a valuable contracting tool because they provide vital information and rights to software users and because they permit the contracting flexibility that is essential for today's software products. Next, this paper describes the current legal framework applicable to shrink-wrap licenses in USA(at Part III). Here it shows that in USA the development of case law governing shrink-wrap licenses occurred in two distinct stages. At first stage, judicial hostility toward shrink-wrap licenses marked such that they were not enforced pursuant to Article 2 of the Uniform Commercial Code. At second stage, courts began to recognize the pervasiveness of shrink-wrap licenses, their indispensability to the rapidly expanding information technology industry, and the urgent need to enforce such licenses in order to maintain low prices for consumers of computer hardware or software, resulting in the recognition of shrink-wrap licenses. Finally, in view of the importance of UCITA, this paper examines how it will affect the enforceability of shrink-wrap licenses(at Part IV). The drafters of UCITA, as well as the scholars and practitioners who have criticized it, agree that it validates shrink-wrap licenses, provided certain procedural protections are afforded to purchasers. These procedural protections include the licensee end-user must (i) manifest his assent to the shrink-wrap license, (ii) have an opportunity to review the shrink-wrap license, (iii) have a right to return the product without costs.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.169-202
• /
• 2017

In this thesis, we investigate the animation (2001) based on the three phases of the lyrical expression derived from Ye Weiqu's Mono no aware Aesthetic-a Japanese classical aesthetics' perspective, on the aspects of the perceptions of human, world, and nature. By analyzing each component of three phases of Mono no aware Aesthetic, the thesis illustrated that how (2001) utilized and expressed Japanese classical aesthetic and how Japanese classical aesthetics were widely utilized into modern Japanese animations. Moreover, the thesis also stated that Mono no aware Aesthetic has become a creative element in order to answer a development direction with future Japanese animations. Through integrating Japanese unique classical aesthetics into the animation elements, Satoshi Kon, the director of the animation, well carried and expressed the cultural content of Japanese nation, thus promoting a deep understanding of characteristics for Japanese animation which have a wide appeal. In his masterpiece -, the characters building, plot describing, theme expressing, cultural meaning could be analyzed respectively by means of Ye Weiqu's 3 phases of Mono no aware aesthetic, reflecting how inherited the legacy of Japanese classical aesthetics. Furthermore, based on the analysis method, the animation contributed tremendously to Japanese classical aesthetics and Mono no aware aesthetics. Tradition for classical aesthetics could play a role as a creative tool for contemporary and future animation.