• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.127-136
• /
• 2005

Recently, the damages occurring from the malware are increasing rapidly, regardless of continuous development of commercial vaccines . Generally, the vaccine detects well-known malware effectively, but it becomes helpless without any information against the unknown ones. Also, the malware generates its variations fast enough, so that the vaccine always gets behind in its updates. In this paper, we are describing a design and development of malware detection tool, which can detect such malware effectively. We first analyze the general functionality of the malware, and then extracts specific signatures. Such that, we can actively cope with a malware, which may come in previous type, a new type, and any of its mutations also.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1087-1094
• /
• 2004

Normally, formalization and standardization are followed while doing any system analysis and design. But, in actual system development, products can't be written using the automated tool for all products due to their own characteristics. That results the inconsistency among development products and various kinds of problem can occur in the products. In this paper, we present a technique that supports consistency among products of analysis and design phase developed according to object oriented method. And, this paper also presents the implementation tool.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.253-257
• /
• 2003

CDMA 방식의 디지털 이동통신 망은 기존의 2G 방식에서 IX, IxEV-DO을 거쳐 WCDMA로 비약적으로 발전하고 있으며, 이에 따라 무선망 운용 및 최적화 방법도 진화해가고 있다. 운용자들이 Field Tool을 사용하여 직접 Field 데이터를 측정, 분석하고 조치하는 방식이 가장 기본적인 방법이라면, Field 데이터와 Network 데이터를 함께 수집하여 분석하는, 보다. 발전된 방법도 사용되고 있다. 그러나, 이러한 방법도 여러 Tool에서 데이터를 off-line으로 수집한 후 분석 작업을 수동으로 반복 수행해야하는 번거로움이 있어, 실시간 on-line 무선망 최적화 시스템을 통한 체계적이고 과학적인 운용 방법을 생각해 볼 수 있다. 우선, 타 운용 Tool 들과의 on-line 연동으로 중앙 집중적 데이터베이스를 구축하여, 무선망에 관련된 모든 데이터에 대한 통합적인 관리가 필요하다. 이 데이터베이스를 이용하여, 실시간으로 무선망 성능 및 효율 저하 원인 분석을 실시하며, 분석된 결과는 기지국의 상태 및 문제점 도출에서부터 최종 처방까지 제시해준다. 본 논문에서는 이러한 솔루션을 구축하기 위한 다양한 네트웍 데이터 연동(성능, 장애, 구성, RF, 실측 데이터 등), 주요 KPI (Key Performance Indicator) 모니터링, 통계적 분석, 무선망 분석 등에 대해 고찰해본다.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.3
• /
• pp.117-131
• /
• 2001

This study was attempted to develope a highly reliable and valid tool which is useful to assess the Korean obese adolescents' stress and coping method. The data were collected from the total of 600 obese students from middle and high schools in Pusan. The author used a convenience sampling method. The data collection was done from March 2 to July 11, 1999. The analysis of the data was done with SPSS Win(10.0) for descriptive statistics and factor analysis. The preliminary tool was composed of 72 items(stress items: 34, coping method items: 38) with the five point Likert scale. Item analysis and inter consistency were calculated for reliability and validity through pre-test. The preliminary tool was analyzed for reliability and validity. Finally, the tool was of 65 items(stress items: 33, coping method items: 32). The results were as follows: 1. Cronbach Coefficient Alpha for the 33 items of stress was .9485 and the 32 items of coping method was .8534. 2. The factor analysis was done in order to confirm construction and the items were extracted Oblimin rotation and Maximum likelihood extraction method. 3. The factor analysis showed 6 factors in stress and 10 factors in coping method. These 6 factors of stress explained 62.4％ and 10 factors of coping method explained 57.4％. 4. Six factor of stress lable were 〈outward appearance〉, 〈boyfriend/ girlfriend〉, 〈occur an outbreak of disease〉, 〈mutual relation of family〉, 〈an obese figure〉, 〈be a burden on exercise〉. 5. Ten factor of coping method lable were 〈be concerned about another affairs〉, 〈recreation activities〉, 〈self-violence〉, 〈relaxation〉, 〈hobby activities〉, 〈avoid a situation〉, 〈communication〉, 〈music〉, 〈negative behavior〉, 〈positive thinking〉. The results of using this scale in a study will contribute to design an appropriate school health management of obese students, and also it will contribute to the development of nursing research.

• Journal of Internet Computing and Services
• /
• v.5 no.4
• /
• pp.11-22
• /
• 2004

Works that improve the process and notify the improved process, the product and the change of tasks to all users are essential in achieving project. Existent project management tools support the definition and the change of project activities, and configuration management tools support version check, workspace management. build management. etc. It costs too much to buy each tool. as well as, it is burdensome to learn usage for various tools. Therefore the web-based integrated tool is proposed to manage the process and artifacts at a time in this paper. The proposed tool defines component based development process model. and achieves recording of process progression, processing the request of change, reporting the progression of each task, product registering and change, version recording, artifact or form search, etc. using ebXML. Furthermore, the stakeholders get the systematic management and standardization by sharing information that are necessary in process achievement and configuration management in distributed environment using the integrated management tool.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2350-2355
• /
• 2015

A tool was developed in this research for automation of one-dimensional finite element analysis (1D FEA) for design of a machine tool spindle system composed mainly of a shaft and bearings. As it is based on object-oriented programing, it uses the objects of a CAD system. It requires minimum data to be input to define the spindle system such as shaft cross-sections and bearing stiffness. Then, it automatically generates the geometric model based on the data and then, converts it into the FE model of 1D beams and springs. The graphic user interfaces developed allow a user to interact with the tool. This tool can be applied to identification of a near optimal design of the spindle system in minimum time and efforts by automating the FEA process with numerous design changes.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.3
• /
• pp.41-44
• /
• 2016

In development environment focused on computers, the ideas of app developring tool have been presented in terms of improved software productivity. Historically, for smart applications, app developing tools have not yet effectively developed or initiated locally or internationally. Therefore, developer have difficulty in studying developing process due to the difficulties of text based language. The basic concept of a new innovative App development tool, App Developing Tool, which has been proposed in this study and enables to apply on-site requirements to smart phones, is to develop Apps on the level using easy-to-learn Word or Excel in a computer. App developing tool is developed process focus instead of program focus by introducing SOA(Service-oriented Architecture) to develop reasonably reusable service units. Since service-oriented architecture allows reusing by service unit when there are changes in a specific process or service, it is possible to provide a new function by replacing the service instead of developing a new program.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.177-186
• /
• 2006

This paper presents the development of a certain highly efficient authoring tool for constructing realistic 3D virtual space using image-based rendering techniques based on a virtual space map. Unlike conventional techniques such as TIP, for constructing a small 3D virtual space using single image, the authoring tool developed herein produces a wide 3D virtual space using multiple images. This tool is designed for constructing each small 3D virtual space for each input image, and for interconnecting these 3D virtual spaces into a wide 3D virtual space using a virtual space map. The map consists of three elements such as specific room, link point and passageway, and three directions. It contains various information such as the connection structure, the navigation information and so on. Also, the tool contains a user interface that let users construct the wide 3D virtual space easily.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.721-732
• /
• 1995

The IPSE(Integrated Project Support Environment) tool can be seen as a result of an attempt to synthesize the key aspects of language-centered, specific methodology-based and toolkit oriented environments, which are current CASE tools into an organic whole. The IPSE approach based on a process model is regarded as an effective way to implement integrated CASE. The PM-CASE(Process Model based CASE) tool is currently a prototype which draw diagrams describing processes by using a new modeling technique. Attributes related with a task of withen the process model should be defined an saved the database. These attributed are used to retrieve the information of products, and to call the tool related which the task. In this paper, TSEE(Process centered Software Engineering Environment) tools are compared and analyzed. By describing the basic concept, architecture and design of PM-CASE tool, a method of building an process model-based CASE tool is proposed be support an effect software development and management.