• 농촌지도와개발
• /
• 제5권1호
• /
• pp.93-102
• /
• 1998

The objectives of the study were 1) to make the reasonable standard, 2) to select the objective and scientific method and process for the location-allocation of a new provincial capital city. The Main standard of location-allocation were suggested as follows ; 1) Integration of province 2) Convenience of Administration service 3) Accomodations of new provincial capital city 4) Balanced development by region. The validity of location-allocation were reviewed the population potentials and nodal accessibilities. The population potential was examined to find the maximum point of administrative demand, and the locationallocation model was examined to find the minimum point of the aggregated travel-cost to a proposed provincial government office. The nodal accessibilities measured in travel-time distance and actual values. Two major concerns in locating public facilities are efficiency and equity.

• 경영과학
• /
• 제20권2호
• /
• pp.179-196
• /
• 2003

Function point model is the international standard method to measure the software size which is one of the most important factors to determine the software development cost. Function point model can successfully be applied only when the detailed specification of users' requirements is available. In the domestic public sector, however, the budgeting for software projects is carried out before the requirements of softwares ere specified in detail. Therefore, an efficient function point estimation method is required to apply function point model at the early stage of software development projects. The purpose of this paper is to compare various function point estimation methods and analyse their accuracies in domestic software projects. We consider four methods : NESMA model, ISBSG model, the simplified function point model and the backfiring method. The methods are applied to about one hundred of domestic projects, and their estimation errors are compared. The results can used as a criterion to select an adequate estimation model for function point counts.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.329-335
• /
• 2019

본 연구에서는 특정 유도무기체계에 대한 신뢰도 성장 분석을 수행하였다. 개발단계에서의 시험을 통해 고장 모드와 원인을 식별하고 시험 중 발견된 고장을 분석하여 지속적인 관리 활동을 수행하고 있다. 해당 유도무기체계는 유도탄과 발사 체계로 구성되어 있으며, 각 장비의 시험 결과에 따라 신뢰도 성장 분석을 실시하였다. 유도탄의 경우에는 일회성 무기로 성공과 실패인 이산형 데이터로 시험 결과를 획득하였다. 발사체계의 경우에는 시험에서 지속해서 장비 운용을 하여 연속형 데이터로 시험 결과를 획득하였다. 각각의 시험 결과 형태로 신뢰도 성장 모델을 Standard Gompertz 모델과 Crow-Extended 모델을 적용하였다. 해당 모델을 사용하여 현재까지 수행한 시험 결과에 대한 신뢰도 성장 분석 결과를 확인하였다. 또한 미래에 수행될 시험 결과를 가정하여 신뢰도 성장 결과를 예측할 수 있었다. 본 연구는 해당 유도무기체계의 신뢰도 목표값을 달성하고 시험 횟수를 결정하는데 있어 유용하게 활용될 수 있을 것이다. 그리고 이후 계획된 시험을 확인하여 해당 유도무기체계에 대한 신뢰도 성장 관리를 지속적으로 추진할 예정이다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.781-790
• /
• 2013

본 연구에서는 평균건설단가를 적용하여 개략 공사비를 산출하는 기존 방식에서 벗어나 대표공종을 이용한 입력변수 도출 모델을 구축하여 기본설계단계에서 고려되어지는 여러 입력변수들을 활용하여 P.S.C(Prestressed Concrete) Box Girder 교량에서 널리 활용되고 있는 I.L.M(Incremental Launching Method) 공법에 연구 모델을 적용하고자 한다. 2000년부터 설계된 공사비 데이터와 설계자료 등을 분석하여 상부공사 중 총 공사비대비 누적비율 95%이상을 차지하는 공종을 대표공종으로 도출하였다. 각 대표공종의 하위공종에 대한 내역 분기를 실시하여 각 항목들의 Database를 구축하였다. 본 연구에서는 다각적인 측면에서 개략공사비 산정 모델을 개발 및 제시하였으며, 사용자 입장에서 보다 쉽게 접근할 수 있도록 대표공종을 기초로 단위물량을 사용한 개략공사비 산정모델(I)과 상관성이 높은 입력변수를 선택한 개략공사비 산정모델(II)과 상관계수 0.6이상의 입력변수들을 모두 포함하는 다중회귀분석을 통한 개략공사비 산정모델(III)을 제시한다. 실제 총공사비와 본 연구에서 제시하는 개략공사비 산정모델들을 비교하고, 신뢰성을 검증함으로써 현재 국내에서 사용되는 산정방법에 비해 정밀도 측면에서 효율적인 공사비 관리방법을 제시한다.

• STI Policy Review
• /
• 제8권1호
• /
• pp.113-156
• /
• 2017

Although technological progress is considered a key element for economic growth and development of a country, strong empirical evidence in this regard is not available yet. Therefore, to establish the empirical link between technology progress and economic development, it is advisable to carry out a time series analysis. In this regard, the Technology Achievement Index (TAI) of 100 top economies has been developed to examine the position of countries' technological progress for the 21 years spanning 1995 to 2015. Countries have been ranked on their TAI which is based on four pillars; technology creation, diffusion of older innovations, diffusion of recent innovations, and development of human skills. As well, this current study re-calculates the Humane Development Index (HDI) of 100 top economies for the 21 years from 1995 to 2015. Ranking of countries' HDI values reflects three dimensions: A long lifespan (life expectancy index), knowledge (Education Index) and a decent standard of living (Gross National Income Index, or GNI). The Standard Deviation (SD) technique has been used to investigate the technological gap between individual countries and groups of countries or regions. For a more meaningful assessment, technological gaps from the maximum achievement value (i.e., one of the countries under study) are presented as well. To investigate the impact of technological progress on economic development, this study introduces a model in which the HDI is used as the dependent variable and the TAI and Gross Capital Formation (GCF) are used as independent variables. The HDI, TAI and GCF are used in this model as proxy variables for economic development, technological progress and capital respectively. Econometric techniques have been used to show the impact of technological progress on economic development. The results show that long-term associations exist between technology progress and economic development; the impact of technology progress on economic development is 13.2% while the impact is 4.3% higher in eight selected East South Asian countries, at 13.5%, than in eight selected highly developed countries (9.2%).

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.74-81
• /
• 2012

The purpose of this study provides the theoretical model for protecting the economic and social loss from the current alternative fuel vehicle which is developed without compatibility and senseless one's own through verifying the statistical significant by method of measuring analysis. The market scale of alternative fuel vehicle depends on customer's and station's expectation about the number of potential vehicle users. It is very difficult for vehicle manufacturer to make a decision on the standard alternative fuel vehicle as it might reduce profit and market share. Accordingly, the development of alternative fuel vehicle should have manufacturer confident on the potential profit in the future. Moreover, if we decide to use the non-standard fuel after we started to use the standard fuel, it would take a huge cost comparing with starting to use the standard fuel only. As a result, once one of companies starts to provide the non-standard fuel service, it is getting more difficult to use the standard fuel going forward. Consequently, we may review the possibility of choice on the standard fuel before the vehicle manufacturer starts service with non-standard fuel.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.53-58
• /
• 1998

This paper concentrates on the development of a computational design program to determine nozzle size in water jet, combing the numerical optimization technique with the flow analysis code. To achieve the above objective, a two-dimensional model was developed for investigating the fluid flow in water jet and calculating the velocity and pressure distributions. The mathematical formulation as a standard ${k}-\varepsilon$ model was solved employing a general thermo fluid-mechanics computer program, PHOENICS code, which is based on the Semi-Implicit Method Pressure Linked Equations(SIMPLE) algorithm. The developed code was applied to water jet design to determine the nozzle size, and investigated the effect of the change of nozzle location. Calculated results showed that the flow pattern is not changed as the change of nozzle location.

• 한국BIM학회 논문집
• /
• 제10권1호
• /
• pp.9-22
• /
• 2020

Recently, BIM has been extended to infrastructures such as roads and bridges, and the demand for BIM standard development for ports is increasing internationally. Due to the low level of utilization of classification system and drawing standards compared to other infrastructures, and the closed nature of national security facilities, ports have insufficient level of connection and sharing environment among external systems or users. In addition, since the standardization of data for port facilities is not made, it is still necessary to establish an independent DB for each system and to ensure interoperability of data between these systems since it does not have a shared environment among similar data. Therefore, the purpose of this study is to develop and verify IFC, the international standard for BIM, in order to cope with the BIM environment and to be commonly used in the design, construction, and maintenance of port facilities. To this end, we build a standard schema with port-specific Express Notation according to buildingSMART International's standard development methodology. First, domestic and international reference model standards were analyzed to derive components such as space and facilities of port facilities. Based on this, the components of the port facility were derived through the codification, categorization, and normalization process developed by the research team. This was extended based on the port BIM object classification system developed by the research team. Normalization results were verified by designers and associations. Then, IFC schema construction was based on Express-G data modeling based on IFC 4 * 2 Candidate, which is a bridge candidate standard based on IFC4 (ISO16739), and IFC 4 * 3 Draft, which is developed by buildingSMART International. The final schema was validated using the commercialized validation tool. In addition, in order to verify the structural verification of the port IFC schema, the transformation process was verified by converting the caisson model into a Part21 file. In the future, this result will not only be used as a delivery standard for port BIM products, but will also be applied as a linkage standard between systems and a common data format for port BIM platforms when BIM is used in the maintenance phase. In particular, it is expected to be used as a core standard for data exchange in the port maintenance stage.

• 시스템엔지니어링학술지
• /
• 제4권1호
• /
• pp.11-18
• /
• 2008

As a government agency or the Government-donated Research Institute or industrial research institute is intended to develop a product or to construct a system such as a railway safety systems by research and development process, a life cycle model leading a product development or a research and development is essential to them to systematically and effectively progress it. In this paper, the refined life cycle model to effectively conduct the national railway safety project consists of the life cycle phases and their detail descriptions with reference to other life cycle model in the international standard and the other national guidance and other industrial domain such as ship-building, weapon system, and aerospace areas, the proposed life cycle model in the paper considerably reflects the characteristics of the traditional research and development project in railway safety domain. A guidance of a life cycle model which based on lots of the life cycle model in other domains proposes additionally.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.79-85
• /
• 2021

A standard engineering model that reflects the current organization system and engineering operation process of domestic nuclear power plants was developed based on the Standard Nuclear Performance Model developed by the American Nuclear Energy Association. The level 0 screen, which is the main screen of the engineering model computer system, consisted of an object tree structure, which provided information that is phased down from a higher structure level to a lower structure level (i.e., level 3). The level 1 screen provided information related to the sub-process of the engineering operation, whereas the Level 2 screen provided information related to each engineering operation activity. In addition, the Level 2 screen provided additional functions, such as linking electronic procedures/guidelines, providing electronic performance forms, and connecting legacy computer systems (such as total equipment reliability monitoring system, configuration management systems, technical information systems, risk monitoring systems, regulatory information, and electronic drawing system). This screen level increased the convenience of user's engineering tasks by implementing them. The computerization of an engineering model that connects the entire engineering tasks of an establishment enables the easy understanding of information related to the engineering process before and after the operation, and builds a foundation for the enhancement of the work efficiency and employee capacity. In addition, KHNP developed an online training module, which operates as an e-learning process, on the overview and utilization of a standard engineering model to expand the understanding of standard engineering models by plant employees and to secure competitiveness.