• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2022

The N-value from the Standard Penetration Test (SPT), which is one of the representative in-situ test, is an important index that provides basic geological information and the depth of the bearing layer for the design of geotechnical structures. In the aspect of time and cost-effectiveness, there is a need to carry out a representative sampling test. However, the various variability and uncertainty are existing in the soil layer, so it is difficult to grasp the characteristics of the entire field from the limited test results. Thus the spatial interpolation techniques such as Kriging and IDW (inverse distance weighted) have been used for predicting unknown point from existing data. Recently, in order to increase the accuracy of interpolation results, studies that combine the geotechnics and deep learning method have been conducted. In this study, based on the SPT results of about 22,000 holes of ground survey, a comparative study was conducted to predict the depth of the bearing layer using deep learning methods and IDW. The average error among the prediction results of the bearing layer of each analysis model was 3.01 m for IDW, 3.22 m and 2.46 m for fully connected network and PointNet, respectively. The standard deviation was 3.99 for IDW, 3.95 and 3.54 for fully connected network and PointNet. As a result, the point net deep learing algorithm showed improved results compared to IDW and other deep learning method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.205-214
• /
• 2013

The study of the compatibility of EPUB DRM, granted by the Korea Copyright Commission, as a CT R & D project (Project Title: Development of standard reference software technology for the International Standard EPUB-based eBook DRM) developed standards such as profile standards for encryption, digital signature and authentication certificates and standards for technical terms of rights information. In 2012, these four standards have been established as the Korean Industrial Standards under the names of 'Encryption specification for EPUB DRM', 'the Digital signature specification for EPUB DRM', 'the Certificate specification for EPUB DRM', and 'Definitions of Right Terms for EPUB DRM' through the ODPF(Open Digital Standardization Forum) and the TTA(Telecommunications Technology Association). In spite of the establishment of the eBook DRM standards, however, the absence of the standard technology which supports the compatibility for issues and changes of licenses makes it unable to use eBooks served by different eBook distributors. This study tries to investigate technological approaches to methods of license issues supporting eBook DRM compatibility on the basis of the above-mentioned four EPUB DRM standards and to provide an industrially accepted technological model.

• Journal of The Korean Association of Information Education
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2019

From 2019, software education has become a required subject for all elementary school students. However, many teachers are still unfamiliar with how the classes should be instructed. So this paper presented the meaning, detailed competencies and achievement standard in order to help in the collection, analysis and representation of data among the computational thinking that are key to software education. And it also suggested the applicability of the classes. The full course of the paper is summarized as follows. First, existing studies have summarized the meaning, detail and achievement standard of data related competencies. Based on this, a preliminary investigation was instructed. Pilot study carried out both FGI and closed questions at the same time. This was done in response to the survey's questionnaire reflecting the opinions of experts. Second, the results of the questionnaire generated as a result of the above were verified for validity, stability, and reliability among the PhD, PhD courses, software education teachers, and software education workers. Third, I developed and applied the five lessons as a class objective as 'Choosing collection method-Select the collection method according to the problem situation.', 'Searching for meaning of data-Understand what the analyzed data mean..', 'Using various expression methods-Use a variety of expression tools.' using the backward design model to integrate education, class, and assessment. As a result, the detailed competencies of data collection, analysis, and representation and achievement standard were presented. This may help in setting specific and specific criteria for what direction classes are recommended when planning data-related classes in elementary schools.

• Korean Journal of Artificial Intelligence
• /
• v.7 no.1
• /
• pp.23-59
• /
• 2019

The purpose of this study is to develop a measure of service quality in the traditional market by examining previous research on the service quality of the traditional market studied so far. After defining basic concepts through definition of traditional market and existing studies, 5 categories of configuration items for SERVQUAL measurement in traditional market were made up based on existing researches related to definition of service quality and service quality of traditional market. A survey was conducted on the items that fit the intention of this study and various statistical analyzes were conducted. Statistical analysis was performed using SPSS 22.0 and AMOS 22.0. The reliability of the items was measured by the reliability test, and the predictability and accuracy of the items were examined. The validity of the measured variables was verified through confirmatory factor analysis. Reliability, empathy, responsiveness, certainty, and tangibility were the most important factors in this study. Responsiveness factors include communication, time reduction, real time, promptness. Assurance factors include the assurance of delivery, prompt answers, product knowledge items. Tangibility factors include, convenient device systems, location information, presence as a fact, and as a result, the latest modern items are adopted. The quality of service in the traditional market developed in this study was found to be good in reliability and validity test. Confirmatory factor analysis result using structural equation model also met the conformity index standard. If service satisfaction is measured based on this research, basic data can be presented to policy makers who implement policies on traditional markets to make the right decisions. In addition, it will be able to provide traditional market operators with operational strategy and marketing data. In the future, based on the traditional market service quality scale developed in this study, it is necessary to grasp the factors to be continuously managed to improve the service quality of the traditional market, user satisfaction, and intention to use.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.3
• /
• pp.89-99
• /
• 2019

The project to utilize kenaf as thermal power plant fuel has a positive effect on the unused energy utilization, greenhouse gas reduction, and farm income. However, it is analyzed that it is difficult to secure economical efficiency because the fuel cost of kenaf is higher than that of power by thermal power plant and Renewable Energy Certification (REC). The project of power generation using kenaf is meet the government's major policies, while government support is essential for securing economical efficiency. As a result of the sensitivity analysis on the ratio of the government subsidies, to secure economical efficiency, the power generation prices using kenaf through the direct financial support of the government indicate that 47% and 76% of kenaf fuel cost are supported by government in case of the Saemangeum reclamation and Gangneung-si, respectively. In the case of the government indirect policy support, if kenaf is included as a renewable energy source of Renewable Energy Portfolio Standard and REC is granted, the economic efficiency of Saemangeum reclamation and Gangneung-si is obtained when REC secured at 1.05 or more and 2.43 or more, respectively. The results of this study are meaningful in that the direct and indirect effects of the government on the development of the herbaceous energy crop, kenaf, were evaluated economically. These results are to suggest the need for demonstration study, but economics analyze and evaluate are necessary based on operational data through the demonstration phase in the future.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.4
• /
• pp.49-65
• /
• 2011

The survey method was used in this descriptive study. The purpose in this study was to investigate middle school home economics(HE) teachers' stages of concern, levels of use, and perception about career education, based on the Concerns Based Adoption Model(CBAM). Questionnaire was administrated to middle school HE teachers over the whole country except Jeju Island through mail or e-mail by systematic random sampling. 118 data collected from the responses were finally analyzed statistically with mean, standard deviation, frequencies, percentage, and independent-sample t-test by using SPSS/WIN 12.0 program. The results of the study were as follows: First, most-HE teachers were in stages of the personal concern (86.56) and the informational concern(85.42) about HE career education. Second, the highest number of teachers was in level of refinement(33.1%) use. Third, teachers recognized important goal of HE career education as 'understanding of diverse careers and formating of positive values and attitude about work'. Also they had generally conducted HE career education through 'Understanding Teenager' chapter of a first-year middle school. However they had struggled with difficulty such as lack of data, time, and expertise in conducting HE career education. Therefore, it is necessary that support such as development, supplies, and training opportunities of career education should be provided.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.235-246
• /
• 2008

Service-Oriented Architecture (SOA) is emerging as an effective approach for developing applications by dynamically discovering and composing reusable services. Generally, the benefits of SOA are known as low-development cost, high agility, high scalability, business level reuse, etc. However, a representative problem for widely applying SOA is the performance problem. This is caused by the nature of SOA such as service deployment and execution in distributed environment, heterogeneity of service platforms, use of a standard message format, etc. Therefore, performance problem has to be overcome to effectively apply SOA, and service performance has to be measured precisely to analyze where and why the problem has occurred. Prerequisite for this is a definition of a quality model to effectively measure service performance. However, current works on service performance lacks in defining a practical and precise quality model for measuring performance which adequately addresses the execution environment and features of SOA. Hence, in this paper, we define a quality model which includes a set of practical metrics for measuring service performance and an effective technique to measure the value of the proposed metrics. In addition, we apply the metrics for Hotel Reservation Service System (HRSS) to show the practicability and usefulness of the proposed metrics.

• Wind and Structures
• /
• v.27 no.3
• /
• pp.163-173
• /
• 2018

The design wind pressure for low-rise buildings in the ASCE 7-10 is defined by procedures that are categorized into the Main Wind Force-Resisting System (MWFRS) and the Components and Cladding (C&C). Some of these procedures were originally developed based on steel portal frames of industrial buildings, while the residential structures are a completely different structural system, most of which are designed as low-rise light-frame wood constructions. The purpose of this study is to discuss the rationality (or irrationality) of the extension of the wind loads calculated by the ASCE 7-10 to the light-frame wood residential buildings that represent the most vulnerable structures under extreme wind conditions. To serve this purpose, the same approach as used in the development of Chapter 28 of the ASCE 7-10 that envelops peak responses is adopted in the present study. Database-assisted design (DAD) methodology is used by applying the dynamic wind loads from Louisiana State University (LSU) database on a typical residential building model to assess the applicability of the standard by comparing the induced responses. Rather than the postulated critical member demands on the industrial building such as the bending moments at the knee, the maximum values at the critical points for wood frame buildings under wind loads are used as indicators for the comparison. Then, the critical members are identified through these indicators in terms of the displacement or the uplift force at connections and roof envelope. As a result, some situations for each of the ASCE 7 procedures yielding unconservative wind loads on the typical low-rise residential building are identified.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.119-132
• /
• 2012

Biodiversity is a key element of ecosystem of which function provides essential product and service in human life. In the course since development projects often causes damages to biodiversity, environmental impact assessment technique must be capable of accurately assessing potential impact from flora and fauna and to entire ecosystem. Korea needs improvement of its assessment technique that is compatible with Korean environmental regulatory standard that is generally stricter than that of most countries. This study attempts to explore both domestic and overseas biodiversity assessment techniques and analyze each stage of environmental impact assessment. The data is collected from numbers of literatures selected by navigating both domestic and overseas literature database with certain keywords. Among the 44 selected papers, overseas publications outnumber those of domestics, and there are more researches on assessment methodology of biodiversity than assessment tool and model. In terms of environmental impact assessment, the number of papers on environmental impact forecast exceeds the numbers of papers on current state of environment and the impact minimizing solution. Therefore, contents and trends of those researches in the different stages of environmental impact assessment discussed in this paper not only suggest potential impact on biodiversity and minimization solutions in detail, but is also a valuable resource particularly for biodiversity relevant environmental assessment technique improvement in Korea. Proposing of a new direction of improvement in biodiversity assessment techniques makes this study significant, and further research for preservation of biodiversity should follow up to provide an improvement scheme for biodiversity assessment techniques in the future.