• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.90-100
• /
• 2015

Reliability growth rate (or reliability growth curve slope) have the two cases of trend as a constant or changing one during the reliability growth testing. The changing case is very common situation. The reasons of reliability growth rate changing are that the failures to follow the NHPP (None-Homogeneous Poisson Process), and the solutions implemented during test to break out other problems or not to take out all of the root cause permanently. If the changing were big, the "Goodness of Fit (GOF)" of reliability growth curve to test data would be very low and then reduce the accuracy of assessing result with test data. In this research, we are using Duane model and AMSAA model for assessing test data and projecting the reliability level of complex and repairable system as like construction equipment and vehicle. In case of no changing in reliability growth rate, it is reasonable for reliability engineer to implement the original Duane model (1964) and Crow-AMSAA model (1975) for the assessment and projection activity. However, in case of reliability growth rate changing, it is necessary to find the method to increase the "GOF" of reliability growth curves to test data. To increase GOF of reliability growth curves, it is necessary to find the proper parameter calculation method of interesting reliability growth models that are applicable to the situation of reliability growth rate changing. Since the Duane and AMSAA models have a characteristic to get more strong influence from the initial test (or failure) data than the latest one, the both models have a limitation to contain the latest test data information that is more important and better to assess test data in view of accuracy, especially when the reliability growth rate changing. The main objective of this research is to find the parameter calculation method to reflect the latest test data in the case of reliability growth rate changing. According to my experience in vehicle and construction equipment developments over 18 years, over the 90% in the total development cases are with such changing during the developing test. The objective of this research was to develop the newly assessing method and the process for GOF level increasing in case of reliability growth rate changing that would contribute to achieve more accurate assessing and projecting result. We also developed the new evaluation method for GOF that are applicable to the both models as Duane and AMSAA, so it is possible to compare it between models and check the effectiveness of new parameter calculation methods in any interesting situation. These research results can reduce the decision error for development process and business control with the accurately assessing and projecting result.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.176-182
• /
• 2012

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.143-152
• /
• 2010

Development and verification of whole vibration test system was requested for developing a geostationary satellite. This satellite is enlarged significantly compared with fore-satellite in KARI. For vertical vibration test, new vertical vibration system was developed. For lateral vibration test, thermal equilibrium test was performed because of difference of thermal characteristics between test adapter and slip table. And lateral vibration system performance for overturning moment was verified by analysis and test. As the number of acquisition channels was increased, new shaker control and data acquisition system was installed. In this paper, verification process and techniques to improve test stability are introduced for the whole vibration test system.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.75-77
• /
• 2006

In this paper, the technology of the conformance test for Broadcast Web Site Service (BWS) which is one of the data services of the T-DMB (Terrestrial Digital Multimedia Broadcasting) is proposed. First, the standard of the BWS Service is introduced and then the method of the conformance test of BWS bitstream and BWS receiver module is provided. A BWS bitstream analyzer is implemented for use in verifying the transmitted BWS bitstreams. To provide a means for the receiver manufactures to verify their own BWS receiver modules, a receiver test suite is developed including BWS test bitstreams and a BWS reference receiver module. The BWS bitstream analyzer includes the analysis function for the conformance test of MOT protocol, HTML, PNG, MNG, JPEG, and Ecma Script. Also, it was actually used for verifying the BWS test bitstreams. In the course of developing a HWS receiver module, 4he BWS receiver module under test can be verified by comparing the results of the BWS reference receiver module with those of the receiver module under test. when the same BWS test bitstreams are fed into the two receiver modules.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.23-46
• /
• 2007

The purpose of this study was to present improvement directions of college scholastic ability test on industry department. Industry department test were classify and abstracted sampling test on contents and movement domain, analyzed example items of college scholastic ability test on industry department. Research methods used in this study were review of related literature, the item analysis and item pattern analysis between college scholastic ability test on introduction to industry and curriculum, contents of textbook. After finding a problem of developing items, trying to find a solution to the problem and developing an up-to-date method of items was to present improvement. Based on the result of the study, some recommendations for future researches were made as follows: First, a phenomenon of making same contents items over again and no making items not on made the items ever have to cut. Second, Time to read and make sense of items have to reduce because depend on the degree of difficulty related on time to understand of items. Third, the depth of textbook contents has to develop on curriculum this year. Fourth, the succeeding study on linkage between college scholastic ability test and simulation of college scholastic ability test. Fifth, verification validity on contents of new movement domain is developed new and striking test items.

• School Mathematics
• /
• v.10 no.1
• /
• pp.79-103
• /
• 2008

The purpose of this study is for developing and using project tasks which can be used to connect schooling and home education for the other days of 5days-schooling; to promote students' mathematical ability and to let students have positive cognitions toward mathematics and self-controled learning attitudes. For this study, two classes of 4th graders(56 students) were sampled from a school in D city. Half of them were assigned to the experiment group(EG) and the other to comparison group(CG). In the experiment group, students completed 16 project tasks and we investigated whether there is an effect on students' academic achievement and mathematical disposition. Two kinds of test instruments, pre-test and post-test were used. The pre-test scores guaranteed that both groups were homogeneous. Post-test scores were used to identify three effects and the post-test scores were analyzed by t-test. The result of this study is as follows: (1) There was significant difference between EG and CG in academic achievement (p=0.010). (2) There was significant difference between EG and CG in mathematical disposition(p=0.007). (3) There was no significant difference between EG's pre-test and post-test in mathematical disposition at the 5% significant level. But the average score of mathematical disposition improved from 3.3333 to 3.5375. Mathematical disposition was composed of 6 factors. One of them was mathematical value and there was significant difference between EG's pre-test and post-test at the 5% significance level(p=0.030). But other factors were not. The average scores of mathematical reflection improved a little. So we can say that the activities with project tasks brought an positive influence on students' mathematical disposition.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2008

The control and prediction of surface settlement, gradient and ground displacement are the main factors in shallow tunnel design and construction in urban area. For deformation analysis of shallow tunnel due to excavation it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigaties quantitatively the deformation behavior of shallow tunneling by model tunnel test and strain softening analysis Incorporating the reduction of shear stiffness and strength parameters. The comparison of model tunnel test result and numerical simulation using strain softening analysis showed good agreement in crown settlement, normalized subsidence settlement and developing shear bands above tunnel shoulder. In this study, it is blown that the strain softening modeling is applicable to the nonlinear deformation analysis of shallow tunnel.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.279-288
• /
• 2018

In this paper, we present the results of educational innovation case study using U-Learning Box and Ubiquitous-based Test(UBT) system for 6 sample primary schools in Nepal. As Nepal is considered to be a developing country with electricity problem to the school, the U-Learning Box, consisting of a small and easy-to-use tablet PC for teacher and a small smart beam with its own battery was evaluated as the optimum solution to support continuous basic English and hygiene education for these schools. And UBT technology using tablet PC was used to evaluate and analyze basic English learning ability of the students, which helped us realized that it is necessary to improve the educational environment and develop suitable educational contents. We hope that the global educational innovation using U-Learning Box and UBT technology will become a successful model for global equality of educational opportunity project for developing countries including Nepal.

• Journal of East-West Nursing Research
• /
• v.5 no.1
• /
• pp.7-18
• /
• 2000

This study was experienced study of one group pretest-posttest design to confirm the effects of Bu-Hang therapy on sore and the study of subjects were high-danger group of developing sore that were instituted in Chung-Book A area. The data collection was conducted 11 subjects of high-danger group on developing sore as participants agreed in study after assessing sore danger-degree of 30 subjects with institute administrator. The duration of study was carried out between March, 1999 and September, 2000. The instrumental tool of study was assessing tool of modified sore danger-degree that was based on Braden Scale(1985) by developing of Bergstorm. The subjects of study were applied on sore site or easily developing site by Geon-Hang technique, one time for one day. The assess of sore duration treatment period were measured area of sore, assessed state of skin by Bergstrom, Braden, Lanquzza & Holman(1987). The analysis of collected data were showed by frequency, percentage on demographic characteristics. And effects of Bu-Hang therapy on sore were confirmed by contrast comparison of signal-test or case studies. The results of study were described below. 1. Bu-Hang therapy effected to inhibit of developing sore and decrease of sign and symptom on sore in 11 subjects, all(P=.010). 2. Bu-Hang therapy decrease of sign and symptom on sore in 6 subjects of case studies, all(P=.031). Conclusively, Bu-Hang therapy will facilitate for nursing intervention on sore. But this study was difficult to confirm effects of Bu-Hang therapy pretest-posttest design. Therefore, Bu-Hang therapy is high enable to decrease for sore but, yet is needed to monitor affectively for nursing intervention.