• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7456-7462
• /
• 2015

본 논문에서는 중계기를 통해 다중 경로가 확보된 음영 지역에서 주파수 공간 블록 부호를 적용한 주파수 효율적인 SC-FDMA(Single Carrier-Frequency Division Multiple Access) 전송 시스템을 제안한다. 본 논문에서 제안된 시스템은 주기적 프리픽스 사용에 따른 주파수 효율 감소를 방지하기 위하여 주기적 프리픽스를 사용하지 않는다. 주기적 프리픽스를 사용하지 않음에 따라 훼손되는 채널 주기성을 중계기와 수신국의 수신기에서 복원함으로써, 주기적 프리픽스를 사용하지 않는 제안된 시스템의 성능이 충분한 주기적 프리픽스를 사용하는 기존 시스템의 성능과 거의 동일하여 시스템의 주파수 효율이 향상되는 것을 실험을 통해 확인할 수 있다.

• 한국항해항만학회지
• /
• 제48권2호
• /
• pp.125-136
• /
• 2024

This research presents an innovative integrated ethanol solid oxide fuel cell (SOFC) system designed for applications in marine vessels. The system incorporates an exhaust gas heat recovery mechanism. The high-temperature exhaust gas produced by the SOFC is efficiently recovered through a sequential process involving a gas turbine (GT), a regenerative system, steam Rankine cycles, and a waste heat boiler (WHB). A comprehensive thermodynamic analysis of this integrated SOFC-GT-SRC-WHB system was performed. A simulation of this proposed system was conducted using Aspen Hysys V12.1, and a genetic algorithm was employed to optimize the system parameters. Thermodynamic equations based on the first and second laws of thermodynamics were utilized to assess the system's performance. Additionally, the exergy destruction within the crucial system components was examined. The system is projected to achieve an energy efficiency of 58.44% and an exergy efficiency of 29.43%. Notably, the integrated high-temperature exhaust gas recovery systems contribute significantly, generating 1129.1 kW, which accounts for 22.9% of the total power generated. Furthermore, the waste heat boiler was designed to produce 900.8 kg/h of superheated vapor at 170 ℃ and 405 kP a, serving various onboard ship purposes, such as heating fuel oil and accommodations for seafarers and equipment.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.593-600
• /
• 2012

대형 선박의 추진용 디젤엔진에서 버려지는 배기가스의 열을 회수하기 위한 랭킨사이클이 적용된 발전시스템에 대하여 R245fa 및 water의 작동유체에 따른 그 엑서지 특성을 분석하였다. 그 이론적인 계산 결과로, R245fa에 대하여 터빈입구의 압력이 증가할수록 엑서지 효율 및 시스템의 엑서지 효율이 증가하였고, 엑서지 파괴율은 주로 응축기 및 증발기에서 상대적으로 높게 나타났다. 그리고 질량유량의 증가에 따라 시스템의 엑서지 효율이 증가하는 특성을 보였다. Water의 경우에, 증발기에서의 엑서지 파괴율은 R245fa의 경우와 유사하게 나타났지만, 터빈입구의 압력 및 질량유량 비율의 변동에 대하여 열원에 대한 엑서지 손실률이 가장 큰 폭으로 변동하였다.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.91-99
• /
• 2007

Modernity which is superficial phenomenon set off the mass scale for mass consumption and provide uniformly artificial environment. But natural destruction, environment pollution, resources exhaustion and so on has been caused by this and now ecology is threatened by destruction and damage beyond the limitation and human beings survival is even threatened. Accordingly furniture development for environment preservation considered environment problem is the urgent real situation. Recent paradigm is the concept of Eco-design which is the green design possible to live together in symbiosis, and new types of alternative furniture are needed in Korea as well. 'Furniture for disassembly' is presented as new method for alternative furniture. Furniture for disassembly can be presented by mainly two directions. The first main characteristic is what is assembled by the use of woodworking joints technique as an assembly structure system without any hardware. The second is what is presented as the structure possible to be assembled by simple manual tools with hardware without any glue. The advantages of furniture for disassembly are environment preservation, space application, transportation efficiency and shapeliness. In manufacture method which is different from present furniture, the application of traditional truss technique which uses various types of custom-made and connection technique in case of assemble structure system without hardware is the typical differences. This assembly method expects not only interest induction about assembly and disassembly of diagram per sub materials but also the development of emotion, the improvement of collaboration, space perception ability and shape sense, the improvement of solid body structure insight and so on, when it use in the furniture for children with the application to many kinds of structure with BANGDOOSANJ (Wedged), JUMUGJANGBU (Dovetail) or NABIEUNJANG (Dovetail Keys) and so on.

• 한국수산과학회지
• /
• 제36권5호
• /
• pp.528-534
• /
• 2003

The 2-D hydraulic experimental results for the submerged rubble-mound structure, we have been concerned with the slability/function characteristics of the structures by the effects of wave force, scour/deposition at the toe and the wave transmission ratio at the lee-side sea. So, to investigate the variation characteristics of the wave transmission ratio which depended on a geometrical structure of the submerged breakwater profiles, the critical conditions for the depth of submergence and crest width were obviously presented. In summary, the results lead us to the conclusion that the wave control capabilities of submerged breakwaters by the variation of the submergence depth is higher than about 4 times the degree at the efficiency than the that of crest width. The destruction of the covering block at the crest generated at the region which was located between the maximum and minimum damage curve, and it's maximum damage/failure station from the toe of the structure was $0.2\;L_s.$ As the wave transmission coefficient and the slope of the structure increase, the damage/failure ratio and the maximum scour depth at the toe was extended, respectively. When the maximum scour depth happened, the destruction of the covering block which was located at the toe generated at the front of the submerged rubble-mound breakwater. Finally, it was found from the results that the optimization of the structure may be obtained by the efficient decision of the submergence depth and crest width in the permissible range of the wave transmission ratio.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.520-528
• /
• 2007

A practical and efficient disposal of PCBs (polychlorinated biphenyls) in waste transformer oil by a chemical dechlorination process has been reported. The transformer oil containing commercial PCB mixtures (Aroclor 1242, 1254 and 1260) was treated by the required amounts of PEG 600 (polyethylene glycol 600), potassium hydroxide (KOH) and aluminum (Al), along with different reaction temperatures and times. The reaction of PEG with PCBs under basic condition produces arylpolyglycols, the products of nucleophilic aromatic substitution. The relative efficiencies of PCB treatment process were assessed in terms of destruction and removal efficiency (DRE, %). Under the experimental conditions of PEG600/KOH/Al/100 oC/2hr, average DRE of PCBs was approximately 78%, showing completely removal of PCBs containing 7-9 chlorines on two rings of biphenyl which appear later than PCB no. 183 (2,2',3,4,4',5',6-heptaCB) in retention time of GC/ECD. However, when increasing the reaction temperature and time to 150 oC and 240 min, average DRE of PCBs including the most toxic PCBs (PCB no. 77, 105, 118, 123 and 169) in PCB family reached 99.99% or better, with the exception of PCB no. 5 and 8 (2,3-diCB and 2,4'-diCB). In studying the reaction of PEG with PCBs, it confirmed that the process led to less chlorinated PCBs through a stepwise process with the successive elimination of chlorines. The process also permits complete recovery of treated transformer oil through simple segregating procedures.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.485-490
• /
• 2011

사불화탄소($CF_4$)는 반도체 제조공정에서 에칭과 반응기 세척에서 사용되어온 가스이다. $CF_4$는 적외선을 강하게 흡수하고 대기 중 잔류시간이 길어서 지구온난화에 영향을 미치기 때문에 고효율의 분해가 필요하다. 본 연구에서는 플라즈마와 워터젯을 결합하여 워터젯 글라이딩 아크 플라즈마 시스템을 개발하고, 이를 이용하여 $CF_4$를 고효율로 분해할 수 있도록 방전영역을 증가시키고 다량의 OH 라디칼을 생성시킬 수 있는 최적의 조업 조건을 결정하였다. 공정 실험 변수로는 워터젯 주입량, $CF_4$ 초기 농도, 전체 가스량과 주입에너지량(SEI : Specific energy input)을 선정하였다. 변수실험을 통하여 워터젯 주입량이 25.5 mL/min, $CF_4$ 초기 농도 2.2%, 전체 가스량 9.2 L/min, SEI 7.2 kJ/L일 때 $CF_4$ 분해율은 최고 97%까지 도달하였다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.919-926
• /
• 2023

To analyze the cause of the destruction of thin, carbon-backed lithium fluoride targets during a measurement of the fusion of ⁷Li and ¹⁷O, we estimate theoretically the lifetimes of carbon and LiF films due to sputtering, thermal evaporation, and lattice damage and compare them with the lifetime observed in the experiment. Sputtering yields and thermal evaporation rates in carbon and LiF films are too low to play significant roles in the destruction of the targets. We estimate the lifetime of the target due to lattice damage of the carbon backing and the LiF film using a previously reported model. In the experiment, elastically scattered target and beam ions were detected by surface silicon barrier (SSB) detectors so that the product of the beam flux and the target density could be monitored during the experiment. The areas of the targets exposed to different beam intensities and fluences were degraded and then perforated, forming holes with a diameter around the beam spot size. Overall, the target thickness tends to decrease linearly as a function of the beam fluence. However, the thickness also exhibits an increasing interval after SSB counts per beam ion decreases linearly, extending the target lifetime. The lifetime of thin LiF film as determined by lattice damage is calculated for the first time using a lattice damage model, and the calculated lifetime agrees well with the observed target lifetime during the experiment. In experiments using a thin LiF target to induce nuclear reactions, this study suggests methods to predict the lifetime of the LiF film and arrange the experimental plan for maximum efficiency.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.76-81
• /
• 2009

Thermal desorption systems are designed to remove organic compounds from solid matrices such as soils, sludges and filter cakes without thermally destroying them. It is a separation technology, not a destruction technology. Since it is a thermal process, there is a common belief that temperature is the only significant parameter to be monitored. While it is true that better removal efficiencies are usually achieved at higher temperatures, other factors must be considered. Since the process is governed by mass transfer, heating time and the amount of mixing are also key parameters in optimizing removal efficiency. Thermal desorption have been successfully used for just about every organic contaminant found to date. It has also been used to remove mercury. In the present study, the numerical simulation has been performed to investigate the characteristics of heat transfer of LTTD(low temperature thermal desorption). The commercial software, AMESIM was applied for analyzing the heat transfer process in the LTTD.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.116-122
• /
• 2007

A 2-step process for the safe disposal of chemical warfare agents(agent hydrolysis followed by incineration In the submerged-quench incinerator) was studied to obtain basic data for the design of pilot plant in the future. Sample materials used for the hydrolysis reaction were sarin(GB), sulfur mustard (HD), and methylphosphonic difluoride(DF). The hydrolysates of these materials were thermally destroyed in a submerged-quench incineration system. Experimental conditions for achieving destruction efficiency of 99.99% in both steps were established and phosphoric acid was recovered from the waste water when destroying DF hydrolysate in the incinerator. Treated water could be reused as process water for the agent hydrolysis.