• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.177-178
• /
• 2007

WiBro system provides reliable broadband communication services for mobile and portable subcribers. It allows interference-free reception under the conditions of multipath propagation and transmission errors. Thus, powerful channel-error correction ability Is required. CC/CTC Decoder which Is mandatory for WiBro system needs lots of computations for real-time operation. So, it is desired to design a CC/CTC Decoder having highly optimized hardware scheme for low latency operation under high data rates. This paper proposes an efficient CC/CTC Decoder structure for high data rate WiBro system. Particularly, the proposed CTC Decoder architecture reduces decoding delay by applying pipelining and multiple decoding blocks. Simulation results show that reduction of about 80% of processing time is enabled with the proposed CC/CTC Decoder despite of increase in are.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.193-197
• /
• 1997

In this paper, we propose a new PN chip clock generator which employs two synchronous counters to achieve precise phase control of chip clock. In a CDMA code acquisition and tracking system, the PN chip clock is required to operate highly reliable without any glitch even under harsh environment condition such as temperature and voltage fluctu-aliens. The digital implementation of the proposed PN chip clock generator imparts it with much desired reliability. Since the proposed chip clock generator can be easily controlled into one of the states: free running, phase advance, and delay state, it can be applied to data processing as well as code synchronization. We have done FPGA implementation of the proposed logic and have verified its satisfactory operation up to 50 MHz.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.189-198
• /
• 2002

Precoder has been shown to be able to provide source diversity and design flexibility. In this paper we employ precoding techniques for block transmission based on a multirate filterbank structure. To accommodate multiuser communication with variable data rates, different precoders with corresponding coefficients and up/down sampling rates are used. However, due to unknown multipath distortion, different interferences may exist in the received data, such as multiuser interference, intersymbol interference and interblock interference. To estimate channel parameters for a desired user, we employ all structured signature waveforms associated with different symbols of that user and apply subspace techniques. Therefore better performance of channel estimator can be achieved than the conventional subspace method based only on the signature of the current symbol. The delay for that user can also be jointly estimated. Channel identifiability conditions and asymptotic channel estimation error are investigated in detail. Numerical examples are provided to justify the proposed method. gest either multicode (MC) or multiple processing gain (MPG) mechanism [2], while requiring data rates to be integral multiples of some basic low-rate. In order to support variable rate transmission however, a comprehensive scheme needs to be investigated.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.449-458
• /
• 1999

In real-time systems, the accurate response time and minimal communication delay is highly desired. However, a conventional SNMP uses network resources inefficiently and introduces too much network traffic for periodic requests in particular. This paper presents an extended SNMP called Real-Time SNMP. It is designed to support real-time applications with time constraints to provide more accurate response time and less network traffic for periodic SNMP request PDU which is sent from a management station to agents. In addition, the module of the Real-Time SNMP agent works between management station and each SNMP agent to periodically generate requests for the associated agent. In this paper we have implemented the proposed Real-Time SNMP agent module and extended SNMP PDU. We also show the experimental results that indicated more punctual response time and reduced communication delay using the proposed Real-Time SNMP.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.419-424
• /
• 2019

In this paper, we proposed an algorithm to estimate the desired target in wideband jamming signal environment. In order to suppress the jamming signal, we use the spatial time adaptive algorithm and QR decomposition to obtain the optimal weight. The spatial time adaptive algorithm of adaptive array antenna system multiplies the tap delay signal by a complex weight to obtain a weight. In order to minimize the power consumption because of the inverse matrix, optimal weight is obtained by using QR decomposition. Through simulation, we compare and analyze the performance of the proposed algorithm and the existing algorithm. In the target estimation of [-40o,0o,+40o], the proposed algorithm estimated all three targets, but the existing algorithm estimated only [0o] due to of the jamming signal. We prove that the proposed algorithm improves performance by removing the jamming signal and estimating the target accurately.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.1-6
• /
• 2016

As IPTV has become one of the major Internet services, IPTV users and channels increase rapidly. However, the increased number of channels makes users difficult to find their desired channels. Along with this, the channel switching time of IPTV incurs serious user-perceived delay. To alleviate these problems, this paper presents hybrid schemes that combine channel prefetching and reordering schemes. Simulation experiments show that combining adjacency based prefetching and popular channel reordering reduces the channel seek time by up to 44.7% in comparison with the conventional channel seeking interfaces.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.31-36
• /
• 2014

Security of chaos communication system that has characteristic of sensitive initial conditions is superior to digital communication systems, but BER(Bit Error Rate) performance is evaluatied badly. So, studies in order to improve the BER performance is important. existing studies, BER performance of proposed chaos transceiver is possible to improve than the CDSK(Correlation Delay Shift Keying) system because it has characteristic that has very few addition elements like noise signal except for the desired signal. Chaos communication system has many symbols because it spreads according to characteristic of chaos map. Therefore, study that can have the good data rate in chaos communication system is required. Information bits of existing chaos modulation system are modulated as -1 and 1 on the basis of BPSK system. However, instead of BPSK system, if chaos communication system is applied high level modulation systems such as QPSK system and 16QAM system, it is possible to have good data rate because more data are transmitted at a time. In the paper, when QPSK system and 16QAM system are applied to proposed chaos transceiver in existing study, we evaluate the SER(Symbol Error Rate) performance and compare the each performance. Also, when QPSK system and 16QAM system are applied to proposed chaos transceiver, we evaluate the anti-jamming performance of proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.871-879
• /
• 2009

The performance variations of a spatio temporal smart antenna which is equipped at the basestation of CDMA cellular communication network due to the parametric change of multipath fading environment are studied in this paper. The smart antenna of interest employs space diversity based adaptive array structure in conjunction with rake receiver that has fingers the number of which is the same as that of multipath links. The beamforming is achieved via LMS(Least Mean Square) algorithm in which a reference signal is generated using decision directed formula. It has been shown by computer simulation that the performance of our smart antenna of interest depends significantly upon not only the degree of desired signal's DOA(Direction of Arrival)spread but the number of fingers of the rake receiver. The relative insensitivity of the smart antenna's performance on desired signal's delay spread has also been observed. Computer simulation has shown that the increase of the number of fingers brings in a nonlinear enhancement of the performance of our smart antenna. The renewal of weight vector in the beamforming procedure is taken place at post PN despread stage.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.19-24
• /
• 2008

In this paper, we describe the fabrication process and the characteristics of polarization maintaining photonic crystal fibers (PM-PCFs). The PM-PCF is fabricated by stack-and-draw method, i.e., stacking silica capillary tubes (making a PM-PCF preform) and drawing to optical fiber. Firstly, a PM-PCF preform is formed by stacking two kinds of capillary tubes around a solid silica rod and jacketing these stacked tubes with an outer silica tube (out-jacket tube). Later, the desired preform is drawn to a fiber in a high temperature drawing tower. We also compare the polarization properties such as polarization dependent loss, birefringence, and differential group delay of the fabricated PM-PCF with those of the conventional PANDA PM fiber.