• Journal of Welding and Joining
• /
• v.24 no.5
• /
• pp.29-36
• /
• 2006

In this study, an experimental method for the selection of optimal welding condition was proposed in the fillet weld which was done over the tack weld. This method used the response surface analysis in which the leg length and the reinforcement height were chosen as the quality variables of the weld bead profile. The overall desirability function, which was combined desirability function fur the two quality variables, was employed as the objective function for getting the optimal welding condition. In the experiments, the target values of the leg length and the reinforcement height are 6m and zero respectively for the horizontal fillet weld of 10mm thickness mild steel. The optimal welding conditions could predict the weld bead profile(leg length and reinforcement height) as 6.00mm and 0.19mm without tack weld and 6.00mm and 0.48mm with tack weld. from a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.629-638
• /
• 2016

Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the cost of the ingredients is the lowest, yet satisfying the required performance of concrete. In this study, a statistical model was carried out to model a cost effective optimal mix proportioning of high strength self-compacting concrete (HSSCC) using the Response Surface Methodology (RSM). The effect of five key mixture parameters such as water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content on the properties and performance of HSSCC like compressive strength, passing ability, segregation resistance and manufacturing cost were investigated. To demonstrate the responses of model in quadratic manner Central Composite Design (CCD) was chosen. The statistical model showed the adjusted correlation coefficient R2adj values were 92.55%, 93.49%, 92.33%, and 100% for each performance which establish the adequacy of the model. The optimum combination was determined to be $439.4kg/m^3$ cement content, 35.5% W/B ratio, 50.0% fine aggregate, $49.85kg/m^3$ fly ash, and $7.76kg/m^3$ superplasticizer within the interest region using desirability function. Finally, it is concluded that multiobjective optimization method based on desirability function of the proposed response model offers an efficient approach regarding the HSSCC mixture optimization.

• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.95-101
• /
• 2009

In case of manufacturing the high quality welds or pipeline, the full penetration weld has to be made along the weld joint. Thus the root pass welding is very important and has to be selected carefully. In this study, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. In the experiments, the target values of the back bead width and the height are 6mm and zero respectively for the V-grooved butt weld joint of 8mm thickness mild steel. The optimal welding conditions could predict the back bead profile(bead width and height) as 6.003mm and -0.003mm. From a series of welding test, it was revealed that a uniform and full penetration weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.605-614
• /
• 2007

Feeding pigs used to be a means of managing domestic resources that may otherwise have been wasted into valuable animal protein. Feeding pigs thus was a form of husbandry. Following recent rapid industrial development, pig rearing has changed from extensive to intensive, but this transformation has been associated with major concerns. The concentration of large amounts of pig manure in small arrears is environmentally hazardous. Moreover, high densities of animals in intensive production systems also impose a health threat for both animals and humans. Furthermore, the use of growth promoters and preventive medicines for higher production efficiencies, such as in-feed antibiotics, also induces microbial resistance thus affects human therapeutics. In addition, consumers are questioning the ethics of treating animals in intensive production systems. Animal welfare, environmental and bio-safe issues are re-shaping the nature of pig production systems. Feeding pigs thus involves not only the consideration of economic traits, but also welfare traits and environmental traits. Thus, a focus on technological feasibility, environmental sustainability and social desirability is essential for successful feeding operations. Feeding pigs now involves multiple projects with different sustainability goals, but goal conflicts exist since no pattern or scenario can fulfill all sustainability goals and the disagreements are complicated by reduced or even no use of in-feed antibiotics. Thus it is difficult to feed pigs in a manner that meets all goals of high quality, safe product, eco- and bio-sustainability, animal welfare and profit. A sustainable pig production system thus requires a prioritization of goals based on understanding among consumers, society and producers and needs to view from both a local and global perspective.

• Science of Emotion and Sensibility
• /
• v.7 no.2
• /
• pp.195-201
• /
• 2004

This study investigated the relationship between the physical features and personality impression of faces. Subjects were exposed to male and female facial photographic images. Using 7-points scales, subjects were asked to rate 31 personality traits. The three factors extracted from factor analysis were labeled social desirability, activity, and intelligence. The analysis of correlation between physical features and factor scores of faces indicated that there is a significant correlation between features of eye of male faces and intelligence and between features of chin of female faces and intelligence and social desirability. These results suggested that subjects judged the personality impression, based on different physical features in male and female feces.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.86-92
• /
• 2010

In GMAW processes, bead geometry is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage, welding speed, shielding gas and so on. Thus the welding condition has to be selected carefully. In this paper, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the GMA V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. Through the experiments, the target values of the back bead width and the height were chosen as 4mm and 1mm respectively for the V-grooved butt weld joint. From a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.11a
• /
• pp.50-51
• /
• 2003

• Journal of the military operations research society of Korea
• /
• v.7 no.1
• /
• pp.118-138
• /
• 1981

In many response surface optimization problems for industrial processes, there are more than two responses of interest, and we want to find the optimal levels of the factors that influence the responses. This paper is to propose how to set up the desirability functions to find the optimum for a given set of data, and to propose how to analyse the data and the desirability functions to determine an optimal operating condition for the factors. To implement the proposed method in practice, a FORTRAN computer program was written and explained. Finally, an industrial example is illustrated to explain the proposed technique and the source list of the computer program is attached for the users.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.287-296
• /
• 1998

We often have multiple quality characteristics to develop, improve and optimize industrial processes and products. It is not easy to find optimal control factor setting when there are multiple quality characteristics, since there will be conflict among the selected levels of the control factors for each individual quality characteristic. In this paper we propose a desirability function approach and devise a scheme which gives a systematic way of solving multiple quality characteristic problems. A numerical example is provided.