• IE interfaces
• /
• v.10 no.2
• /
• pp.109-114
• /
• 1997

The tread pattern of tire is represented by a great number of design factors, such as groove breadth of circumference direction, breadth direction, rib breadth, block length, kerfs, tread breadth and tread radius, etc. It is not efficient in time and cost to analyze the rolling resistance for a great number of real tread pattern, because It requires lots of pattern forming handwork. In order to optimize tread pattern for rolling resistance, the experiment is planed and analyzed by Taguchi's robust design methods. We identified the important design factors for Rolling Resistance, determined the optimal condition and calculated prediction value which is related. Using the experiment data and the analyzed data, we developed the program which could predict Rolling Resistance. It is expected that time and cost may be reduced in designing and developing new tire tread pattern.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.364-370
• /
• 2008

This research aims to recognize necessity of modern expression of traditional pattern, understand the matter which is expressed when developing design using traditional pattern, and find the solutions. As the solutions, this research presents design of traditional pattern using symmetry concept and works on the possibility of symmetry as the pattern design. So this research carried out in-depth interview to textile designer working at Gyeongsangnam-do, analyzed the substances. The main results are as follows. First, the presented problems of developing common pattern design and designing using traditional pattern show the necessities for adequate harmony among conception of creative idea, traditional pattern and present pattern. As the solution, the efficient design principles are required. Second, the seven traditional figures can present design applying symmetry, also draw the 8 mapping models for the visuality and utilization. Third, the symmetry-applied traditional pattern design makes it possible for the traditional figure to be represented with the creative and modern sense and provides easier way to the design development by complementing the pattern design formation. As the result, symmetry-utilized traditional pattern design improvement shows the expectation that it will increase the design development ability and ease the figure drawing. In addition, the pattern development which can be applied to any figure presents the time efficiency as well as possibility of the high added value textile industry.

• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.760-769
• /
• 2007

Cultural commodity is a tourism souvenir for tourists with a high added value in terms of economy. When it excellently represents the region and is based upon its tradition, the positive images of the place can be originated. In this way, the formation of benevolent images has economically considerable effects that can promote the competitive power of the area. The purpose of this study is to develop the pattern design of cultural commodity related to Hampyeong Butterfly Festival. The software to be used is Adobe illustrator CS2, which is a Vector Graphic software, and by utilizing the program, the pattern for the cultural goods will be produced. The forms of the pattern are All over Pattern, which is one of the arrangement methods used the most in a necktie field, and Stripe Pattern. After designing with those two patterns, the design is applied on neckties. Like this, by designing through the Vector Graphic software which we can easily get an access to, the concept of design is visualized; therefore, we can prevent the commodity development that can be conducted out of the concept. By making it possible to visualize the examination by various forms or color mixture, the time is shortened, and throughout reproduction of the object, adjustment of the size, colorway, and reusing or remanufacturing the image, we can check the result of design before hand to reduce the time and expenses required.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.4
• /
• pp.461-470
• /
• 2004

This paper is to design the user interface of the groundwater well based on an object oriented. In order to implementation geographic data base of the an complex geo-object of the real world, this paper is the study of analysis pattern at the level By specifying the pattern appropriate to the application domain and designing the analysis pattern using the UML based on the object oriented methodology, this paper shall contribute to enhance the reuse of components that can develop and distribute a large scale open system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.3
• /
• pp.457-467
• /
• 2015

The demand for coverall-type protective clothing are increasing in many industrial fields; however, it is impossible to evaluate the wearers' apparel fit because there is no commercialized pattern in the market. This study produces a manual for the process of acquiring patterns by separating PPE products into pieces to provide information on acquiring patterns. The analysis was on coverall-type non woven protective clothing in the domestic market, and 4 panels examined the validity, reliability, and efficiency of various possible methods on each step of process. Five steps were conducted to acquire patterns removing wrinkles, marking seams lines, separating seams, and pattern completing. The process of converting these into pattern files was designed through three procedures of digitizing, editing, and exporting and detailed stages. Fitting tests were undertaken, real patterns by actual modeling and pattern files by virtual modeling; all showed similar forms with outfits wearing ready-made protective coveralls. This study sought the most efficient and objective method of virtual modeling and proposed it as a manual. It is expected for the pattern reverse-designing manual through products analysis presented in this study that would be a helpful addition of information to the pattern tracing of pattern-less clothing products.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2011.05a
• /
• pp.69-70
• /
• 2011

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.7
• /
• pp.23-29
• /
• 1992

In this paper, a method of representing the pattern classifier as a collection of hypercubic regions is proposed. This representation has following advantages over the conventional ones : 1) a simple form of human knowledge can be used in designing the classifier, 2) the form of the classifier is suit for the rule-based system, and 3) this can reduce the classification time. A method of synthesis of the classifier under this representation is also proposed and the experimental result shows that the proposed method is faster than the well-known nearest neighbor classifier.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.4
• /
• pp.530-537
• /
• 2000

The purpose of this study is to develop the measuring tool that can grasp the relationship between body and pattern, the result can be directly digitalized and developed as the pattern as body form is. There are 6 measurements; 1) the width of front and rear neck 2) the slant degree of shoulder 3) the degree of protrusion of breasts and scapulae 4) the separation of front and rear board 5) space between body and clothes 6) vertical strand in the clothes Developed measuring tool is handy in un. in which points of body to be measured are small, and it has the capability of designing the high fitness for body. The measurer developed through this study is named as $\ulcorner$Somato-pattern Measurer$\lrcorner$, size paper is named$\ulcorner$Somato-pattern Paper$\lrcorner$and the pattern made by$\ulcorner$Somato-pattern Measurer$\lrcorner$is named$\ulcorner$Somato-pattern$\lrcorner$respectively by our team. The result of this study is thought to make a great contribution to solving the various problems which can be derived in the time of pattern design because of the difference of physical forms in the same size as well as the difference between the factor of size and that of form in body.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.159-170
• /
• 2006

This study aims to examine the expressive properties of contemporary corset, and to develop designs and produce patterns for corset look clothes. Through these courses, it develops a pattern that may all meet the exactness, functionality and aesthetic aspects of a pattern and provides materials that may help create a corset look design in the course of actuallymaking a garment. Based on the elements mentioned above, a total of three (3) real works were developed and their patterns were created. The patterns include two (2) flat patterns and one (1) patterns using the draping method. The results found in the course of creating works and patterns are as follows: With new corset look designs, this study was able to artificially highlight the body and express the beauty of costume through revelation of the body In addition, it explored the possibility that the phenomenon that underwear becoming outerwear may be a new idea in dress designing.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.47-52
• /
• 2001

Rapid Prototyping(RP) has been widely applied in designing and developing process of new products. RP can reduce the lead time and expense required to bring a new product form initial concept to production. Among several RP process can dramatically reduce the total build time and be applied for fabrication of large-sized and free form object because it uses in LOM the paper thickness is 0.05∼0.38mm as deposition feature segment. In this study, mechanical properties of pattern with LOM system is studied for optimal design of sand mold casting. The main result is that tensile, compressive strength and pattern size are significantly affected by temperature of hot roll.